OOYCYOO 60A 48V 36V 24V 12V
OOYCYOO 60A MPPT Solar Charge Controller User Manual
Model: 60A 48V 36V 24V 12V
1. Pengenalan
The OOYCYOO 60A MPPT Solar Charge Controller is an advanced device designed to efficiently manage power flow from your solar panels to your battery bank. Utilizing Maximum Power Point Tracking (MPPT) technology, it optimizes solar energy harvesting, ensuring rapid and efficient charging for various battery types including lead-acid (Sealed, Gel, Flooded) and Lithium (LFP) batteries across 12V, 24V, 36V, and 48V systems. This controller features a clear LCD display for monitoring system status and multiple safety protections to ensure reliable operation.
Rajah 1: Depan view of the OOYCYOO 60A MPPT Solar Charge Controller, highlighting the LCD display and connection terminals.
2. Ciri-ciri Utama
- 60A MPPT Charging Controller: Mempunyai 4-stage battery charging algorithm (Bulk Charge, Boost Charge, Float Charge, and Equalization) for rapid, efficient, and safe charging.
- Lebar Voltage/Power Support: Supports high PV input power and voltage. The controller can accept solar voltage up to 160V. Recommended solar power: 720W for 12V systems, 1440W for 24V, 2100W for 36V, and 2800W for 48V.
- Keserasian Berbilang Bateri: Compatible with various battery types including lead-acid (Sealed, Gel, Flooded) and Lithium (LFP) batteries. Charging parameters are pre-set and user-definable.
- High Tracking Efficiency: Advanced Maximum Power Point Tracking technology ensures continuous tracking of the array’s maximum power point, achieving tracking efficiency of not less than 98.1% and peak conversion efficiency up to 98%.
- Dual Cooling System: Constructed with die-cast aluminum for excellent heat dissipation. Includes a built-in cooling fan that activates when the temperature exceeds 45°C and turns off below 40°C, extending product life up to 5000 hours in normal use.
- Enhanced Safety Protections: Includes protection against PV overcurrent/power, PV short circuit, PV reverse polarity, night reverse charging, battery reverse polarity, battery over voltage, battery over discharge, battery overheating, controller overheating, lithium battery low temperature, load short circuit, load overload, and TVS high voltage sementara.
Gambar 2: Lebihview of the controller's comprehensive safety protection features.
3. Persediaan dan Pemasangan
Proper installation is crucial for the safe and efficient operation of your solar charge controller. Always ensure all power sources are disconnected before making any connections.
3.1 Connection Order
- Sambungkan Bateri: First, connect the battery to the controller's battery terminals. Ensure correct polarity (+ to + and - to -). The controller will automatically detect the battery voltage.
- Connect the Solar Panels: Next, connect the solar panel array to the controller's PV terminals. Ensure correct polarity. The controller will begin charging the battery.
- Sambungkan Beban DC (Pilihan): Finally, connect your DC load to the load terminals. Do not exceed the maximum rated current for the load output.
Important: Always connect the battery first and disconnect the solar panels first when disassembling the system.
Figure 3: System wiring diagram for the solar charge controller, illustrating connections to solar panels, battery, and DC load.
3.2 Panduan Video Pemasangan
Untuk panduan visual mengenai proses pemasangan, sila rujuk video di bawah:
Video 1: Quick installation guide for a 60A MPPT solar charge controller, demonstrating battery and photovoltaic input cable connections.
4. Operasi
The controller features an LCD display and control buttons for monitoring and adjusting settings.
4.1 Paparan LCD dan Butang
The LCD display provides real-time information on system status, including battery voltage, charging current, and load status. Use the 'SET' button to enter settings mode and the 'A', 'B', 'C', 'D' buttons (or similar navigation buttons) to adjust parameters. A 5-second press on the 'SET' button typically initiates a reset or enters advanced settings.
Figure 4: Illustration of the controller's strong battery adaptability, supporting GEL, AGM, User, SEL, FLD, LI, and LiFePO4 battery types, along with a typical 4-stage keluk pengecasan.
4.2 Battery Type and System Voltage Tetapan
The controller automatically identifies 12V, 24V, 36V, or 48V battery systems. You can select the specific battery type (e.g., Sealed, Gel, Flooded, Lithium) and customize charging parameters if needed. Refer to the specifications table for default values.
Figure 5: Table detailing default and adjustable parameters for 12V, 24V, and 48V battery systems, including float voltage, undervoltage protection, and maximum solar panel input power.
4.3 Operation Video Guides
Explore the operational aspects of the solar charge controller with these video guides:
Video 2: Tamatview of the MPPT Solar Charging Controller (80A model shown), demonstrating its features and basic operation.
Video 3: Detailed operation of an Ampinvt solar charge controller, covering display navigation and settings adjustments.
Video 4: An instructional video on the CM Series solar charge controller, demonstrating how to navigate settings and understand display information.
5. Penyelenggaraan
To ensure the longevity and optimal performance of your OOYCYOO MPPT Solar Charge Controller, follow these maintenance guidelines:
- Pemeriksaan Berkala: Periodically check all wiring connections for tightness and corrosion. Ensure no wires are frayed or damaged.
- Kebersihan: Keep the controller clean and free from dust and debris. Use a dry cloth to wipe the exterior. Do not use liquids or solvents.
- Pengudaraan: Ensure the cooling vents are unobstructed to allow for proper airflow. The built-in fan will operate automatically to dissipate heat.
- Kesihatan Bateri: Monitor your battery bank's health regularly. Ensure batteries are properly maintained according to their manufacturer's recommendations.
6. Penyelesaian masalah
This section outlines common issues and their potential solutions. The controller is equipped with multiple protection functions to prevent damage.
| Issue/Protection Triggered | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| PV Lebih Arus/Kuasa | Solar panel input power or current exceeds controller limits. | Reduce the number of solar panels or ensure total PV power is within specifications. |
| Litar Pendek PV | Short circuit in the solar panel wiring. | Inspect solar panel wiring for damage or incorrect connections and rectify. |
| Polariti Terbalik PV | Solar panel positive and negative terminals are reversed. | Disconnect solar panels and reconnect with correct polarity. |
| Kekutuban Terbalik Bateri | Terminal positif dan negatif bateri diterbalikkan. | Disconnect battery and reconnect with correct polarity. |
| Bateri Lebih Voltage | Bateri voltage melebihi vol lebih yang ditetapkantage titik perlindungan. | Check battery type settings; ensure battery is not faulty. |
| Bateri Lebih Nyahcas | Bateri voltage drops below the set over-discharge protection point. | Reduce load, charge battery, or check battery health. |
| Pengawal Terlalu Panas | Internal temperature of the controller is too high. | Ensure adequate ventilation around the controller. Check if the cooling fan is operating. Reduce load if necessary. |
| Muatkan Litar Pendek | Short circuit in the DC load wiring. | Inspect load wiring for damage or incorrect connections and rectify. |
| Beban Beban | Connected DC load exceeds the controller's maximum load current. | Reduce the total power of the connected DC loads. |
7. Spesifikasi Teknikal
| Parameter | Nilai |
|---|---|
| Kadar Caj Semasa | 60A |
| Sistem Nominal Voltage | 12V/24V/36V/48V DC Auto Identifying |
| Maks. Litar Terbuka PV Voltage | 160VDC |
| Max. PV Input Power (12V System) | 720W |
| Max. PV Input Power (24V System) | 1440W |
| Max. PV Input Power (36V System) | 2100W |
| Max. PV Input Power (48V System) | 2800W |
| Bateri Voltage Julat | 9V~55V |
| Power Terminal Wire Gauge | 6-12 AWG |
| Dimensi (L x W x H) | 27.9L x 27.9L x 6.4T Sentimeter (11 x 6 x 2.5 inci) |
| bahan | Aluminium die-cast |
| Jenis Paparan | LCD |
| Kecekapan Penjejakan | ≥ 98.1% |
| Kecekapan Penukaran Puncak | Sehingga 98% |
8. Maklumat Waranti
Specific warranty details for the OOYCYOO 60A MPPT Solar Charge Controller are not provided in this manual. Please refer to the product packaging, the retailer's website, or contact the manufacturer directly for warranty terms and conditions.
9. Sokongan dan Hubungan
For further assistance, technical support, or to access additional resources, please refer to the manufacturer's official website or contact their customer service. You may also find additional information by scanning the QR code often found on the product or packaging.
A relevant link for additional information or support may be found at: http://qr61.cn/oQXA1T/qsECN8r
Rajah 6: Sisi view of the controller, displaying regulatory compliance marks and a QR code for additional information.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.