Produk Selesaiview
The BITIWEND Blink Video Doorbell Chime Extender Kit is designed to amplify the chime signal of your Blink 1st and 2nd Generation video doorbells. This kit ensures you receive timely alerts throughout your home, providing both audible and visual notifications. It is specifically for wired Blink doorbells and is not compatible with doorbells powered by external power supplies or those already connected to an existing chime system.
Figure 1: Comparison of doorbell notification with and without the chime extender.
Kandungan Pakej
Sila sahkan bahawa semua komponen terdapat dalam pakej anda:
- 1x Chime Transmitter
- 1x Chime Receiver
- Skru Pemasangan
- Manual Pengguna
Figure 2: Included components of the BITIWEND Chime Extender Kit.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | B23A |
| Sumber Kuasa | Wired Electric (Transmitter), Wall Outlet (Receiver) |
| Julat Maksimum | 200 meter (ruang terbuka) |
| melodi | 32 pilihan |
| Tahap Kelantangan | 5 (0-110 dB) |
| Jenis Pemasangan | Lekap di dinding |
| Dimensi Produk | 8.2 x 2 x 8 cm (Transmitter); 7.5 x 7.5 cm (Receiver) |
| Berat Barang | 150 gram |
Persediaan dan Pemasangan
Follow these steps for a quick and easy installation:
- Prepare the Transmitter:
Carefully lift the cover of the transmitter unit. Remove the insulating sheet from the battery compartment. Connect the two wires from your Blink Video Doorbell to the terminals on the back of the transmitter. Polarity is irrelevant for this connection. Ensure the wires are securely fastened.
Figure 3: Wiring the transmitter to the Blink Video Doorbell.
- Mount the Transmitter:
Attach the transmitter to the wall, either above or below your Blink Video Doorbell. Use the provided mounting screws to secure it. Ensure the connection is stable.
Figure 4: Transmitter attached to the Blink Video Doorbell.
- Pasangkan Penerima:
Plug the chime receiver into any standard wall outlet within range of your doorbell. The receiver will light up, indicating it is powered on.
Figure 5: Chime receiver ready for operation.
- Activate via Blink App:
Open the Blink app on your smartphone. Navigate to the doorbell settings and follow the on-screen instructions to activate the chime extender. Ensure your phone is connected to a 2.4 GHz Wi-Fi network for proper app activation.
Video 1: Step-by-step guide to activating the chime extender through the Blink app.
Nota Keserasian Penting: This product is not compatible if your Blink doorbell is already connected to an existing chime system or if it is powered by an external power supply instead of its internal battery. The extender is designed for wired doorbell setups only.
Arahan Operasi
Customizing Melodies and Volume
The chime extender offers 32 different melodies and 5 adjustable volume levels (0-110 dB). To change the melody or volume, refer to the specific instructions in the included manual or the Blink app settings after activation.
Figure 6: Customizable sound and volume settings.
Liputan Isyarat
The transmission device provides a signal range of up to 200 meters in open spaces. This allows for extended coverage throughout your home, including areas like the garden, garage, or attic.
Figure 7: Illustrates the extensive signal range of the chime extender.
Penyelenggaraan
The BITIWEND Chime Extender Kit requires minimal maintenance. Keep the units clean by wiping them with a dry, soft cloth. Avoid using abrasive cleaners or solvents. Ensure the receiver is plugged into a stable power source and the transmitter's battery is functional.
Menyelesaikan masalah
- Tiada Bunyi dari Penerima:
Ensure the receiver is properly plugged into a working wall outlet. Check the volume settings on the receiver and in the Blink app. If the issue persists, try resetting the system as described below.
- Isyarat Sekejap-sekejap:
The signal range can be affected by thick walls, metal objects, or other radio devices. Try repositioning the receiver closer to the doorbell or in a more open area. Ensure there are no large obstructions between the transmitter and receiver.
- Resetting and Re-pairing:
If you experience connection issues, try resetting the system and re-pairing the units:
- On the receiver, press and hold the "up" or "down" button until you hear a sound.
- Press and hold the volume button until you hear a tone.
- Within 5 seconds, activate your Blink doorbell to correctly pair the system.
- Blink Doorbell Not Activating Chime Extender:
Verify that your Blink doorbell is a 1st or 2nd generation model and is configured for wired operation. Ensure the wiring connections to the transmitter are secure. Confirm that the Blink app settings are correctly configured for the chime extender.
Waranti dan Sokongan
For warranty information and technical support, please refer to the contact details provided in the original product packaging or visit the official BITIWEND webtapak. Simpan resit pembelian anda untuk tuntutan waranti.