DECAKILA 10-Speed Glass Jar Blender

Arahan Keselamatan Penting

Apabila menggunakan peralatan elektrik, langkah berjaga-jaga keselamatan asas hendaklah sentiasa diikuti untuk mengurangkan risiko kebakaran, kejutan elektrik dan/atau kecederaan kepada orang, termasuk yang berikut:

• Baca semua arahan sebelum mengendalikan pengisar.
• To protect against electrical hazards, do not immerse the blender base, cord, or plug in water or other liquids.
• Pengawasan rapi diperlukan apabila sebarang perkakas digunakan oleh atau berhampiran kanak-kanak.
• Cabut plag dari soket apabila tidak digunakan, sebelum memakai atau menanggalkan bahagian, dan sebelum membersihkan.
• Elakkan sentuhan dengan bahagian yang bergerak.
• Jangan kendalikan sebarang perkakas dengan kord atau palam yang rosak atau selepas perkakas tidak berfungsi atau terjatuh atau rosak dalam apa jua cara.
• Penggunaan lampiran yang tidak disyorkan atau dijual oleh pengilang boleh menyebabkan kebakaran, kejutan elektrik atau kecederaan.
• Jangan gunakan di luar rumah.
• Jangan biarkan kord tergantung di tepi meja atau kaunter atau menyentuh permukaan panas.
• Jauhkan tangan dan perkakas daripada bekas semasa mengadun untuk mengelakkan kemungkinan kecederaan teruk kepada orang atau kerosakan pada pengisar. Pengikis boleh digunakan tetapi hanya apabila pengisar tidak berfungsi.
• Bilahnya tajam. Kendali dengan cermat.
• Sentiasa kendalikan pengisar dengan penutup di tempatnya.
• Jangan campurkan cecair panas.
• This appliance is equipped with a thermostat protection system to prevent overheating. If the motor stops, unplug the blender and allow it to cool for at least 15 minutes before resuming use.

Produk Selesaiview

The DECAKILA KUJB046W blender is designed for efficient blending with its powerful motor and durable components. Familiarize yourself with its parts before use.

Komponen:

• Tapak Pengisar (Unit Motor)
• Glass Jar (1.5 Liters capacity)
• Lid with removable filler cap
• 6-Blade Stainless Steel Assembly (detachable)

Figure 1: Fully assembled DECAKILA KUJB046W Blender.

Figure 2: Blender base featuring the control panel with speed and function buttons.

Figure 3: Blender base and glass jar with its detachable blade assembly.

Figure 4: Glass blender jar with its lid and removable filler cap.

Persediaan

1. Bongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati. Simpan pembungkusan untuk penyimpanan atau pengangkutan masa hadapan.
2. Pembersihan Awal: Before first use, wash the glass jar, lid, and blade assembly in warm, soapy water. Rinse thoroughly and dry. Wipe the blender base with a damp kain. Jangan rendam tapak di dalam air.
3. Pasang balang: Ensure the blade assembly is securely attached to the bottom of the glass jar. Place the glass jar onto the blender base, aligning the tabs on the jar with the slots on the base. Turn the jar clockwise until it locks into place.
4. Tambah Bahan: Place your desired ingredients into the glass jar. Do not exceed the maximum fill line indicated on the jar. Securely place the lid on the jar and insert the filler cap.
5. Sambungkan Kuasa: Palamkan kord kuasa ke soket elektrik 120V standard.

Arahan Operasi

The DECAKILA KUJB046W blender offers 10 speed settings and a pulse function for versatile blending.

1. Hidupkan kuasa: Ensure the blender is properly assembled and plugged in. Press the "OFF" button to ensure the blender is in standby mode.
2. Pilih Kelajuan:
   • For continuous blending, select a speed from 1 to 10, or "LO" (Low) or "HI" (High) depending on the desired consistency. Lower speeds are suitable for lighter mixtures, while higher speeds are for tougher ingredients.
   • For short bursts of power, press and hold the "P" (Pulse) button. Release the button to stop. The pulse function is ideal for chopping or breaking down larger pieces.
3. Pengadunan: Allow the blender to run until the desired consistency is achieved. If ingredients stick to the sides, turn off the blender, remove the lid, and use a spatula to push them down. Replace the lid before resuming.
4. Matikan: Once blending is complete, press the "OFF" button and unplug the blender from the outlet.

Penting: Do not operate the blender continuously for more than 2 minutes. Allow a 1-minute rest period between cycles to prevent motor overheating. The built-in thermostat protection will automatically shut off the motor if it overheats. If this occurs, unplug the unit and let it cool for at least 15 minutes before restarting.

Pembersihan dan Penyelenggaraan

Pembersihan tetap memastikan jangka hayat dan kebersihan pengisar anda.

1. Cabut plag: Sentiasa cabut pengisar sebelum mencuci.
2. Buka: Remove the glass jar from the base. Carefully detach the blade assembly from the bottom of the jar. Remove the lid and filler cap.
3. Komponen Cuci: Wash the glass jar, lid, filler cap, and blade assembly in warm, soapy water. The 6 stainless steel blades are sharp; handle with extreme care. Rinse thoroughly and dry immediately to prevent water spots or corrosion.
4. Pangkalan Bersih: Wipe the blender base with a soft, damp cloth. Do not immerse the base in water or any other liquid. Do not use abrasive cleaners or scouring pads, as they may scratch the surface.
5. Storan: Reassemble the blender or store components separately once dry. The power cord features a stowable design for convenient and organized storage.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

This product is designed for durability and performance. For any issues or inquiries, please refer to your purchase documentation for specific warranty details and contact information for customer support.

A 30-day return policy may apply, as per retailer terms. Optional extended protection plans may be available from third-party providers at the time of purchase.