Manual Pengguna Casio G-Shock GD-010BBR-1

pengenalan

This manual provides detailed instructions for the operation and maintenance of your Casio G-Shock GD-010BBR-1 watch. This timepiece is designed for durability and functionality, featuring a robust black resin case and band with a striking red digital display. It is built to withstand challenging conditions, offering water resistance and various timekeeping features.

Imej: Depan view of the Casio G-Shock GD-010BBR-1 watch, highlighting its black resin construction and the vibrant red digital display. The display shows the day and date as 'SUN 6-30' and the time as '10:58'. Various function indicators like MUTE, ALM, SIG, and ILLUMINATOR are also visible.

Persediaan

Tetapan Masa Awal

1. Tekan dan tahan butang SESUAIKAN button (top left) until the city code starts to flash. This indicates the setting mode.
2. Gunakan KE HADAPAN (bawah kanan) dan TERBALIK (top right) buttons to select your desired city code.
3. Tekan ke MODE button (bottom left) to cycle through the settings: DST (Daylight Saving Time), 12/24-hour format, Seconds, Hour, Minute, Year, Month, Day.
4. Untuk setiap tetapan, gunakan KE HADAPAN dan TERBALIK butang untuk menukar nilai.
5. Setelah semua tetapan dikonfigurasikan, tekan butang SESUAIKAN butang untuk keluar dari mod tetapan.

Mod Pengendalian

The watch features several operating modes accessible via the MODE butang.

Mod Penjagaan Masa

Memaparkan masa, hari dan tarikh semasa. Ini ialah mod lalai.

Mod Jam Randik

• Tekan MODE to navigate to the Stopwatch mode.
• Tekan MULAKAN (bottom right) to begin timing.
• Tekan MULAKAN sekali lagi untuk menjeda/menyambung semula.
• Tekan TETAP SEMULA (top right) to reset the stopwatch to zero.

Mod Penggera

• Tekan MODE to navigate to the Alarm mode.
• guna KE HADAPAN dan TERBALIK to select an alarm number (if multiple are available).
• Tekan SESUAIKAN untuk memasuki mod tetapan penggera.
• guna KE HADAPAN dan TERBALIK untuk menetapkan masa penggera.
• Tekan SESUAIKAN untuk mengesahkan dan keluar.
• Tekan PILIH (middle left) to toggle the alarm on/off. An "ALM" indicator will appear when active.

Illuminator (Backlight)

Tekan ke PENERANG button (usually the large button at the bottom center, or indicated by "LT" on the display) to illuminate the display for easy viewing in low light conditions. The "LT" indicator on the display signifies the auto-light feature is active if configured.

Penyelenggaraan

Tahan Air

The GD-010BBR-1 is water resistant to 20 BAR (200 meters). This means it is suitable for showering, swimming, and diving. Do not operate buttons while the watch is wet or submerged to prevent water ingress.

Pembersihan

Wipe the watch with a soft, dry cloth. For stubborn dirt, use a mild soap solution and a soft brush, then rinse thoroughly with fresh water and dry completely. Avoid using chemical cleaners or solvents.

Penggantian Bateri

The watch uses 1 LR44 battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by an authorized Casio service center to ensure proper sealing and water resistance.

Menyelesaikan masalah

• Paparan kosong atau malap: Check battery level. Replace battery if necessary. Ensure watch is not exposed to extreme temperatures.
• Butang tidak bertindak balas: Ensure the watch is not in a locked mode (if applicable). If wet, dry thoroughly. If issue persists, a service check may be required.
• Masa tidak tepat: Re-adjust time settings as per the "Initial Time Setting" section. Check for DST settings.
• Water inside display: Immediately cease use and take the watch to an authorized service center. This indicates a breach in water resistance.

Spesifikasi

Waranti dan Sokongan

Untuk maklumat jaminan dan sokongan pelanggan, sila rujuk laman web rasmi Casio website or contact your local authorized Casio dealer. Keep your proof of purchase for warranty claims.

Casio Rasmi Webtapak: www.casio.com