1. Pengenalan
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Mean Well EDR-120-24 AC/DC DIN Rail Power Supply. The EDR-120 series is an economical, slim 120W power supply designed for industrial applications. It is suitable for installation on TS-35/7.5 or TS-35/15 mounting rails, featuring a compact 40mm width for space-saving within cabinets. This unit operates effectively in ambient temperatures between -20℃ and 60℃ under air convection.
Please Note: The EDR series is primarily for industrial applications. For household applications, please choose the NDR series.
2. Maklumat Keselamatan
Baca semua arahan dengan teliti sebelum pemasangan dan pengendalian. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan serius.
- Kakitangan Berkelayakan: Pemasangan dan penyelenggaraan hendaklah hanya dilakukan oleh kakitangan yang berkelayakan.
- Pemutusan Kuasa: Always disconnect the main power supply before any installation, wiring, or maintenance work.
- Pembumian yang betul: Pastikan pembumian yang betul untuk mengelakkan kejutan elektrik.
- Pengudaraan: Maintain adequate ventilation around the unit. Do not obstruct ventilation openings.
- Keadaan Persekitaran: Operate the power supply within the specified temperature and humidity ranges. Avoid exposure to moisture or corrosive environments.
- Spesifikasi wayar: Use copper wire only, rated for a minimum of 75℃.
- Kegunaan Perindustrian: This product is designed for industrial control equipment.
3. Produk Lebihview dan Ciri
The EDR-120-24 is a robust AC/DC power supply offering reliable performance for various industrial needs. Key features include:
- Output: 24V, 5A, 120W.
- Input Voltage: 90 ~ 264VAC / 124 ~ 370VDC.
- Perlindungan: Short circuit, Overload, Over Voltage, Lebih Suhu.
- Kecekapan: High efficiency of 87.5% (typical).
- Pensijilan: UL and CE certified, UL 508 (Industrial Control Equipment) approved.
- Reka bentuk padat: Slim 40mm width for space-saving DIN rail mounting.
- penyejukan: Air convection cooling.
Rajah 1: Depan view of the Mean Well EDR-120-24 power supply, showing input/output terminals, voltage adjustment, and DC OK indicator.
4. Spesifikasi Mekanikal
The EDR-120-24 features a compact design suitable for DIN rail mounting. Detailed dimensions are provided below.
Figure 2: Mechanical drawing of the EDR-120-24, showing top, side, front, and bottom views with dimensions in millimeters (tolerance ±1mm).
Tugasan Pin Terminal
| Pin no. | Tugasan |
|---|---|
| 1 | FG (Tanah Bingkai) |
| 2 | AC/N or DC - |
| 3 | AC / L atau DC + |
| Pin no. | Tugasan |
|---|---|
| 1,2 | OUTPUT DC -V |
| 3,4 | DC OUTPUT +V |
5. Pemasangan (Persediaan)
Follow these steps for proper installation of the EDR-120-24 power supply.
5.1 Pemasangan
- The EDR-120-24 is designed for DIN rail mounting on TS-35/7.5 or TS-35/15 rails.
- Ensure sufficient clearance for air circulation. A minimum of 5mm left and right, 40mm above, and 20mm below the power supply is recommended for optimal cooling.
- To mount, hook the top edge of the power supply onto the DIN rail, then push the bottom edge firmly until it clicks into place.
Rajah 3: Sisi view illustrating the DIN rail mounting mechanism.
5.2 Pendawaian
All connections are made via screw terminal blocks. Refer to the Terminal Pin Assignment tables in Section 4.
- Input Wiring (TB1): Connect the AC mains (L, N) or DC input (+, -) to the corresponding terminals. Ensure the Frame Ground (FG) terminal is properly connected to earth ground. The input voltagjulat e ialah 90-264VAC atau 127-370VDC.
- Output Wiring (TB2): Connect your load to the DC OUTPUT +V and -V terminals.
- Jenis wayar: Use copper wire only, rated for a minimum of 75℃.
- Tork: Ensure terminal screws are tightened to the specified torque (Input: 6.5 Lb-in, Output: 5.5 Lb-in) to prevent loose connections.
Gambar 4: Cthample wiring diagrams for different input configurations. Always refer to the product label for specific terminal markings.
6. Operasi
Once installed and wired correctly, the EDR-120-24 is ready for operation.
- Hidupkan kuasa: Apply the specified AC or DC input voltage.
- DC OK Indicator: A green LED labeled "DC OK" will illuminate when the output voltage berada dalam julat yang boleh diterima.
- Keluaran Voltage Pelarasan: Keluaran voltage can be finely adjusted using the "+V ADJ" potentiometer located on the front panel. Use a small screwdriver to turn the potentiometer clockwise to increase voltage or counter-clockwise to decrease it.
7. Penyelenggaraan
The EDR-120-24 is designed for long-term reliability with minimal maintenance. However, periodic checks are recommended.
- Pembersihan: Keep the unit clean and free from dust and debris, especially around ventilation openings, to ensure proper air convection cooling. Use a soft, dry cloth for cleaning.
- Pemeriksaan Sambungan: Periodically inspect all wiring connections for tightness and signs of corrosion. Re-tighten screws if necessary after disconnecting power.
- Pemantauan Alam Sekitar: Pastikan persekitaran operasi kekal dalam had suhu dan kelembapan yang ditetapkan.
8. Penyelesaian masalah
If the power supply is not functioning as expected, consider the following common issues:
- No Output / DC OK LED Off:
- Check input power connections and voltage.
- Verify that the input fuse (if external) is intact.
- Check for short circuits or overloads on the output. Disconnect the load and re-test.
- Ensure the ambient temperature is within the operating range.
- Operasi sekejap:
- Periksa sambungan pendawaian yang longgar.
- Verify that the load current does not exceed the rated output current (5A). Overload protection may be activating.
- Ensure adequate ventilation to prevent over-temperature shutdown.
- Voltan Output Salahtage:
- Adjust the "+V ADJ" potentiometer.
- Sahkan input voltage is stable and within the specified range.
If problems persist after checking these points, contact qualified service personnel or the manufacturer.
9. Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Nama Model | EDR-120-24 |
| Keluaran Voltage | 24V |
| Nilai Semasa | 5A |
| Kuasa Keluaran | 120W |
| Input Voltage Julat | 90 ~ 264VAC / 127 ~ 370VDC |
| Kekerapan Input | 47 hingga 63 Hz |
| Kecekapan (Jenis) | 87.5% |
| Riak & Bunyi (Maks.) | 120mVp-p |
| Peraturan Talian | 0.5% |
| Peraturan Beban | 1% |
| Minimum Isolation Voltage | 3000VAC |
| Perlindungan | Short circuit, Overload, Over Voltage, Suhu Lebih |
| Suhu Operasi | -20 ℃ hingga 60 ℃ |
| Kaedah Penyejukan | Air Convection |
| Dimensi (L x W x H) | 113.5 x 40 x 125.2 mm (4.47 x 1.57 x 4.93 inci) |
| Melekap | Rel DIN |
| Berat badan | 600g |
| Pensijilan | UL, CE, EU RoHS Compliant |
10. Waranti dan Sokongan
This Mean Well power supply is manufactured to high-quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your distributor. For technical support or service inquiries, please reach out to the seller or the official Mean Well support channels.
Manufacturer: MEAN WELL ENTERPRISES CO., LTD.
Distributed by: KAINSC PRODUCTS KAWAGUCH INDUSTRIAL SCIENTIFIC
