KYORITSU AC Clamp Meter 2002PA Instruction Manual

1. Lebihview

The KYORITSU AC Clamp Meter 2002PA is a versatile electrical measuring instrument designed for accurate measurement of AC current up to 2000A. It features a large teardrop-shaped core for easy clamping around conductors, a recorder output terminal, and multiple functions including AC/DC voltage, resistance, and continuity testing. This manual provides essential information for safe and effective use of the device.

Figure 1: KYORITSU AC Clamp Meter 2002PA

This image shows the KYORITSU AC Clamp Meter 2002PA, a black handheld device with a red clamp jaw at the top. The display shows "000" and there are several buttons below it. The device is designed for measuring electrical current without direct contact.

2. Maklumat Keselamatan

Always read and understand this instruction manual before using the KYORITSU AC Clamp Meter 2002PA. Failure to follow safety instructions may result in electric shock, fire, or damage to the device. This product complies with IEC 61010-1, IEC 61010-031, IEC 61010-2-032, and IEC 61326-1 standards.

• jangan use the meter if it appears damaged or is operating abnormally.
• jangan memohon voltage atau arus melebihi nilai undian maksimum.
• Pastikan penutup bateri ditutup dengan selamat sebelum beroperasi.
• Sentiasa pakai peralatan pelindung diri (PPE) yang sesuai semasa bekerja dengan litar elektrik.
• jangan use the meter in wet environments or during electrical storms.
• Refer to local and national safety codes for proper electrical work procedures.

3. Ciri-ciri Utama

• Large Teardrop Core: Facilitates easy clamping around thick conductors.
• Pengukuran Arus Tinggi: Capable of measuring large AC currents up to 2000A.
• Pelbagai fungsi: Measures AC current, AC voltage, DC voltage, rintangan, dan kesinambungan.
• Recorder Output Terminal: Allows connection to external recording devices.
• Resolusi Tinggi: Features a small resolution of 0.1A for precise measurements.
• Data Hold & Peak Hold: For capturing stable or peak readings.
• Jimat Kuasa Auto: Extends battery life by automatically turning off after a period of inactivity.

4. Persediaan

4.1 Pemasangan Bateri

1. Cari penutup petak bateri di belakang meter.
2. Use a screwdriver (if required) to open the battery compartment.
3. Insert two AA (R6P, 1.5V) batteries, ensuring correct polarity.
4. Pasang semula penutup petak bateri dan pasangkannya dengan kukuh.

4.2 Connecting Test Leads (for Voltage/Rintangan/Kesinambungan)

1. Insert the red test lead into the VΩ terminal.
2. Insert the black test lead into the COM terminal.
3. Ensure connections are secure before taking measurements.

5. Arahan Operasi

5.1 Mengukur Arus AC

1. Turn the rotary switch to the "ACA" position.
2. Buka clamp jaw by pressing the lever.
3. Enclose only one conductor of the circuit to be measured within the clamp Rahang.
4. Release the lever to close the clamp jaw securely around the conductor.
5. Read the AC current value displayed on the LCD.

5.2 Mengukur Vol ACtage

1. Turn the rotary switch to the "ACV" position.
2. Connect the test leads across the circuit points where voltage perlu diukur.
3. Baca voltagnilai e dipaparkan pada LCD.

5.3 Mengukur DC Voltage

1. Turn the rotary switch to the "DCV" position.
2. Connect the test leads across the circuit points where voltage hendaklah diukur, dengan memerhatikan kekutuban.
3. Baca DC voltagnilai e dipaparkan pada LCD.

5.4 Mengukur Rintangan

1. Putar suis putar ke kedudukan "Ω".
2. Pastikan litar dinyahtenagakan sebelum mengukur rintangan.
3. Connect the test leads across the component or circuit path to be measured.
4. Read the resistance value displayed on the LCD.

5.5 Ujian Kesinambungan

1. Turn the rotary switch to the "Continuity" position (often indicated by a speaker icon).
2. Pastikan litar dinyahtenagakan.
3. Sambungkan petunjuk ujian merentasi komponen atau laluan litar.
4. If continuity exists (resistance below approximately 50±35Ω), the buzzer will sound.

6. Penyelenggaraan

6.1 Pembersihan

• Wipe the meter with a soft, dry cloth.
• jangan gunakan pembersih atau pelarut yang kasar.

6.2 Penggantian Bateri

• When the battery indicator appears on the display, replace the batteries as described in Section 4.1.
• Remove batteries if the meter will not be used for an extended period to prevent leakage.

7. Penyelesaian masalah

8. Spesifikasi

Figure 2: Detailed specifications for KYORITSU AC Clamp Meter 2002PA and 2002R (RMS).

This image displays a table of detailed specifications for the KYORITSU AC Clamp Meter models 2002PA and 2002R. It includes measurement ranges and accuracies for AC current, AC voltage, DC voltage, resistance, and continuity, along with physical dimensions, power source, and compliance standards.

9. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please refer to the contact details provided in the product packaging or visit the official KYORITSU webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.