AUTOPHIX 7150P+ OBD2 Scanner Instruction Manual

1. Pengenalan

The AUTOPHIX 7150P+ is a professional OBD2 diagnostic scanner designed for Ford, Lincoln, and Mercury vehicles manufactured from 1996 onwards. This tool provides comprehensive system diagnostics and a wide range of maintenance reset functions. It also serves as a universal OBD2 code reader for all 12V vehicles equipped with a 16-pin port, enabling users to read and clear diagnostic trouble codes, view live data, and perform smog test readiness checks.

2. Apa yang ada di dalam Kotak

• AUTOPHIX 7150P+ OBD2 Scanner
• Kabel USB
• Manual Pengguna

3. Ciri-ciri Produk

3.1 Broad Vehicle Compatibility

The AUTOPHIX 7150P+ scanner is compatible with Ford, Lincoln, and Mercury vehicles from 1996 and newer. This includes models such as F150, F250, Edge, Escape, Expedition, Explorer, Ranger, Bronco, Fusion, Focus, Fiesta, MKC, and MKZ. It performs a full, in-depth scan of every system in these vehicles to identify and diagnose issues.

3.2 Advanced Maintenance Functions

This tool offers various service features for vehicle maintenance. These include:

• Tetapan Semula Sistem Pengurusan Bateri (BMS)
• Electronic Parking Brake (EPB) Maintenance Mode
• Pendarahan Sistem Brek Anti-kunci (ABS)
• Penjanaan Semula Penapis Zarah Diesel (DPF).
• Transmisi Belajar Semula
• Penentukuran Steering Angle Sensor (SAS).
• Set Semula Minyak
• Tetapan Semula Sistem Pemantauan Tekanan Tayar (TPMS)
• Electronic Throttle Control (ETC) Reset

3.3 Comprehensive System Diagnostics

The scanner performs a complete scan of all major vehicle systems, including Engine, Transmission, ABS, Airbag (SRS), TPMS, 4WD, and Steering. This helps in locating faults and maintaining vehicle performance.

3.4 Universal OBD2 Functionality

The device functions as a universal OBD2 diagnostic tool for all 12V vehicles with a 16-pin port. It can identify the cause of a check engine light, assist with smog tests, monitor live performance data, test battery voltage, and display detailed vehicle information.

4. Perlindungan Kenderaan

The AUTOPHIX 7150P+ is specifically designed for Ford, Lincoln, and Mercury vehicles. Below are examples of supported models:

Note: Vehicle compatibility can vary by specific model year and region. For detailed compatibility, please refer to the official AUTOPHIX website or contact support with your vehicle's make, model, and year.

This image illustrates the primary vehicle brands supported by the AUTOPHIX 7150P+ scanner: Ford, Lincoln, and Mercury.

5. Persediaan

Follow these steps to set up and begin using your AUTOPHIX 7150P+ OBD2 Scanner:

1. Connect to the Car: Locate your vehicle's OBD2 16-pin diagnostic port, typically found under the dashboard on the driver's side. Plug the scanner's cable firmly into this port. The scanner is plug-and-play and does not require a separate battery.
2. Turn on the Ignition: Turn your vehicle's ignition to the 'ON' position. Do not start the engine unless instructed by a specific diagnostic procedure.
3. Power On and Initialize: The scanner will power on automatically once connected to the vehicle's OBD2 port and the ignition is on. It will then perform an initial system check.

This diagram illustrates the three basic steps for connecting and preparing the scanner for use: plugging into the OBD2 port, turning on the ignition, and initiating diagnosis.

6. Arahan Operasi

Once the scanner is set up, navigate the menu using the directional buttons and the 'OK' (Enter) and 'ESC' (Back) buttons.

6.1 Navigasi Menu Utama

The main menu provides access to various functions. Use the UP/DOWN arrows to scroll through options and 'OK' to select. 'ESC' returns to the previous screen.

6.2 Membaca dan Membersihkan Kod Masalah Diagnostik (DTC)

1. Daripada menu utama, pilih 'Diagnosis' or 'Read Codes'.
2. Choose the specific Electronic Control Unit (ECU) you wish to scan (e.g., Engine, ABS, SRS).
3. The scanner will display any active or pending DTCs. Note down the codes and their descriptions.
4. After addressing the underlying vehicle issue, return to the diagnostic menu and select 'Erase Codes' to clear the DTCs and turn off the check engine light.

This image illustrates the process of diagnosing and clearing a check engine light, showing the light illuminated and then off.

6.3 Viewdalam Data Langsung

The 'Data Stream' function allows you to view real-time sensor data from your vehicle's systems. This can be crucial for diagnosing intermittent issues or verifying repairs.

1. Pilih 'Strim Data' daripada menu diagnostik.
2. Choose the parameters you wish to monitor (e.g., engine RPM, coolant temperature, oxygen sensor readings).
3. The data will be displayed in numerical or graphical format.

6.4 I/M Readiness (Smog Test)

This function checks the status of the vehicle's emission-related monitoring systems to determine if it's ready for an inspection/maintenance (smog) test.

1. Pilih 'Kesediaan Saya' daripada menu utama.
2. The scanner will display the status of various monitors (e.g., O2 Sensor Monitor, Catalyst Monitor). 'OK' or 'Complete' indicates the monitor has run and passed. 'INC' or 'Not Complete' means the monitor has not yet run.

This image depicts a vehicle being tested for emissions, illustrating the concept of passing or failing a smog test.

7. Maintenance Functions (Service Resets)

The AUTOPHIX 7150P+ offers several specialized maintenance functions. Access these through the 'Service' or 'Special Functions' menu on the device. The availability of specific functions may vary by vehicle model and year.

This image highlights the range of maintenance services, both common and special, that the AUTOPHIX 7150P+ can perform.

7.1 Set Semula Minyak

Resets the oil life reminder or oil change maintenance light in your vehicle after an oil service.

This image visually represents the Electronic Parking Brake (EPB) Reset and Oil Reset functions.

7.2 EPB Reset (Electronic Parking Brake)

Used to recalibrate the EPB system to its default settings after maintenance or repairs involving brake pads or calipers.

7.3 BMS Reset (Battery Management System)

Initializes the new battery and uploads its data to the vehicle's control unit (ECU) after battery replacement.

This image illustrates the BMS Reset and ETC Reset functions, showing a brake system and a throttle body.

7.4 ETC Reset (Electronic Throttle Control)

Restores the electronic throttle control system to its initial default setting, which can resolve issues related to abnormal idle speed and unstable engine performance.

7.5 Reset PCM Learned Values

Resets the Powertrain Control Module (PCM) learned values, allowing the system to re-adapt to the vehicle's current state and address engine and transmission performance issues caused by learning value deviation.

This image depicts the Reset PCM Learned Values and Throttle Learning functions, showing an engine diagram and a throttle body.

7.6 ABS Service Bleed

Expels air from the braking system to ensure brake fluid fills the entire system, maintaining normal braking performance.

This image illustrates the Clear Transmission Adaptive Tables and ABS Service Bleed functions, showing a transmission and a car battery.

7.7 Clear Transmission Adaptive Tables

Adjusts the transmission adaptive table based on driving habits and vehicle conditions. Clearing it enables the transmission to relearn, enhancing shift smoothness and response speed.

7.8 Fuel Injector Correction Factors

Adjusts the fuel injector's spray volume to ensure accurate fuel supply to the engine, optimizing performance and fuel economy.

This image depicts the Fuel Injector Correction Factors and Reset DPF Learned Values functions, showing engine injectors and a catalytic converter.

7.9 Reset DPF Learned Values (Diesel Particulate Filter)

For diesel vehicles, resetting DPF learned values allows the system to re-evaluate the DPF's status, addressing issues like DPF blockage and abnormal regeneration.

8. Kemas Kini Perisian

The AUTOPHIX 7150P+ scanner includes lifetime free software updates. These updates help maintain broad vehicle coverage and add new car models and functions.

8.1 Proses Kemas Kini

Untuk mengemas kini perisian:

1. Download the update tool from the official AUTOPHIX website onto a Windows PC.
2. Sambungkan pengimbas ke komputer anda menggunakan kabel USB yang disediakan.
3. Follow the instructions provided by the update tool to download and install the latest software.

Note: The USB cable is solely for connecting the device to a computer for software updates or printing diagnostic reports. Ensure your PC meets the system requirements for the update tool.

This image symbolizes the lifetime free software updates provided for the device, ensuring continued functionality and compatibility.

9. Spesifikasi

10. Penyelesaian masalah

If you encounter issues while using your AUTOPHIX 7150P+ scanner, consider the following:

10.1 Peranti Tidak Dihidupkan

• Ensure the scanner is firmly connected to the vehicle's OBD2 port.
• Pastikan penyalaan kenderaan berada dalam kedudukan 'ON'.
• Periksa volum bateri kenderaantage. The scanner draws power from the vehicle.

10.2 Ralat Komunikasi

• Confirm the vehicle is OBD2 compliant (generally 1996 and newer for US vehicles).
• Ensure the connection to the OBD2 port is secure.
• Try the scanner on a different compatible vehicle to rule out a vehicle-specific issue.

10.3 Isu Kemas Kini Perisian

• Ensure the USB cable is connected directly to a USB port on your computer, not through a USB hub.
• Verify that the update tool is running on a compatible Windows operating system.
• Temporarily disable any firewall or antivirus software that might interfere with the update process.
• If issues persist, contact AUTOPHIX technical support.

10.4 Specific Function Not Available

• Not all functions are available for all vehicle models or years, even within the supported brands.
• Ensure your scanner's software is up to date.
• Verify compatibility for your specific vehicle's make, model, and year with AUTOPHIX support.

11. Waranti dan Sokongan

The AUTOPHIX 7150P+ OBD2 Scanner comes with a Waranti pengilang 5 tahun. For technical assistance, warranty claims, or any product-related inquiries, please contact AUTOPHIX customer support.

Maklumat Hubungan:

• e-mel: autophix@163.com
• Amazon Message: Contact the seller directly through your Amazon order history.

Note: Fault codes can only be cleared after the vehicle issue is repaired. This scanner does not repair vehicle issues.