pengenalan
This manual provides essential instructions for the safe and proper use, installation, and maintenance of your Evenflo LiteMax 30 Infant Car Seat. Please read all instructions carefully before using the product and retain this manual for future reference. The Evenflo LiteMax 30 Infant Car Seat is designed for infants weighing 3 to 30 lbs and meets or exceeds all applicable federal safety standards.
Ciri-ciri Produk
- Julat Berat: Accommodates infants from 3 to 30 lbs.
- Harness Positions: Features 4 shoulder harness positions to adapt as your child grows.
- Reka bentuk ringan: Engineered for easy portability and maneuverability.
- Pemegang ergonomik: Designed for comfortable carrying.
- Full Coverage Canopy: Provides protection from sun, wind, and rain.
- Easy-to-Install Base: Equipped with a vehicle belt lock-off for secure installation.
- Standard Keselamatan: Meets or exceeds all applicable Federal Safety Standards, including structural integrity, rollover performance, and temperature testing.
Figure 1: Evenflo LiteMax 30 Infant Car Seat with its base.
Persediaan dan Pemasangan
Car Seat Base Installation
- Letakkan tapak tempat duduk kereta pada tempat duduk kenderaan dalam kedudukan menghadap belakang.
- Halakan pusingan dan tali pinggang bahu kenderaan melalui laluan tali pinggang yang ditetapkan di pangkalan.
- Engage the vehicle belt lock-off mechanism to secure the base tightly.
- Verify the recline angle using the recline indicator on the base. The indicator should be within the green zone for the child's weight.
- Attach the infant car seat to the installed base, ensuring it clicks securely into place.
Car Seat Installation Without Base (Vehicle Belt Only)
The Evenflo LiteMax 30 can be installed without its base, using only the vehicle's seat belt. This is useful for travel or when transferring the car seat to another vehicle without a base.
- Place the infant car seat on the vehicle seat in the rear-facing position.
- Route the vehicle's lap and shoulder belt through the designated belt guides on the car seat shell.
- Buckle the vehicle seat belt and pull it tight to remove all slack.
- Ensure the car seat is securely installed and does not move more than one inch side-to-side or front-to-back at the belt path.
Figure 2: Key features including harness adjustment and recline indicator.
Arahan Operasi
Menjaga Anak Anda
- Letakkan anak anda di tempat duduk kereta dengan belakangnya rata pada bahagian belakang tempat duduk.
- Bawa tali abah-abah ke atas bahu anak anda dan di antara kaki mereka.
- Connect the two harness buckle tongues into the buckle.
- Pull the harness adjustment strap to tighten the harness until it is snug against your child's body. Ensure you cannot pinch any slack at the shoulder.
- Letakkan klip dada pada paras ketiak.
Pelarasan Harness
The harness features 4 shoulder height positions. To adjust the harness height:
- Unbuckle the harness and remove the car seat from the base (if applicable).
- Locate the harness slots on the back of the car seat.
- Thread the harness straps through the appropriate slots so they are at or just below your child's shoulders when rear-facing.
- Re-thread the harness straps through the front of the seat and re-buckle.
Penggunaan Kanopi
The full-coverage canopy can be extended or retracted to shield your child from environmental elements. Simply pull the canopy forward or push it back as needed.
Figure 3: The car seat's full-coverage canopy provides shade and protection.
Penyelenggaraan dan Pembersihan
Regular cleaning and maintenance ensure the longevity and safety of your car seat.
Membersihkan Fabrik
- All fabric components are removable and machine washable.
- Refer to the care label on the fabric for specific washing instructions. Typically, machine wash cold on a delicate cycle and tumble dry low.
- Jangan gunakan peluntur atau detergen yang keras.
Cleaning the Harness and Buckle
- Lap tali abah-abah dengan iklanamp kain. Jangan basuh mesin atau rendam tali abah-abah dalam air, kerana ini boleh melemahkan webbing.
- Clean the buckle by rinsing it under warm water. Do not use soaps or lubricants.
Cleaning the Shell and Base
- Lap bahagian plastik dan logam dengan kain lembut,amp kain dan sabun lembut.
- Allow all parts to air dry completely before reassembly or use.
Figure 4: The car seat's fabric is designed for easy removal and machine washing.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tempat duduk kereta terasa longgar selepas dipasang. | Vehicle belt not tight enough or lock-off not engaged. | Re-install the car seat, ensuring the vehicle belt is pulled taut and the lock-off (if using the base) is fully engaged. Check for movement at the belt path. |
| Tali abah sukar dilaraskan. | Harness may be twisted or adjustment mechanism is stiff. | Ensure harness straps are not twisted. Check the harness adjustment mechanism for any obstructions. Refer to the "Harness Adjustment" section. |
| Recline indicator is not in the green zone. | Incorrect recline angle for child's weight. | Adjust the recline angle of the base or car seat until the indicator shows green for your child's weight range. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | CS100112404 |
| Dimensi Produk | 28.5 x 19 x 24 inci (L x P x H) |
| Berat Barang | 8.17 paun |
| Cadangan Berat Maksimum | 30 paun |
| Jenis Bahan | 100% Poliester |
| Bilangan Kedudukan Baring | 4 |
| Orientasi | Menghadap Belakang |
| Jenis Abah-abah | 5-Mata |
| Jenis Pemasangan | Seat With Base (or vehicle belt only) |
| warna | Knoxville Gray |
Figure 5: Product dimensions of the Evenflo LiteMax 30 Infant Car Seat.
Waranti dan Sokongan
For warranty information, please refer to the documentation included with your product or visit the official Evenflo website. Evenflo offers customer support through their ParentLink Consumer Care Team, which can provide real-time assistance, including live video support with a certified car seat safety technician for proper vehicle installation.
Untuk bantuan lanjut, sila layari Kedai Evenflo di Amazon atau pegawai mereka webtapak.