btfarm TL01-2
btfarm 6.6FT 400 LED Christmas Tree Lights with Remote (Model TL01-2)
Manual Arahan Pengguna
Produk Selesaiview
The btfarm 6.6FT 400 LED Christmas Tree Lights are designed for both indoor and outdoor decorative lighting. These lights feature a USB plug-in for versatile power options, a remote control for convenient operation, and multiple lighting modes with dimmable settings and a timer function. The flexible wire construction helps prevent tangling, making installation straightforward.

Imej: Selesaiview of the btfarm Christmas Tree Lights, showing the top ring, cascading light strands, USB plug, and remote control.
Apa yang Termasuk
- 1 x USB plug-in Christmas tree lights (6.6FT, 400 LED)
- 1 x Alat kawalan jauh
- 1 x Manual pengguna
Spesifikasi
| Jenama | btfarm |
| Nombor Model | TL01-2 |
| Panjang Cahaya | 6.6 kaki (2 meter) |
| Kiraan LED | 400 LEDs (16 strands, 25 LEDs each) |
| Suitable Tree Height | 5-7 kaki |
| Warna Cerah | Putih Hangat |
| Sumber Kuasa | USB Plug-in (Corded Electric) |
| Ciri Khas | Dimmable, Remote Controlled, Timer, Twinkling |
| Peringkat Perlindungan Ingress (IP). | IP65 (Lights only, USB plug is not waterproof) |
| Penggunaan Dalaman/Luar | Dalaman, Luaran |

Image: Diagram illustrating the dimensions of the light set, including the 9.8 cm top ring and 2-meter (6.6 ft) light strands, and showing suitability for 5-7 ft Christmas trees.
Arahan Persediaan
- Buka Bungkus Lampu: Carefully remove the lights from the packaging. The flexible wire design helps prevent tangling, but gentle handling is recommended.
- Position the Top Ring: Place the circular top ring of the light set over the top of your Christmas tree. Ensure it sits securely.
- Drape the Strands: Allow the 16 individual light strands to cascade down the tree evenly. Adjust them as needed to achieve desired coverage.
- Sambungkan Kuasa: Plug the USB connector into a compatible USB power source (e.g., USB wall adapter, power bank).
- Aktifkan dengan Jauh: After connecting the USB plug, use the remote control to turn on the lights.

Image: Visual guide showing three steps for easy installation: 1. Placing the ring on top of the tree, 2. Arranging the light strands, and 3. Plugging in the USB connector.
Arahan Operasi
The btfarm Christmas Tree Lights are operated using the included remote control. Ensure the remote is pointed towards the USB receiver for optimal functionality.
Fungsi Kawalan Jauh:
- HIDUP/MATI: Press the green "ON" button to turn the lights on, and the red "OFF" button to turn them off.
- MOD (1-8): Pilih daripada 8 mod pencahayaan yang berbeza:
- Gabungan
- Dalam gelombang
- Berurutan
- Slo-glo
- Chasing Flash
- Pudar perlahan
- Kilat Kelip
- Tetap Hidup
- PEMASA: Activate the built-in timer function. The lights will automatically turn off after 6 hours and turn back on after 18 hours, repeating the cycle.
- MALAM (+/-): Adjust the brightness level. There are 4 brightness settings: 25%, 50%, 75%, and 100%.

Image: The remote control displaying buttons for ON/OFF, Timer, Mode selection (1-8), and Dimming (+/-), with a visual representation of the 8 lighting modes on a Christmas tree.

Image: Illustration of the timer function (6 hours on/18 hours off) and the four dimmable brightness levels (25%, 50%, 75%, 100%) on a lit Christmas tree.
Video: Demonstrates the functionality of the USB Christmas Tree Lights with Remote, showcasing various lighting modes and dimming capabilities.
Penyelenggaraan
- Pembersihan: Lap lampu dengan kain lembut dan kering. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Storan: When not in use, carefully coil the light strands and store them in their original packaging or a suitable container in a cool, dry place. Avoid excessive bending or tangling.
- Pemeriksaan: Periodically inspect the wires and LED bulbs for any damage. Do not use if any damage is detected.
Menyelesaikan masalah
- Lampu tidak menyala:
- Ensure the USB plug is securely connected to a working power source.
- Verify that the remote control battery is functional and correctly inserted.
- Point the remote directly at the USB receiver (the small green box near the USB plug).
- Press the "ON" button on the remote after plugging in the USB.
- Jauh tidak bertindak balas:
- Periksa bateri kawalan jauh.
- Pastikan tiada halangan antara alat kawalan jauh dan penerima USB.
- Reduce the distance between the remote and the receiver.
- Lights are too dim/bright:
- Use the "DIM +" or "DIM -" buttons on the remote to adjust brightness.
Maklumat Keselamatan
- Palam USB: The USB plug is BUKAN kalis air. It must be kept dry and away from water and fire sources.
- Penilaian Kalis Air: The light strands themselves have an IP65 waterproof rating, allowing them to withstand rain, snow, and frost.
- Vol. Rendahtage: Lampu beroperasi pada vol rendahtage design, ensuring they remain safe to touch even after prolonged use, making them suitable for environments with children and pets.
- Sumber Kuasa: Use only with compatible USB power sources.
- Terlalu panas: If the USB plug or any part of the lights becomes excessively hot, immediately unplug the device and discontinue use.
- Pemasangan: Ensure proper installation to prevent damage to the lights or injury.

Image: Depicts the lights on a Christmas tree outdoors in snowy conditions, highlighting their waterproof, snowproof, windproof, and cold-resistant features. A close-up shows the sealed LED bulbs.
Waranti dan Sokongan
For warranty information or product support, please refer to the contact details provided with your purchase or visit the btfarm official webtapak.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.