1. Pengenalan
The Wonrabai ESP32-S3 1.75-inch AMOLED Round Touch Display Development Board is a versatile and powerful platform designed for various embedded projects, including wearables, IoT devices, and AI speech interaction applications. It integrates an ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, a high-resolution AMOLED capacitive touch display, and a comprehensive suite of peripherals for advanced development.
This manual provides essential information for setting up, operating, and maintaining your development board, ensuring you can effectively utilize its capabilities.
2. Ciri-ciri Utama
The ESP32-S3 Development Board offers a rich set of features:
- Pemproses: ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.
- Ketersambungan: Menyokong Wi-Fi 2.4GHz (802.11 b/g/n) dan Bluetooth 5 (LE) dengan antena terbina dalam.
- Ingatan: Built-in 512KB SRAM, 384KB ROM, onboard 8MB PSRAM, and external 16MB Flash memory.
- paparan: 1.75-inch AMOLED capacitive touch display with 466 × 466 resolution, 16.7M colors, and 178° wide viewsudut ing.
- Audio: Onboard audio codec for high-quality audio processing, dual digital microphone array for noise reduction and echo cancellation, and support for AI speech interaction.
- Penderia: Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion detection.
- Pengurusan tenaga: AXP2101 IC for efficient power management, supporting multiple voltage outputs, battery charging, and optimization.
- RTC: Onboard PCF85063 RTC chip for uninterrupted timekeeping.
- Pengembangan: TF card slot for extended storage, 8PIN 2.54mm header for GPIO and UART, and reserved pads for I2C and expanded IO interfaces.
- Antara muka: Type-C connector for power and data.
Gambar 2.1: Lebihview of ESP32-S3 Development Board Features
Figure 2.2: ESP32-S3-Touch-AMOLED-1.75 Version Options and Feature List
Figure 2.3: AMOLED Screen Benefits and Wide Viewsudut
Figure 2.4: Onboard Audio Codec and AI Speech Interaction
Figure 2.5: Development Environment and Wireless Support
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej anda:
- ESP32-S3-Touch-AMOLED-1.75 with case x1
- Pembesar suara 8Ω 2W x1
Rajah 3.1: Kandungan Pakej
4. Perkakasan Terlaluview
Familiarize yourself with the components and interfaces of the ESP32-S3 Development Board:
Figure 4.1: ESP32-S3 Development Board Component Layout
| Tidak. | Komponen | Penerangan |
|---|---|---|
| 1 | ESP32-S3R8 | The SoC with Wi-Fi and Bluetooth, up to 240MHz operating frequency, with onboard 8MB PSRAM. |
| 2 | Antena atas kapal | For 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) connectivity. |
| 3 | IPEX1 connector | Switching to use an external antenna via resoldering an onboard resistor. |
| 4 | butang PWR | For system power ON/OFF, supports custom function development. |
| 5 | Butang BOOT | For device startup and function debugging. |
| 6 | MX1.25 2P speaker header | Connects to the included 8Ω 2W speaker. |
| 7 | TCPA9554 | GPIO expander chip. |
| 8 | PCF85063 | Real-Time Clock (RTC) chip. |
| 9 | QMI8658 | 6-axis IMU (3-axis accelerometer and 3-axis gyroscope). |
| 10 | AXP2101 | Highly integrated power management IC. |
| 11 | 2.54mm 8PIN header | For debugging and connecting peripherals (3 × GPIO and 1 × UART). |
| 12 | Dwi mikrofon | With onboard echo cancellation circuit, enabling higher-quality audio capture. |
| 13 | IPEX 1 GPS connector | For connecting GPS antenna (for the GPS version only, with built-in LC76G module). |
| 14 | Port jenis-C | ESP32-S3 USB interface, for program burning and log printing. |
| 15 | ES7210 | Echo cancellation algorithm chip, for reducing echo and enhancing audio capture accuracy. |
| 16 | MX1.25 Lithium battery header | MX1.25 2P connector, for 3.7V Lithium battery, supports charging and discharging. |
5. Arahan Persediaan
Ikuti langkah ini untuk persediaan awal:
- Connect Speaker: If using the included speaker, connect its MX1.25 connector to the corresponding header (No. 6 in Figure 4.1) on the development board.
- Sambungan Kuasa: Connect the development board to a power source using a Type-C USB cable. The Type-C port (No. 14 in Figure 4.1) also serves as the data interface for programming and debugging.
- Bateri (Pilihan): For portable applications, connect a 3.7V Lithium battery to the MX1.25 battery header (No. 16 in Figure 4.1). The board's power management IC will handle charging and discharging.
- Kuasa Awal Hidup: Press the PWR button (No. 4 in Figure 4.1) to power on the device. The AMOLED display should illuminate.
- Persekitaran Pembangunan: For programming, refer to the online tutorial for setting up your preferred development environment (e.g., ESP-IDF, Arduino IDE).
6. Arahan Operasi
Basic operation of the ESP32-S3 Development Board:
- Hidupkan/Mati Kuasa: Use the PWR button (No. 4) to turn the device on or off.
- Interaksi Paparan: The 1.75-inch AMOLED display is capacitive touch-enabled. Interact with on-screen elements by tapping or swiping as programmed.
- AI Speech Interaction: Utilize the dual digital microphones (No. 12) for voice input. The onboard audio codec and echo cancellation chip enhance audio quality for speech recognition. Access to online large model platforms (e.g., DeepSeek, Doubao, GPT) can be integrated through custom firmware.
- Butang Boleh Aturcara: The PWR and BOOT buttons can be configured for custom functions within your application.
- Penyimpanan Data: Insert a TF card into the TF card slot for extended storage and data transfer, suitable for logging or media playback.
- Penderiaan Pergerakan: The QMI8658 6-axis IMU (No. 9) can detect motion gestures, count steps, and provide orientation data for various applications.
7. Penyelenggaraan
To ensure the longevity and optimal performance of your development board:
- Pembersihan: Use a soft, dry cloth to clean the display and case. Avoid abrasive cleaners or solvents.
- Storan: Store the board in a cool, dry environment, away from direct sunlight and extreme temperatures.
- Pengendalian: Handle the board with care to avoid physical damage. Avoid static discharge by working on an anti-static mat if possible.
- Kemas kini Firmware: Regularly check the official resources for firmware updates to benefit from performance improvements and new features.
8. Penyelesaian masalah
Jika anda menghadapi masalah, rujuk kepada masalah dan penyelesaian biasa berikut:
- Peranti tidak dihidupkan:
- Ensure the Type-C cable is securely connected to a working power source.
- If using a battery, ensure it is charged and properly connected.
- Press the PWR button firmly.
- Paparan kosong atau tidak responsif:
- Verify the device is powered on.
- Check your firmware for display initialization errors.
- Ensure the display driver (CO5300) and touch chip (CST9217) are correctly configured in your code.
- Isu sambungan Wi-Fi atau Bluetooth:
- Confirm that the onboard antenna is not obstructed.
- Check your code for correct Wi-Fi/Bluetooth initialization and credentials.
- Ensure the device is within range of the access point or Bluetooth device.
- Microphone or speaker not working:
- Ensure the speaker is correctly connected to the MX1.25 header.
- Verify audio codec and microphone drivers are correctly implemented in your firmware.
- Check volume settings in your application.
For more detailed troubleshooting and development resources, please refer to the online tutorial and community forums.
9. Spesifikasi
| Ciri | Perincian |
|---|---|
| Dimensi Produk | 0.06 x 1.57 x 1.57 inci |
| Berat Barang | 1.06 auns |
| Nombor Model Item | ESP32-S3-Touch-AMOLED-1.75-B |
| Saiz Paparan Skrin Berdiri | 1.75 inci |
| Nisbah Aspek | 1:1 |
| Jenis Skrin | AMOLED, Capacitive Touch |
| Masa Tindak Balas | 5 milisaat |
| Skrin Warna | ya |
| Pemproses | ESP32-S3R8 Xtensa 32-bit LX7 dual-core |
| Frekuensi Utama | Sehingga 240MHz |
| Wi-Fi | 2.4GHz (802.11 b/g/n) |
| Bluetooth | Bluetooth 5 (LE) |
| SRAM | 512KB |
| ROM | 384KB |
| PSRAM | 8MB (dalam peranti) |
| Memori Kilat | 16MB (external) |
| Resolusi Paparan | 466 × 466 piksel |
| Warna Paparan | 16.7M |
| Viewsudut | 178° |
| IMU | QMI8658 6-paksi (pecutan 3-paksi, giroskop 3-paksi) |
| Cip RTC | PCF85063 |
| Pengurusan Kuasa | AXP2101 IC |
| Pengembangan | TF card slot, 8PIN 2.54mm header (GPIO, UART) |
| Penyambung | Jenis-C |
Figure 9.1: Outline Dimensions
10. Waranti dan Sokongan
For comprehensive online tutorials, usage guides, development resources, and support, please visit the official resource page:
This link provides access to detailed documentation, example code, and community support to assist you in your development projects.
