Zyerch SAT20 PRO Robotic Pool Cleaner Instruction Manual

1. Pengenalan

Welcome to the Zyerch SAT20 PRO Robotic Pool Cleaner manual. This document provides essential information for the safe and efficient operation and maintenance of your new pool cleaner. Please read this manual thoroughly before initial use and keep it for future reference.

2. Maklumat Keselamatan Penting

• Baca semua arahan dengan teliti sebelum mengendalikan perkakas.
• Jangan mengendalikan pembersih apabila orang atau haiwan berada di dalam kolam.
• Pastikan bekalan kuasa diputuskan sambungannya sebelum melakukan sebarang penyelenggaraan atau pembersihan.
• Gunakan hanya pengecas yang disediakan oleh pengilang.
• Jauhkan pembersih daripada kanak-kanak.
• Do not use the cleaner if the water temperature is outside the recommended range (e.g., too cold or too hot).

3. Kandungan Pakej

The following items are included with your Zyerch SAT20 PRO Robotic Pool Cleaner:

• 1x Robotic Pool Cleaner Device
• 1x Hook (for retrieval)
• 1x Manual Pengguna (dokumen ini)
• 1x Pengecas
• 1x Filter Basket

This image displays all components included in the package: the main robotic cleaner unit, a hook for easy retrieval, the user manual, the charging adapter, and the removable filter basket.

4. Persediaan

Persediaan dan Pengecasan Awal

1. Membongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
2. Caj Permulaan: Before first use, fully charge the robotic pool cleaner. Connect the charger to the charging port on the device and plug it into a standard 110V AC outlet. The battery supports up to 180 minutes of continuous cleaning and recharges in approximately 3-4 hours.

The robotic cleaner is shown connected to its power adapter for charging. A visual indicator highlights the approximate 4-hour charging duration required for a full battery.

3. Pemasangan Penapis: Ensure the 3L top-load filter basket is correctly installed inside the cleaner.

This image demonstrates the easy installation of the 3-liter top-load filter basket into the robotic pool cleaner. The basket is designed to collect debris during operation.

5. Penempatan di Kolam Renang: Gently lower the cleaner into the pool. Ensure it sinks to the bottom before starting operation.

The robotic cleaner is being retrieved from the pool using a hook, illustrating its quick water release capability for easier handling and removal.

5. Arahan Operasi

The Zyerch SAT20 PRO offers versatile cleaning modes for optimal pool maintenance.

1. Hidupkan kuasa: Press and hold the power button for 3 seconds until you hear a prompt sound.
2. Pilih Mod Pembersihan: Use the mode selection button to choose from the following options:
   • Dinding Sahaja: For cleaning pool walls and waterline.
   • Lantai Sahaja: For cleaning the pool floor.
   • Dinding & Lantai: For comprehensive cleaning of both walls and floor.

This diagram illustrates the robotic cleaner's intelligent navigation patterns: an "S" pattern for efficient floor-only cleaning and an "N" pattern for thorough wall-only cleaning, including the waterline.

3. Mula Membersihkan: Once the desired mode is selected, the cleaner will begin its cycle.
4. Matikan automatik: The cleaner will automatically shut off after completing its cleaning cycle or when the battery is low.
5. Pengambilan semula: Use the provided hook to safely retrieve the cleaner from the pool.

The robotic cleaner is shown actively moving across the bottom of a swimming pool, demonstrating its autonomous cleaning function.

Advanced Navigation & Traction

The cleaner utilizes a smart gyroscope-based navigation system, following an N-path along walls and an S-path on the pool floor for optimized route planning. Its four-wheel-drive (4WD) and PVC traction brushes adapt to various pool surfaces including tile, vinyl, pebble, glass, and mosaic. It can climb slopes up to 30°.

This image shows the robotic cleaner effectively climbing a sloped section of a pool, highlighting its advanced 4WD traction system and ability to navigate inclines.

Pembersihan Berprestasi Tinggi

Equipped with a 180W brushless motor, the cleaner provides 4800 GPH strong suction power, effectively removing debris such as sand, leaves, twigs, and pet hair.

This image illustrates the robotic cleaner's powerful suction, showing it effectively gathering various types of debris including sand, twigs, leaves, and pet hair from the pool bottom.

6. Penyelenggaraan

Pembersihan dan Penyimpanan

1. Emptying the Filter Basket: After each cleaning cycle, open the top cover and remove the filter basket. Dispose of collected debris.
2. Membersihkan Penapis: Rinse the filter basket thoroughly with a hose to remove fine particles. Ensure it is clean before re-inserting.

This image shows a user easily cleaning the removable filter basket of the robotic pool cleaner with a garden hose, emphasizing the simple maintenance process.

3. Storan: Simpan pembersih di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung apabila tidak digunakan.

7. Penyelesaian masalah

8. Spesifikasi Produk

9. Waranti & Sokongan

Maklumat Waranti

The Zyerch SAT20 PRO Robotic Pool Cleaner is backed by a Lifetime Full Replacement Warranty and Repair Assistance. For support, please contact Zyerch customer service at Zyerch2510@outlook.com.

This image highlights Zyerch's commitment to customer satisfaction, featuring their logo, the slogan "Your Trusted Partner," and details about their Lifetime Full Replacement Warranty and email support contact.

10. Video Produk