Jumper T14 2.4GHz ELRS Radio Controller User Manual

1. Pengenalan

This manual provides comprehensive instructions for the safe and effective operation of your Jumper T14 2.4GHz ELRS Radio Controller. Please read this manual thoroughly before using the device to ensure proper setup, optimal performance, and to prevent damage or injury. Keep this manual for future reference.

2. Maklumat Keselamatan

Always operate the radio controller in a safe and responsible manner. Failure to follow safety guidelines can result in property damage, serious injury, or even death.

• Persekitaran: Operate in open areas, away from people, animals, and obstacles. Avoid flying near power lines, roads, or crowded places.
• Keselamatan Bateri: Use only recommended batteries. Do not overcharge or over-discharge. Store batteries in a fireproof bag.
• Pemeriksaan Pra-Penerbangan: Always perform a thorough pre-flight check of your aircraft and radio controller before each use.
• Perisian tegar: Keep your radio controller's firmware updated to the latest stable version for optimal performance and security.
• Air dan Kelembapan: Keep the radio controller away from water and high humidity.
• Kanak-kanak: This product is not a toy. Keep out of reach of children under 16 years of age. Adult supervision is required for minors.

3. Produk Lebihview

The Jumper T14 is a compact and ergonomic 2.4GHz ELRS radio controller designed for FPV drones and other RC applications. It features CNC Hall Gimbals, an OLED screen, and runs on EdgeTX firmware.

3.1. Radio System Components

Rajah 3.1: Detailed diagram of the Jumper T14 Radio Controller, highlighting key components and controls on the front, back, and side views. This includes switches, dials, gimbals, screen, module compartment, and charging port.

• Panel Depan:
  • VS-M CNC Hall Gimbals: High-precision gimbals for smooth control.
  • 2.42" OLED Screen: Clear display for EdgeTX interface.
  • Butang Kuasa: For turning the unit on/off.
  • Switches (2-position, 3-position): Configurable for various functions.
  • Dials (S1, S2): Rotary controls for fine adjustments.
  • Butang Potong: For adjusting stick trims.
  • SYS Button: System menu access.
  • Butang HALAMAN: Page navigation.
  • RTN Button: Return/back button.
  • Lampu Penunjuk Status: Provide operational feedback.
• Panel belakang:
  • Standard JR Module Compartment: For external RF modules.
  • External Cooling Fan: Helps dissipate heat from internal components.
  • Dulang Bateri: menempatkan bateri.
• Side/Top Panel:
  • USB-C 10W Fast Charging Port: Untuk pengecasan dan sambungan data.
  • Butang DFU: Device Firmware Upgrade mode button.
  • Trainer Port: For connecting to a simulator or another radio.
  • Suis seketika: Spring-loaded switch.
  • Latching Switch: Stays in position until toggled.
  • Adjustable and Foldable Antenna: Untuk penghantaran isyarat.
  • Reserved Antenna DIY Port: For custom antenna modifications.
  • Pemegang boleh lipat: For portability and comfortable grip.

3.2. Key Features Visuals

Rajah 3.2: Depan view of the Jumper T14, showcasing the dual gimbals, OLED screen, and various control switches and dials.

Rajah 3.3: belakang view of the Jumper T14, showing the JR module bay, cooling fan, and battery compartment cover.

Rajah 3.4: Detail of the USB-C port, used for charging the internal battery and connecting to a computer for firmware updates or simulator use.

Rajah 3.5: Illustration highlighting the precision CNC Hall Sensor Gimbals, which provide accurate and durable control inputs.

Rajah 3.6: Diagram illustrating the internal cooling fan system, designed to maintain optimal operating temperatures for the internal electronics.

Rajah 3.7: View of the bi-directional foldable antennas, which can be adjusted for optimal signal transmission and folded for compact storage.

4. Persediaan

4.1. Pemasangan dan Pengecasan Bateri

The Jumper T14 uses a rechargeable battery (not specified in input, assuming common RC battery types like 18650 or LiPo). Ensure the battery is fully charged before first use.

1. Buka penutup petak bateri di bahagian belakang radio.
2. Insert the battery, ensuring correct polarity if applicable.
3. Tutup penutup petak bateri dengan selamat.
4. Connect the supplied USB-C cable to the USB-C port on the top of the radio and to a compatible USB power adapter (e.g., 5V/2A).
5. The OLED screen or indicator lights will show charging status. Disconnect once fully charged.

4.2. Initial Power On and EdgeTX Setup

Upon first power-on, the radio will guide you through initial setup steps for the EdgeTX firmware.

1. Press and hold the Power Button until the OLED screen illuminates.
2. Follow the on-screen prompts to calibrate gimbals, set date/time, and configure basic radio settings.
3. Navigate menus using the scroll wheel and SYS/PAGE/RTN buttons.

4.3. ELRS Binding

To bind your Jumper T14 with an ELRS receiver, follow the standard ELRS binding procedure:

1. Ensure your ELRS receiver is powered on and in binding mode (typically by cycling power three times).
2. On the T14, navigate to the ELRS LUA script or the internal module settings within EdgeTX.
3. Select the "Bind" option. The radio will transmit a binding signal.
4. Once the receiver's LED indicates a successful bind (refer to your receiver's manual), the process is complete.

5. Arahan Operasi

5.1. Kawalan Asas

• Gimbal: Control the primary movements of your aircraft (Throttle, Rudder, Aileron, Elevator).
• Suis: Used for arming, flight modes, special functions, etc. Assign functions in EdgeTX.
• Dail: Typically used for fine-tuning parameters like camera tilt, gain, or volume.
• Butang Potong: Adjust the neutral position of the gimbals for stable flight.

5.2. Model Setup in EdgeTX

EdgeTX offers extensive customization for different models. Refer to the official EdgeTX documentation for detailed instructions on advanced model setup.

1. From the main screen, press the SYS button to enter the System menu.
2. Navigate to "Model Select" or "Model Setup" to create a new model or edit an existing one.
3. Configure internal or external RF module settings (e.g., ELRS protocol, power output).
4. Set up mixes, inputs, outputs, and special functions according to your aircraft's requirements.

6. Penyelenggaraan

• Pembersihan: Use a soft, dry cloth to clean the radio controller. Avoid abrasive cleaners or solvents.
• Storan: Store the radio in a cool, dry place, away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.
• Kemas kini Firmware: Regularly check for and install the latest EdgeTX firmware updates from the official EdgeTX webtapak (www.edgetx.org) untuk memastikan prestasi optimum dan akses kepada ciri baharu.
• Penjagaan Gimbal: The CNC Hall Gimbals are durable, but avoid excessive force or impact. Keep them free from dust and debris.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information and technical support, please refer to the official ARRIS webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk tuntutan waranti.

Pengeluar: pelompat

Jenama: ARRIS

Sokongan dalam talian: Visit the ARRIS official website for FAQs, firmware downloads, and contact information. Kedai ARRIS di Amazon