Manual Pengguna Suis Lampu Tanpa Wayar dan Pengawal Beban SENSORWORX SWX-851-WH

1. Pengenalan

This manual provides instructions for the installation, operation, and maintenance of the SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller. This device is designed for seamless integration into lighting systems, offering wireless control for both residential and commercial applications. It operates on 120-277VAC line voltage and supports various load types.

Figure 1: SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller with its packaging.

2. Maklumat Keselamatan

• AMARAN: Risk of electric shock. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.
• Disconnect power at the circuit breaker or fuse before installing or servicing the device.
• Jangan gunakan peranti ini dengan muatan yang melebihi kadar yang ditetapkan.
• Pastikan semua sambungan wayar selamat dan terlindung dengan betul.
• Peranti ini bertujuan untuk kegunaan dalaman sahaja.
• The device meets regulatory guidelines for current leakage, ensuring safe operation.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Wireless Wall Switch and Load Controller (SWX-851-WH)
• Dawai Lead
• Skru Pemasangan
• Kacang Kawat
• Arahan (manual ini)

4. Persediaan dan Pemasangan

4.1 Arahan Pendawaian

The SWX-851-WH supports both 2-wire and 3-wire installations and does not require a neutral connection or a minimum load. It is compatible with 120-277VAC line voltage sistem.

• Sebelum Anda Bermula: Matikan kuasa pada pemutus litar.
• Identify the LINE (hot) and LOAD wires in the wall box.
• Connect the wires from the SWX-851-WH to the corresponding wires in the wall box using the provided wire nuts:
  • Kawat Hitam: Connect to LINE (hot) wire.
  • Kawat Biru: Connect to LOAD wire.
  • Kawat Hijau: Connect to GROUND wire.
  • White (or Yellow/Green) Wire: This is the NEUTRAL connection. If a neutral connection is available and desired, connect it. If no neutral is present or required, cap this wire off.
• Pastikan semua sambungan selamat.

Rajah 2: Belakang view of the SWX-851-WH, illustrating wiring connections. Black for Line, Blue for Load, Green for Ground, and White/Yellow/Green for Neutral (optional).

4.2 Pemasangan Fizikal

• Carefully push the wired controller into the wall box. The compact design allows for easier installation in crowded boxes.
• Secure the controller to the wall box using the provided mounting screws.
• Install the wall plate (not included) over the controller.
• Pulihkan kuasa pada pemutus litar.

4.3 Berpasangan Tanpa Wayar

The SWX-851-WH can be paired with up to 30 wireless sensors and remote wall stations for automatic lighting control. Refer to the specific instructions for your SENSORWORX wireless sensors or remote wall stations for pairing procedures. Typically, pairing involves a sequence of button presses on both devices.

For detailed instructions, you may scan the QR code on the back of the device or visit the SENSORWORX website. A direct link to the instructions is available di sini.

5. Operasi

5.1 Kawalan Hidup/Mati Asas

The primary function of the SWX-851-WH is to control connected lighting loads. Press the button on the switch to toggle the connected lights ON or OFF.

Rajah 3: Depan view of the SWX-851-WH, showing the control button.

5.2 Konfigurasi Lanjutan

The SWX-851-WH offers configurable settings for time delays, operational modes (occupancy, vacancy, switch disable), and photocell settings. These adjustments can be made without removing the cover plate, typically through specific button press sequences or via a paired sensor/programmer.

• Mod Penghunian: Lights turn ON automatically when occupancy is detected and OFF after a set time delay when the space is vacant.
• Mod Kekosongan: Lights must be turned ON manually but turn OFF automatically after a set time delay when the space is vacant.
• Switch Disable Mode: Disables the local switch button, allowing control only via paired wireless devices.
• Tetapan Photocell: Adjusts light level thresholds for automatic control based on ambient light.

Consult the full product documentation or the SENSORWORX website for detailed instructions on accessing and modifying these advanced settings.

6. Penyelenggaraan

• Pembersihan: To clean the device, wipe with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang melelas. Pastikan kuasa dimatikan sebelum membersihkan.
• Pemeriksaan: Periodically inspect the device for any signs of damage or loose connections. If damage is found, disconnect power and contact a qualified electrician.
• Tiada bahagian yang boleh diservis pengguna berada di dalam.

7. Penyelesaian masalah

If the problem persists after attempting these solutions, contact SENSORWORX customer support or a qualified electrician.

8. Spesifikasi

9. Waranti dan Sokongan

9.1 Waranti Produk

The SENSORWORX SWX-851-WH Wireless Light Switch and Load Controller comes with a Waranti 5 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims, please retain your proof of purchase.

9.2 Sokongan Pelanggan

For technical assistance, troubleshooting, or warranty inquiries, please contact SENSORWORX customer support. Visit the official SENSORWORX webtapak untuk maklumat hubungan dan sumber tambahan.

Webtapak: www.sensorworx.com