Submi SU007 Gaming Chair Instruction Manual

1. Maklumat Keselamatan Penting

Sila baca semua arahan dengan teliti sebelum pemasangan dan penggunaan. Simpan manual ini untuk rujukan masa hadapan.

• Pastikan semua komponen ada dan tidak rosak sebelum pemasangan. Jangan gunakan jika mana-mana bahagian hilang atau rosak.
• We recommend that the chair be used with a weight capacity of 220 lbs (100 kg) or less to ensure optimal comfort and longevity.
• The maximum weight capacity for this chair is 350 lbs (159 kg). Do not exceed this limit to maintain stability and functionality.
• Keep the chair away from heat sources, open flames, and sharp objects to prevent damage to the fabric and frame.
• Jangan berdiri di atas kerusi atau gunakannya sebagai bangku tangga.
• Ensure all screws and bolts are tightened securely during assembly and periodically check for tightness during use.
• Jauhkan kanak-kanak dan haiwan peliharaan dari kawasan perhimpunan.

2. Produk Lebihview

The Submi SU007 Gaming Chair is designed for comfort and support during long periods of sitting. It features a durable fabric upholstery, ergonomic design, and adjustable functions.

Rajah 2.1: Penuh view of the Submi SU007 Gaming Chair.

Ciri-ciri Utama:

• Spring Cushion with Natural Latex: Provides lasting comfort and bounce, preventing sagging.
• Fabrik Bernafas: Premium, skin-friendly fabric for enhanced airflow and reduced heat buildup.
• Ergonomic Spine Support: Curved backrest, latex lumbar pillow, and adjustable headrest for spinal alignment.
• 165° Bersandar: Allows for significant recline for relaxation and back relief, includes a footrest.
• Pembinaan Tahan Lama: All-steel frame, explosion-proof tray, BIFMA-certified Class 4 gas lift, and silent casters.

3. Senarai Bahagian

Before beginning assembly, please verify that all parts listed below are present and undamaged. Refer to the packaging for a detailed visual parts diagram.

• Backrest
• Kusyen Tempat Duduk
• Tempat Letak Tangan (Kiri dan Kanan)
• Mekanisme/Unit Kawalan
• Silinder Angkat Gas
• Penutup Lif Gas
• Pangkalan Lima Bintang
• Roda (5 keping)
• Tempat letak kaki
• Bantal Sokongan Lumbar
• Bantal Headrest
• Hardware Pack (Screws, Washers, Allen Key)

4. Arahan Perhimpunan

Follow these steps carefully to assemble your Submi SU007 Gaming Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

1. Pasang Kastor ke Pangkalan: Masukkan lima roda pemukul ke dalam lubang di hujung setiap kaki tapak lima bintang. Tolak dengan kuat sehingga ia klik pada tempatnya.
2. Pasang Lif Gas: Place the gas lift cylinder into the center hole of the five-star base. Cover the gas lift with the telescopic cover.
3. Lampirkan Mekanisme pada Tempat Duduk: Align the mechanism with the screw holes on the underside of the seat cushion. Ensure the front of the mechanism faces the front of the seat. Secure with screws provided in the hardware pack.
4. Pasangkan Tempat Letak Tangan pada Tempat Duduk: Pasangkan tempat letak tangan pada sisi kusyen tempat duduk menggunakan skru yang ditetapkan. Jangan terlalu ketatkan pada mulanya.
5. Sambung Sandaran ke Tempat Duduk: Align the backrest brackets with the corresponding holes on the seat cushion and armrests. Secure with screws. Once all screws are in place, tighten all armrest and backrest screws firmly.
6. Assemble Chair onto Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the center hole of the mechanism aligns with the top of the gas lift.
7. Pasang Pijakan Kaki: Luncurkan tempat letak kaki ke dalam slot yang ditetapkan di bawah tempat duduk.
8. Pasang Bantal: Secure the lumbar support pillow and headrest pillow to the chair using their elastic straps.

Rajah 4.1: Depan view of the assembled chair.

5. Arahan Operasi

Familiarize yourself with the adjustable features of your Submi SU007 Gaming Chair to optimize your comfort.

5.1. Pelarasan Ketinggian

To adjust the seat height, pull the lever located on the right side of the seat upwards. While pulling the lever, lift your body weight off the seat to raise it, or remain seated to lower it. Release the lever to lock the height.

5.2. Sandaran Belakang

To recline the backrest, pull the recline lever located on the right side of the chair (separate from the height adjustment lever) upwards. Lean back to your desired angle (up to 165°). Release the lever to lock the backrest in position.

Figure 5.1: Chair in a reclined position with footrest extended.

5.3. Operasi Pijakan Kaki

To extend the footrest, pull it outwards from underneath the seat. To retract, push it back in until it is fully stored.

5.4. Lumbar Support and Headrest

The lumbar support and headrest pillows are adjustable. You can slide them up or down along the backrest straps to find the most comfortable position for your neck and lower back.

Figure 5.2: Detail of the adjustable lumbar support pillow.

6. Penyelenggaraan

Penyelenggaraan yang betul akan memanjangkan hayat dan penampilan kerusi permainan anda.

• Pembersihan: Spot clean the fabric upholstery with a mild detergent and a damp cloth. Do not use harsh chemicals or abrasive cleaners. Allow to air dry completely.
• Pemeriksaan: Periksa semua skru dan bolt secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
• Pergerakan: Ensure casters are free of debris to allow smooth movement.
• Elakkan Cahaya Matahari Terus: Pendedahan yang berpanjangan kepada cahaya matahari langsung boleh menyebabkan fabrik menjadi pudar.

7. Penyelesaian masalah

If you encounter issues with your chair, refer to the following common solutions:

• Kerusi berdecit: Periksa dan ketatkan semua skru pemasangan. Sedikit pelincir silikon boleh disapu pada bahagian yang bergerak jika bunyi berderit berterusan.
• Kerusi Tidak Melaraskan Ketinggian: Ensure the gas lift lever is fully engaged. If the gas lift is faulty, it may need replacement.
• Kerusi goyah: Verify that all screws are securely tightened, especially those connecting the mechanism to the seat and the base to the gas lift. Ensure the casters are fully inserted into the base.
• Pemutus Tidak Berguling dengan Lancar: Periksa rambut atau serpihan yang membalut roda kastor dan tanggalkannya.

8. Spesifikasi

9. Waranti dan Sokongan

This product comes with a 30-day money-back guarantee. For specific warranty details, claims, or technical support, please refer to the warranty card included with your purchase or contact Submi customer service through the retailer where the product was purchased.

Please have your model number (SU007) and purchase date available when contacting support.