1. Pengenalan dan Lebihview
The ESX QUANTUM QS-FOUR is an ultra-compact 4-channel Class D amplifier designed to significantly upgrade your car audio system. This powerful yet miniature 4-channel version measures only 90 x 35 x 80 mm, making it one of the smallest amplifiers in its class. It delivers an impressive 4 x 60 Watts RMS, providing substantial power to factory or aftermarket speakers.
The QS-FOUR features exceptionally low distortion (THD+N < 0.007% at 5W/RMS) and high efficiency (up to 90%), ensuring clear and dynamic sound reproduction. Its compact size allows for flexible installation, often directly behind the dashboard, making it an ideal plug-and-play solution for vehicles. The amplifier's low current draw (5-10 Amps) means it can often utilize existing factory power cables. Additionally, the QS-FOUR includes low-level outputs for connecting active subwoofers or larger monoblock amplifiers, offering expandability for enhanced bass.
2. Maklumat Keselamatan
- Always disconnect the vehicle's battery before beginning any installation work to prevent electrical shorts and damage.
- Professional installation is recommended. Incorrect wiring can cause serious damage to the amppengangkut, kenderaan atau kecederaan diri.
- Ensure all wiring is properly insulated and secured to prevent short circuits and vibrations.
- Jangan pasang amplifier in locations exposed to moisture, excessive heat, or direct sunlight.
- Use appropriate gauge wiring for power and speaker connections as specified in the installation section.
- Protect all power cables with an inline fuse located close to the battery.
- Elakkan daripada meletakkan amplifier where it could obstruct vehicle controls or safety devices.
3. Kandungan Pakej
Sila semak kandungan pakej untuk memastikan semua item ada dan tidak rosak:
- ESX QUANTUM QS-FOUR AmpUnit penguat
- High-Level Input Wiring Harness with EPS (Error Protection System)
- Power Input Wiring Harness
- Speaker Output Wiring Harness
- RCA Line-Out Cables
- Inline Fuse Holder with Fuse
- Skru Pemasangan
4. Ciri-ciri Produk
- Reka Bentuk Ultra-Kompak: Dimensions of 90 x 35 x 80 mm for flexible installation.
- Output Kuasa Tinggi: 4 x 60 W RMS at 2 Ω, 4 x 45 W RMS at 3 Ω, 4 x 35 W RMS at 4 Ω, or 2 x 120 W RMS bridged at 4 Ω.
- Full Range Class D Technology: Efficient power delivery with minimal heat generation.
- Selectable Crossover Filters: Front and Rear Highpass/Lowpass filters switchable at 80 Hz.
- High-Level Inputs with EPS: Error Protection System for seamless integration with factory head units.
- Auto-Turn-On Function: Automatic power-on via DC offset or VOX (signal detection).
- 2-Channel RCA Line-Out: For connecting external active subwoofers or additional amppenyelamat.
- 12V Remote Output: Provides a remote signal for other devices.
- Respons Frekuensi Luas: 10 Hz hingga 60 kHz.
- Low Total Harmonic Distortion (THD+N): < 0.007% at 5W/RMS.
- Kecekapan Tinggi: Up to 90% for reduced power consumption.
5. Persediaan dan Pemasangan
5.1 Sambungan Pendawaian
Before making any connections, ensure the vehicle's battery is disconnected. Refer to the diagrams below for proper wiring.
Input Kuasa:
- + 12V: Connect to the positive terminal of the car battery via an inline fuse (not included, but a fuse holder is provided).
- GND: Connect to a solid, unpainted metal point on the vehicle chassis. Ensure a good ground connection.
- REM (Jauh): Connect to the remote output of your head unit. If using high-level inputs with Auto-Turn-On, this connection may not be necessary.
Output pembesar suara:
Connect your speakers to the designated terminals. Ensure correct polarity (positive to positive, negative to negative). The amplifier supports 4-channel stereo or 2-channel bridged operation.
- FL+/FL-: Speaker Kiri Depan
- FR+/FR-: Pembesar Suara Depan Kanan
- RL+/RL-: Speaker Kiri Belakang
- RR+/RR-: Pembesar Suara Belakang Kanan
- Mod Jambatan: For 2-channel operation, connect the positive of the left speaker to FL+ and the negative to FR-. For the right speaker, connect positive to RL+ and negative to RR-. Refer to the manual for specific bridging instructions.
Sambungan Input:
- Input Tahap Tinggi: Use the provided harness to connect to your head unit's speaker outputs. The EPS (Error Protection System) ensures compatibility with various factory systems.
- Talian Keluar RCA: Use the RCA cables to connect to an active subwoofer or another amplebih hidup.
5.2 Tetapan Awal
- Level Input (Gain): Start with the gain knobs set to minimum (MIN). Gradually increase the gain until the sound is clear and distortion-free at your desired listening volume. Avoid setting the gain too high, as this can introduce distortion.
- X-OVER (Crossover):
- PENUH: Full range audio (no filter).
- HP (Pas Tinggi): Allows frequencies above 80 Hz to pass, typically used for full-range speakers to remove bass.
- LP (Hantaran Rendah): Allows frequencies below 80 Hz to pass, typically used for subwoofers (though this amplifier is not primarily for subwoofers, it can be used for mid-bass applications).
- AUTO TURN-ON:
- MATI: Amplifier turns on via the REM wire.
- VOX: Amplifier turns on when an audio signal is detected (signal sensing).
- DC: Amplifier turns on when a DC offset is detected on the high-level inputs (common with factory head units).
6. Arahan Operasi
Once properly installed and configured, the ESX QUANTUM QS-FOUR amplifier operates automatically with your vehicle's audio system.
- Hidupkan/Mati Kuasa: The amplifier will power on and off with your head unit, depending on the selected AUTO TURN-ON mode (REM, VOX, or DC). The 'POWER' LED on the rear panel will illuminate when the ampliifier aktif.
- Main Balik Audio: Play audio through your head unit as usual. The amplifier will provide enhanced power and clarity to your speakers.
- Melaraskan Kelantangan: Control the overall system volume using your head unit. If distortion occurs at high volumes, slightly reduce the amptetapan gandaan lifier.
- Mod Perlindungan: If the 'PROTECT' LED illuminates, the amplifier has entered protection mode due to an issue (e.g., short circuit, overheating, low voltage). Turn off your audio system and vehicle, then troubleshoot the cause before restarting.
7. Penyelenggaraan
- Pembersihan: Gunakan kain lembut dan kering untuk membersihkannya ampbahagian luar penapis. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Sambungan: Periodically check all power, ground, and speaker connections to ensure they are secure and free from corrosion.
- Pengudaraan: Memastikan ampSirip penyejuk pemanas tidak terhalang untuk membolehkan pelesapan haba yang betul.
- Penggantian fius: If the inline fuse blows, replace it only with a fuse of the same type and rating to prevent damage.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada suara dari pembesar suara | Tiada kuasa untuk amplifier; Incorrect input/output wiring; Head unit not sending signal; Amppenguat dalam mod perlindungan. | Check power and ground connections; Verify remote turn-on signal; Check speaker and input wiring; Ensure head unit is on and playing audio; Check 'PROTECT' LED. |
| Bunyi herot | Gain set too high; Incorrect crossover settings; Speaker impedance mismatch; Damaged speakers. | Reduce gain level; Adjust crossover settings; Verify speaker impedance is within amplifier's range; Test speakers individually. |
| 'PROTECT' LED is on | Short circuit in speaker wiring; Overheating; Low/high voltage; Speaker impedance too low. | Turn off system, check all speaker wires for shorts; Ensure adequate ventilation; Check vehicle's battery voltage; Verify speaker impedance. |
| Amppenyangga tidak dihidupkan | No +12V power; No ground connection; No remote signal (if not using Auto-Turn-On); Blown fuse. | Check fuse, power, and ground wires; Verify remote wire connection or Auto-Turn-On setting. |
9. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | QS-FOUR |
| Saluran | 4 |
| Output Power (RMS @ 4 Ω) | 4 x 35 W |
| Output Power (RMS @ 3 Ω) | 4 x 45 W |
| Output Power (RMS @ 2 Ω) | 4 x 60 W |
| Bridged Output Power (RMS @ 4 Ω) | 2 x 120 W |
| Respons Kekerapan | 10 Hz – 60 kHz |
| Total Harmonic Distortion (THD+N @ 5W/RMS) | < 0.007% |
| Kecekapan | Sehingga 90% |
| Penapis Silang | HP/LP switchable @ 80 Hz (Front/Rear) |
| Input Voltage | 12V DC (Min/Max) |
| Dimensi (L x W x H) | 90 x 80 x 35 mm (3.54 x 3.15 x 1.38 inci) |
| Jenis Pemasangan | Freestanding |
| Pematuhan | CE |
10. Waranti dan Sokongan
The ESX QUANTUM QS-FOUR amplifier comes with a manufacturer's warranty. Please refer to the warranty card included with your product or contact your authorized ESX dealer for specific warranty terms and conditions.
For technical support, installation assistance, or service inquiries, please contact your point of purchase or visit the official ESX Car-Audio webtapak untuk maklumat hubungan dan sumber.