SSK SSK Dual Bay NVMe SSD Duplicator & M.2 NVMe/SATA Enclosure Bundle

SSK NVMe SSD Cloner & M.2 Enclosure User Manual

Model: SSK Dual Bay NVMe SSD Duplicator & M.2 NVMe/SATA Enclosure Bundle

1. Pengenalan

This user manual provides comprehensive instructions for the SSK NVMe SSD Cloner and M.2 Enclosure Bundle. This bundle includes a dual-bay NVMe SSD duplicator for offline cloning and PC connectivity, and a versatile M.2 NVMe/SATA SSD enclosure for external storage. Please read this manual carefully before using the devices to ensure proper operation and maximize performance.

2. Produk Lebihview

2.1 Komponen Termasuk

  • SSK Dual Bay NVMe SSD Cloner/Duplicator
  • SSK M.2 NVMe/SATA SSD Enclosure Adapter
  • USB-C to USB-C Cable (20Gbps)
  • USB-A to USB-C Cable (10Gbps)
  • 12V/2A Power Adapter (for Cloner)

2.2 Ciri-ciri Utama

  • Dual Bay NVMe SSD Cloner: Supports offline cloning of NVMe SSDs without a computer.
  • Pemindahan Data Berkelajuan Tinggi: Up to 20Gbps (USB 3.2 Gen 2x2) for the cloner, and up to 10Gbps (USB 3.2 Gen 2) for the single enclosure.
  • Reka Bentuk Bebas Alat: Easy installation and removal of M.2 SSDs.
  • Keserasian Luas: The single enclosure supports M.2 NVMe and SATA SSDs (B+M Key, M Key) in sizes 2242, 2260, and 2280. Note: The dual-bay cloner only supports NVMe SSDs.
  • Akses Serentak: The dual-bay cloner allows simultaneous read and write access to two NVMe SSDs when connected to a PC.
SSK Dual Bay NVMe SSD Cloner with two M.2 NVMe SSDs inserted

Figure 2.2.1: SSK Dual Bay NVMe SSD Cloner with SSDs.

This image displays the SSK dual-bay NVMe SSD cloner, designed for easy insertion of two M.2 NVMe SSDs for cloning or data access.

SSK M.2 NVMe/SATA SSD Enclosure Adapter with included cables

Figure 2.2.2: SSK M.2 NVMe/SATA SSD Enclosure Adapter.

This image shows the compact SSK M.2 NVMe/SATA SSD enclosure adapter, along with its USB-C to USB-C and USB-A to USB-C cables, providing versatile connectivity for external storage.

3. Panduan Persediaan

3.1 Dual Bay NVMe SSD Cloner Setup

  1. Sambungan Kuasa: Connect the provided 12V/2A power adapter to the DC IN port on the cloner and plug it into a power outlet.
  2. SSD Insertion:
    • For cloning: Insert the Source NVMe SSD into the "Source" slot and the Target NVMe SSD into the "Target" slot. Ensure SSDs are fully seated.
    • For PC connection: Insert one or two NVMe SSDs into the desired slots.
    Note: The cloner only supports NVMe M.2 SSDs. SATA M.2 SSDs are not compatible with this device.
  3. Sambungan PC (Pilihan): If using as an external enclosure, connect the cloner to your computer using the provided USB-C to USB-C (20Gbps) or USB-A to USB-C (10Gbps) cable.
SSK Dual Bay NVMe SSD Cloner connected to power adapter and two SSDs inserted

Figure 3.1.1: Cloner with power and SSDs.

This image illustrates the SSK dual-bay cloner connected to its power adapter, with two NVMe SSDs inserted, ready for operation.

3.2 M.2 NVMe/SATA SSD Enclosure Setup

  1. Kandang Terbuka: Slide open the enclosure cover.
  2. SSD Insertion: Carefully insert your M.2 NVMe or SATA SSD into the slot, ensuring it is fully seated. Secure it if necessary (tool-free design typically uses a rubber stopper).
  3. Tutup Kandang: Slide the cover back until it clicks into place.
  4. Sambungan PC: Connect the enclosure to your computer using either the USB-C to USB-C or USB-A to USB-C cable. No external power is required for this enclosure.
SSK M.2 NVMe/SATA SSD Enclosure used as external storage with a laptop

Figure 3.2.1: Single Enclosure as External Storage.

This image demonstrates the SSK M.2 NVMe/SATA SSD enclosure connected to a laptop, functioning as a portable external storage device.

Diagram showing M.2 NVMe and SATA key types and compatible SSD sizes for the single enclosure

Figure 3.2.2: Single Enclosure Compatibility.

This diagram illustrates the compatibility of the single M.2 enclosure with different M.2 key types (M Key, B+M Key) for both NVMe and SATA protocols, and supported SSD sizes (2242, 2260, 2280).

4. Arahan Operasi

4.1 Offline Cloning (Dual Bay Cloner)

Offline cloning allows you to duplicate an SSD without connecting to a computer. Ensure the target SSD has equal or greater capacity than the source SSD.

  1. Ensure the cloner is disconnected from any computer.
  2. Masukkan Source NVMe SSD into the "Source" slot and the Target NVMe SSD into the "Target" slot.
  3. Connect the 12V/2A power adapter to the cloner and plug it into a power outlet.
  4. Press and hold the "Clone" button for approximately 3-5 seconds until the progress indicator lights (25%, 50%, 75%, 100%) begin to flash.
  5. Release the button. Press the "Clone" button again briefly to confirm and start the cloning process.
  6. The progress indicator lights will illuminate sequentially (25%, 50%, 75%, 100%) to show the cloning progress.
  7. Once all four lights are solid, the cloning process is complete.
  8. Safely remove the SSDs after disconnecting power.
Important: All data on the Target SSD will be erased during the cloning process. Back up any important data on the Target SSD before proceeding.
Atas ke bawah view of SSK Dual Bay NVMe SSD Cloner showing Source and Target slots and clone button

Figure 4.1.1: Cloner Controls and Slots.

Imej ini menyediakan atas ke bawah view of the SSK dual-bay cloner, highlighting the "Source" and "Target" SSD slots, the clone button, and progress indicators.

4.2 Data Transfer (PC Mode - Dual Bay Cloner)

The dual-bay cloner can also function as a dual NVMe SSD enclosure when connected to a computer.

  1. Insert one or two NVMe SSDs into the cloner's slots.
  2. Connect the cloner to your computer using the appropriate USB cable (USB-C to USB-C for 20Gbps, USB-A to USB-C for 10Gbps).
  3. Ensure the 12V/2A power adapter is connected to the cloner and plugged into a power outlet.
  4. The SSD(s) will appear as removable drives on your computer. You can now read from or write to them.
Screenshot of a speed test showing 20Gbps transfer rates with the SSK cloner connected to a laptop

Figure 4.2.1: 20Gbps Speed Performance.

This image displays a benchmark test demonstrating the high-speed data transfer capabilities (up to 1800MB/s read/write) of the SSK cloner when utilizing the 20Gbps USB 3.2 Gen 2x2 port.

4.3 Using the M.2 NVMe/SATA SSD Enclosure

The single M.2 enclosure provides a portable solution for accessing M.2 NVMe or SATA SSDs.

  1. Ensure an M.2 SSD is properly installed inside the enclosure (refer to Section 3.2).
  2. Connect the enclosure to your computer using either the USB-C to USB-C or USB-A to USB-C cable.
  3. The SSD will appear as a removable drive on your computer. You can now use it for external storage, backup, or data transfer.
Screenshot of a speed test showing 10Gbps transfer rates with the SSK single enclosure connected to a laptop

Figure 4.3.1: 10Gbps Speed Performance.

This image shows a benchmark test illustrating the data transfer speeds (up to 10Gbps) achievable with the SSK single M.2 enclosure when connected via USB 3.2 Gen 2.

5. Penyelenggaraan

  • Pembersihan: Use a soft, dry cloth to clean the exterior of the devices. Avoid using liquid cleaners or solvents.
  • Storan: Simpan peranti di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.
  • Pengendalian: Handle the devices and SSDs with care to prevent physical damage. Avoid dropping or subjecting them to strong impacts.
  • Perisian tegar: Periodically check the SSK official website for any available firmware updates for optimal performance and compatibility.

6. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
Cloner not powering on / LEDs not lighting up.Penyesuai kuasa tidak disambungkan atau rosak.Ensure the 12V/2A power adapter is securely connected to the cloner and a working power outlet.
SSD not recognized by computer (Cloner or Enclosure).
  • SSD tidak dipasang dengan betul.
  • Incorrect SSD type (e.g., SATA in NVMe-only cloner).
  • Isu sambungan kabel.
  • SSD unformatted or uninitialized.
  • Re-insert the SSD firmly.
  • Verify SSD compatibility with the specific device (Cloner: NVMe only; Single Enclosure: NVMe & SATA).
  • Cuba port USB atau kabel lain.
  • Check Disk Management (Windows) or Disk Utility (macOS) to initialize/format the SSD if it's new.
Offline cloning fails or stops.
  • Target SSD capacity is smaller than Source SSD.
  • SSDs not properly inserted.
  • Gangguan kuasa.
  • Ensure Target SSD capacity is equal to or greater than Source SSD.
  • Re-insert both SSDs firmly.
  • Ensure stable power supply during cloning.
Kelajuan pemindahan perlahan.
  • Using a lower-speed USB port/cable.
  • Computer's USB controller limitations.
  • Ensure you are using a USB 3.2 Gen 2x2 port (20Gbps) for the cloner or USB 3.2 Gen 2 port (10Gbps) for the single enclosure on your computer.
  • Gunakan kabel berkelajuan tinggi yang disediakan.
  • Some Thunderbolt 3/USB4 ports may default to 10Gbps for non-Thunderbolt devices.

7. Spesifikasi

CiriPerincian
Max Number of Supported Devices (Cloner)2 (NVMe M.2 SSDs)
Data Transfer Rate (Cloner)Up to 20 Gigabits Per Second (USB 3.2 Gen 2x2)
Data Transfer Rate (Single Enclosure)Up to 10 Gigabits Per Second (USB 3.2 Gen 2)
Antara Muka PerkakasanUSB 3.2 Gen 2x2 (Cloner), USB 3.2 Gen 2 (Single Enclosure)
JenamaSSK
bahanPlastik, Logam
Compatible Devices (Cloner)NVMe M.2 SSDs (2242, 2260, 2280)
Compatible Devices (Single Enclosure)NVMe M.2 SSDs (M Key, B+M Key) and SATA M.2 SSDs (B+M Key) in sizes 2242, 2260, 2280
Power Supply (Cloner)Penyesuai DC 12V / 2A
Power Supply (Single Enclosure)Dikuasakan Bas USB

8. Waranti dan Sokongan

SSK products are designed for reliability and performance. For warranty information, technical support, or any inquiries regarding your SSK NVMe SSD Cloner and M.2 Enclosure Bundle, please visit the official SSK webtapak atau hubungi sokongan pelanggan mereka secara langsung. Simpan resit pembelian anda untuk tuntutan waranti.

Official SSK Store: SSK Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.