SKMEI Model 9333 Men's Analog Quartz Watch Instruction Manual

pengenalan

Thank you for choosing the SKMEI Model 9333 Analog Quartz Watch. This manual provides detailed instructions for setting up, operating, and maintaining your watch to ensure optimal performance and longevity. Please read this manual carefully before using your watch.

Produk Selesaiview

The SKMEI Model 9333 features a robust design with multiple functions. Familiarize yourself with the main components of your watch:

Imej: Berakhirview of the SKMEI Model 9333 watch components, including the case, dial, band, mirror, clasp, and back cover.

• Sarung Jam Tangan: Badan utama jam tangan, yang menempatkan mesin dan dail.
• Dail Tonton: The face of the watch displaying time and other functions.
• Jalur Jam Tangan: The strap that secures the watch to your wrist.
• Cermin Jam Tangan (Kristal): The transparent cover protecting the dial.
• Gesper Jam Tangan: The mechanism used to secure the watch band.
• Penutup Belakang: Bahagian belakang bekas jam tangan, selalunya mengandungi maklumat model dan kalis air.
• Mahkota: Typically located on the right side, used for setting time and date.
• Penolak: Buttons used to operate functions like stopwatch or LED light.

Arahan Persediaan

Menetapkan Masa

1. Tarik mahkota keluar ke kedudukan klik pertama.
2. Putar mahkota untuk melaraskan jarum jam dan minit ke masa yang dikehendaki.
3. Tolak mahkota kembali ke kedudukan normalnya untuk menghidupkan jam tangan.

Setting the Date and Day of the Week

1. Tarik mahkota keluar ke kedudukan klik kedua.
2. Rotate the crown clockwise or counter-clockwise to set the correct date and day.
3. Once set, push the crown back into its normal position.
4. Nota: Elakkan daripada menetapkan tarikh antara 9 malam dan 3 PG, kerana ini mungkin mengganggu mekanisme perubahan tarikh automatik.

Arahan Operasi

Menggunakan Fungsi Jam randik

The watch is equipped with a stopwatch for measuring elapsed time.

1. Press the upper pusher to start the stopwatch.
2. Press the upper pusher again to pause the stopwatch.
3. Press the lower pusher to reset the stopwatch to zero.

Fungsi Penggera

Refer to the specific instructions for setting the alarm, usually involving a dedicated pusher or crown position. (Nota: Detailed alarm setting steps are not provided in the product description, general guidance is given.)

Lampu LED

To illuminate the dial in low-light conditions, press the designated light button (usually a pusher on the side of the case). The light will typically stay on for a few seconds.

Format 12/24 Jam

The watch supports both 12-hour and 24-hour time display. The sub-dial for 24-hour format will indicate the current hour in a 24-hour cycle. This is typically synchronized with the main time setting.

Garis Panduan Ketahanan Air

Your SKMEI Model 9333 watch is rated for 30 meters (3 ATM/BAR) water resistance. This means it is suitable for daily use and can withstand splashes, rain, and brief immersion in water, such as hand washing.

Imej: The SKMEI watch shown with water splashes, indicating its water-resistant capabilities for daily activities.

Langkah berjaga-jaga penting:

• JANGAN operate the crown or pushers when the watch is wet or submerged in water.
• JANGAN use the watch for swimming, diving, snorkeling, or any water sports.
• Elakkan mendedahkan jam tangan kepada air panas, wap atau perubahan suhu yang melampau, kerana ini boleh menjejaskan pengedap air.
• If the watch is exposed to saltwater, rinse it gently with fresh water and dry it thoroughly.

Penjagaan dan Penyelenggaraan

• Pembersihan: Wipe the watch case and band regularly with a soft, dry cloth to remove dirt and moisture. For stainless steel bands, a slightly damp kain boleh digunakan, diikuti dengan pengeringan segera.
• Elakkan Bahan Kimia: Jangan dedahkan jam tangan kepada pelarut, detergen, pewangi atau kosmetik, kerana ini boleh merosakkan bekas, jalur atau pengedap.
• Suhu: Elakkan suhu yang melampau, baik panas mahupun sejuk, kerana ia boleh menjejaskan ketepatan jam tangan dan hayat bateri.
• Medan Magnet: Keep the watch away from strong magnetic fields (e.g., speakers, refrigerators, mobile phones) to prevent interference with the quartz movement.
• Penggantian Bateri: When the watch stops or the LED light dims significantly, it's time to replace the battery. It is recommended to have this done by a qualified watch technician to ensure proper sealing and water resistance. The battery type is SR920SW.

Imej: The back cover of the SKMEI watch, displaying the model number (9333) and water resistance rating (WR30M), along with battery type (SR920SW).

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

SKMEI watches are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official SKMEI website. If you encounter any issues or require technical assistance, please contact SKMEI customer support through their official channels or the retailer where the watch was purchased.

Sokongan dalam talian: Lawati Kedai SKMEI di Amazon