1. Pengenalan
This manual provides essential information for the safe and efficient use of your Segway eKickScooter Flash Charger. Please read this manual thoroughly before using the charger to ensure proper operation and to prevent damage to the product or injury to yourself.
The Segway eKickScooter Flash Charger is designed to provide fast and reliable charging for compatible Segway eKickScooter models. It features a 70W output and smart LED indicators for charging status.
Image: The Segway eKickScooter Flash Charger, a compact black charging unit with a green LED indicator and the Segway logo.
2. Arahan Keselamatan Penting
Untuk mengurangkan risiko kecederaan atau kerosakan, patuhi langkah keselamatan berikut:
- Use only with compatible Segway eKickScooter models as specified in this manual.
- Keep the charger dry and away from water or moisture. This product has an IP20 rating, meaning it is for indoor use only.
- Jauhkan daripada kanak-kanak.
- Stop charging immediately if you notice any unusual smell, noise, or excessive heat from the charger or scooter battery. Disconnect the charger from the power outlet and the scooter.
- Disconnect the charger from the power outlet and the scooter once charging is complete.
- Do not attempt to disassemble, modify, or repair the charger. Refer all servicing to qualified personnel.
- Elakkan daripada menjatuhkan pengecas atau terkena impak yang kuat.
The charger incorporates multiple safety features to protect the battery and ensure reliable performance:
- Lebih Voltage Perlindungan
- Di bawah Voltage Perlindungan
- Lebih Perlindungan Semasa
- Perlindungan Litar pintas
- Lebih Perlindungan Suhu
- Thermal Decay Test
- Perlindungan Masa
Image: A diagram showing a microchip and text listing the 7 layers of safety protection integrated into the flash charger, including over voltage, di bawah voltage, over current, short circuit, over temperature, thermal decay test, and timing protection.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej anda:
- Segway eKickScooter Flash Charger (x1)
- AC Power Cord (x1)
- Manual Pengguna (x1)
4. Persediaan
Follow these steps to prepare your charger for use:
- Unpack the charger and AC power cord from the packaging.
- Connect one end of the AC power cord to the charger's input port.
- Plug the other end of the AC power cord into a standard wall outlet (100-240V AC).
- Ensure the charger's LED indicator is off or green (if no load is connected).
5. Arahan Operasi
To charge your Segway eKickScooter:
- Ensure your eKickScooter is powered off.
- Locate the charging port on your eKickScooter.
- Connect the charger's output plug to the eKickScooter's charging port.
- Once connected, the charger's LED indicator will turn merah, indicating that charging is in progress.
- When the eKickScooter battery is fully charged, the LED indicator on the charger will turn hijau.
- Disconnect the charger from the eKickScooter, then unplug the AC power cord from the wall outlet.
The Flash Charger is designed for faster charging, significantly reducing the time required to fully charge your scooter.
Image: A graphic illustrating the charger's capability for up to 3X high-power flash charging, highlighting 210W peak output power compared to 70W normal output power.
Image: A comparison showing that the Flash Charger can reduce overall charging time by up to 50%. For example, charging a Ninebot F3/F3 Pro takes approximately 4 hours with the Flash Charger versus 8 hours with a normal charger.
6. Penyelenggaraan
Proper care ensures the longevity of your charger:
- Pembersihan: Disconnect the charger from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storan: Simpan pengecas di tempat yang sejuk dan kering apabila tidak digunakan. Elakkan suhu yang melampau dan cahaya matahari langsung.
- Pemeriksaan: Periodically inspect the charger and power cord for any signs of damage, such as frayed wires or cracked casing. Do not use if damaged.
7. Penyelesaian masalah
If you encounter issues with your charger, refer to the following table:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Charger LED is off, no charging. | Tiada kuasa dari soket; sambungan longgar; pengecas rosak. | Check wall outlet with another device. Ensure all connections are secure. If problem persists, contact customer support. |
| Charger LED remains green when connected to scooter. | Scooter battery is already full; poor connection to scooter; scooter charging port issue. | Verify scooter battery level. Reconnect charger to scooter. Ensure charging port on scooter is clean and undamaged. |
| Charger or scooter becomes unusually hot, emits strange smell/noise. | Overheating; internal fault. | Immediately disconnect charger from wall and scooter. Do not use the charger. Contact customer support. |
8. Spesifikasi Teknikal
| Ciri | Spesifikasi |
|---|---|
| Nama Model | NBW54D601D3D01 (PH1104) |
| Input | 100–240V ~ 50/60Hz 2.5A Max |
| Keluaran | 53.6V ⎓ 1.3A (Max 54.6V) |
| kuasa | 70W |
| Dimensi (L × W × H) | 118 × 83 × 168 mm (4.7 × 3.3 × 6.6 inci) |
| Suhu Operasi | -10°C hingga 40°C (14°F hingga 104°F) |
| Penarafan IP | IP20 (Penggunaan dalaman sahaja) |
| Model yang Serasi | Segway MAX G3, F3, F3 Pro, GT3, ZT3 Pro |
| Pensijilan | UL, IEC |
Image: A table detailing the specifications of the Segway eKickScooter Flash Charger, including model, packaging dimensions, IP rating, output, and compatible scooter models.
9. Waranti dan Sokongan
Maklumat Waranti: The Segway eKickScooter Flash Charger comes with a 180-day warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or failure to follow instructions in this manual.
Sokongan Pelanggan: For technical assistance, warranty claims, or any questions regarding your Segway eKickScooter Flash Charger, please contact Segway customer support through their official weblaman web atau peruncit tempat produk dibeli. Sila sediakan nombor model dan tarikh pembelian anda semasa menghubungi sokongan.