OREiN 1

OREiN 3000 Lumen Outdoor Motion Sensor Light

Model: 1 | Brand: OREiN

pengenalan

Thank you for choosing the OREiN Outdoor Motion Sensor Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and keep them for future reference.

This outdoor light features a high-efficiency 3000 lumen LED, a 180-degree adjustable motion sensor, and three selectable color temperatures (2700K, 4000K, 6500K). Its robust IP65-rated construction ensures reliable performance in various outdoor conditions.

Arahan Keselamatan

  • Always disconnect power at the circuit breaker before installation, maintenance, or cleaning.
  • Pemasangan hendaklah dilakukan oleh juruelektrik bertauliah atau orang yang biasa dengan pembinaan dan pengendalian produk serta bahaya yang terlibat.
  • Pastikan semua sambungan pendawaian selamat dan mematuhi kod elektrik tempatan.
  • Jangan melihat terus ke sumber cahaya LED apabila ia diterangi, kerana ini boleh menyebabkan kerosakan mata.
  • Jangan ubah suai lekapan atau gunakannya untuk tujuan selain daripada tujuan penggunaannya.
  • Jauhkan bahan pembungkusan daripada kanak-kanak.

Kandungan Pakej

Sila pastikan semua komponen ada dan tidak rosak:

  • OREiN Outdoor Motion Sensor Light Fixture
  • Pendakap Pemasangan
  • Skru Pemasangan dan Penambat Dinding
  • Manual Arahan

Spesifikasi

JenamaOREiN
Nombor Model1
Penggunaan Kuasa27 W
Fluks Bercahaya3000 lm
Suhu Warna2700K / 4000K / 6500K (Boleh Laras)
Kuantiti LED160 LED
Sudut Pengesanan Gerakan180 darjah
Jarak Pengesanan Pergerakan2 - 12 meter
Lighting Duration (TIME)30 saat - 8 minit
Light Sensitivity (LUX)20 - 2000 LUX
Penarafan IPIP65 (kalis air)
bahanAkrilonitril Butadiena Stirena (ABS)
Dimensi13 x 10 x 11 cm
Ketinggian Pemasangan yang Disyorkan1.8 - 2.5 meter
Jangka hayat50,000 jam
Voltage220 Volt

Persediaan dan Pemasangan

  1. Sediakan untuk Pemasangan: Pastikan bekalan kuasa ke kawasan pemasangan dimatikan pada pemutus litar.
  2. Tandakan Titik Penggerudian: Position the mounting bracket on the desired wall location. Use a pencil to mark the drilling points for the screws.
  3. Gerudi Lubang dan Masukkan Sauh: Drill holes at the marked points and insert the wall anchors (if necessary for your wall type).
  4. Lekapkan Pendakap: Pasangkan pendakap pelekap pada dinding menggunakan skru yang disediakan.
  5. Dawai Lekapan: Connect the electrical wires from your power supply to the fixture's terminals. Ensure correct connections for Live (L), Neutral (N), and Ground. The quick-connect technology allows for tool-free wiring.
  6. Pasang Lekapan Lampu: Align the light fixture with the mounted bracket and securely attach it. The optimized installation design allows for quick attachment.
  7. Pulihkan Kuasa: Setelah lekapan dipasang dan disambungkan dengan selamat, kembalikan kuasa pada pemutus litar.

Ketinggian Pemasangan yang Disyorkan: For optimal motion detection, install the light between 1.8 to 2.5 meters (5.9 to 8.2 feet) above the ground.

Image showing the OREiN outdoor light installed on a wall during a rainstorm, emphasizing its IP65 waterproof rating and robust construction.
The OREiN outdoor light features an IP65 waterproof rating, ensuring durability and reliable operation in various weather conditions, including rain, heat, and rust resistance.

Arahan Operasi

1. Adjustable PIR Sensor Settings

The motion sensor has three adjustable knobs on its underside to customize its behavior:

  • TIME (Lighting Time): Adjusts how long the light remains on after motion is detected. Range: 30 seconds to 8 minutes.
  • SENS (Detection Distance): Adjusts the sensitivity and range of the motion sensor. Range: 2 meters to 12 meters.
  • LUX (Sensitiviti Cahaya): Menentukan tahap cahaya ambien di mana sensor menjadi aktif.
    • 20 LUX (Min): The sensor will only activate in dark environments (nighttime).
    • 2000 LUX (Max): The sensor will activate in both daytime and nighttime conditions.
Close-up image of the OREiN outdoor light's adjustable knobs for TIME (lighting duration), SENS (detection distance), and LUX (light sensitivity).
This image shows the three adjustable knobs on the motion sensor: TIME (30 seconds to 8 minutes), SENS (2 to 12 meters detection distance), and LUX (20 LUX for night sensing only, 2000 LUX for all-day sensing). These allow customization of the light's behavior.

2. Pemilihan Suhu Warna (CCT)

The light offers three color temperature options. To switch between them, briefly click the CCT button (less than 0.5 seconds) located on the fixture:

  • 2700K: Warm White, ideal for cozy evenings on a terrace or patio.
  • 4000K: Neutral White, suitable for parking areas or bright work light.
  • 6500K: Cool White, provides active security lighting for garages and entrances.
Image showing the OREiN outdoor light switching between 2700K warm white, 4000K neutral white, and 6500K cool white light.
This image illustrates the three available color temperatures: 2700K for a warm ambiance, 4000K for a neutral light, and 6500K for a bright, cool light. The color temperature can be changed by clicking a button on the fixture.

3. Mod Pencahayaan

The fixture supports three operational modes. Double-click the CCT button to cycle through these modes:

  • Mode 1: Motion Mode (Security Mode)
    The light remains off until motion is detected. Upon detection, it illuminates at 100% brightness for the set TIME duration, then turns off.
  • Mode 2: D2D Mode (Dusk-to-Dawn Mode)
    At night, the light stays on continuously at 20% brightness. When motion is detected, it brightens to 100% for the set TIME duration, then returns to 20% brightness.
  • Mode 3: Manual Mode
    The light operates like a standard fixture, controlled by an external wall switch. The motion sensor is deactivated in this mode.
Image illustrating the three lighting modes of the OREiN outdoor light: Motion Mode (100% on/off), D2D Mode (20% night light, 100% on with motion), and Manual Mode (on/off via switch).
The light offers three operational modes, switchable by double-clicking: Motion Mode (activates 100% brightness upon motion, then turns off), D2D Mode (stays at 20% brightness at night, increases to 100% with motion, then returns to 20%), and Manual Mode (controlled by an external switch).
Image showing the OREiN outdoor light illuminating a wide area of 127 square meters, highlighting its 3000 lumen output and 27W power.
The OREiN outdoor light provides wide lighting coverage, illuminating up to 127 square meters with its 3000 lumens and 27W power, suitable for various outdoor spaces.
Image depicting the OREiN outdoor light's 180-degree motion detection range and up to 12-meter detection distance, with a car and people in the detection zone.
This image demonstrates the high sensitivity of the motion sensor, offering a 180-degree detection angle and a range of up to 12 meters. The recommended installation height is between 1.8 to 2.5 meters for optimal performance.

Penyelenggaraan

  • Pembersihan: To clean the fixture, ensure power is disconnected. Wipe with a soft, damp kain. Jangan gunakan pembersih yang kasar, pelarut atau bahan kimia yang keras, kerana ini boleh merosakkan kemasan atau komponen elektrik.
  • Pemeriksaan: Periodically inspect the fixture for any signs of damage, loose wiring, or wear. If any issues are found, disconnect power and consult a qualified electrician.
  • LED: The LEDs in this fixture are designed for a long lifespan (50,000 hours) and are not user-replaceable.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Cahaya tidak menyala.Tiada bekalan kuasa.
LUX setting too low (only activates at night).
Motion sensor obstructed or faulty.		Periksa pemutus litar dan pendawaian.
Adjust LUX knob to a higher setting (e.g., 2000 LUX for testing).
Pastikan garis penglihatan yang jelas untuk penderia.
Lampu kekal menyala secara berterusan.Gerakan berterusan dalam zon pengesanan.
Tetapan TIME terlalu lama.
Fixture is in D2D Mode or Manual Mode.		Clear the detection area of constant movement.
Adjust TIME knob to a shorter duration.
Double-click CCT button to switch to Motion Mode.
Penderia gerakan tidak mengesan.SENS setting too low.
Mounting height incorrect.
Obstructions blocking sensor.		Adjust SENS knob to a higher range.
Ensure mounting height is between 1.8-2.5m.
Remove any objects blocking the sensor's view.
Cahaya berkelip-kelip.Sambungan pendawaian longgar.
Bekalan kuasa tidak stabil.		Disconnect power and check all wiring connections.
Rujuk juruelektrik untuk memeriksa kestabilan bekalan kuasa.

Waranti dan Sokongan

This OREiN product comes with a Waranti 24 bulan dari tarikh pembelian, meliputi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.

For technical assistance, troubleshooting, or warranty claims, please contact our customer support team. We offer 7x24 hours support untuk memastikan kepuasan anda.

Sila simpan bukti pembelian anda untuk pengesahan waranti.

© 2025 OREiN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.