VISLONE 300W Electric Paint Sprayer User Manual

1. Arahan Keselamatan Penting

Baca semua amaran keselamatan, arahan, ilustrasi dan spesifikasi yang disediakan dengan alat kuasa ini. Kegagalan mematuhi semua arahan yang disenaraikan di bawah boleh mengakibatkan renjatan elektrik, kebakaran dan/atau kecederaan serius.

• Keselamatan Kawasan Kerja: Pastikan kawasan kerja bersih dan terang. Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
• Keselamatan Elektrik: Palam alat kuasa mesti sepadan dengan alur keluar. Jangan sekali-kali mengubah suai palam dalam apa jua cara. Elakkan sentuhan badan dengan permukaan yang dibumikan atau dibumikan.
• Keselamatan Diri: Always wear eye protection, respiratory protection, and appropriate clothing. Do not overreach. Maintain proper footing and balance at all times.
• Penggunaan dan Penjagaan Alat: Jangan paksa alat kuasa. Gunakan alat kuasa yang betul untuk aplikasi anda. Putuskan sambungan palam daripada sumber kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alatan kuasa.
• Specific Sprayer Safety: Ensure proper ventilation when spraying. Do not spray flammable materials near open flames or ignition sources. Always clean the sprayer thoroughly after each use.

2. Produk Lebihview dan Isi Pakej

The VISLONE 300W Electric Paint Sprayer is designed for efficient application of various coatings. Familiarize yourself with its components and ensure all items are present.

Gambar 2.1: Lebihview of the VISLONE 300W Electric Paint Sprayer.

2.1 Package List:

• 1 x Paint Sprayer
• 2 x Bateri (1300mAh)
• 1 x Berus Pembersih
• 1 x Jarum Pembersih
• 4 x Nozzles (Φ1.0mm, 1.8mm, 2.0mm, 2.5mm)
• 3 x Gasket
• 1 x Viscosity Cup
• 1 x Manual Pengguna (dokumen ini)
• 1 x Pengecas

3. Persediaan dan Pemasangan

3.1 Menyediakan Cat

1. Ensure the paint or coating material is suitable for spray application.
2. Use the provided viscosity cup to check the paint's viscosity. Thin the paint with the appropriate solvent (water for latex, mineral spirits for oil-based) until it passes through the viscosity cup within the recommended time (refer to paint manufacturer's instructions).
3. Strain the thinned paint to remove any lumps or debris that could clog the nozzle.

3.2 Memasang Penyembur

1. Attach the paint container (800ml tank) to the sprayer body by screwing it securely.
2. Insert a charged battery into the battery slot at the base of the handle until it clicks into place.

Figure 3.1: The 800ml capacity paint tank attached to the sprayer.

3.3 Selecting and Installing Nozzles

The sprayer includes four copper nozzles of different sizes (Φ1.0mm, 1.8mm, 2.0mm, 2.5mm) for various paint types and project requirements.

1. Choose the appropriate nozzle size for your paint and desired finish. Generally, smaller nozzles are for thinner materials and finer finishes, while larger nozzles are for thicker materials and faster coverage.
2. Unscrew the nozzle cap from the front of the sprayer.
3. Insert the selected nozzle and ensure a gasket is properly seated.
4. Screw the nozzle cap back on securely.

Figure 3.2: The four interchangeable copper nozzles (1.0mm, 1.8mm, 2.0mm, 2.5mm).

3.4 Melaraskan Corak Semburan

The sprayer offers three spray patterns: horizontal, vertical, and circular. Rotate the air cap to select the desired pattern.

• Mendatar: For spraying up and down motions.
• Menegak: For spraying side to side motions.
• Pekeliling: For small areas or detailed work.

4. Operasi

4.1 Powering On and Testing

1. Ensure the sprayer is fully assembled and the paint tank is filled.
2. Point the sprayer at a test surface (e.g., cardboard) and press the trigger to start spraying.
3. Adjust the flow control knob on the sprayer to achieve the desired paint output. The flow rate can be adjusted between 500-800ml/min.

Figure 4.1: Adjusting the flow control and selecting spray patterns (circular, horizontal, vertical).

4.2 Teknik Semburan

• Maintain a consistent distance (typically 6-12 inches) from the surface being painted.
• Move the sprayer in smooth, even strokes, overlapping each pass by about 50% to ensure uniform coverage.
• Lepaskan picu pada penghujung setiap lejang untuk mengelakkan pembentukan cat.
• For best results, apply multiple thin coats rather than one thick coat.

Gambar 4.2: Cthamples of the paint sprayer's application on furniture, walls, cars, and fences.

5. Penyelenggaraan dan Pembersihan

Proper cleaning after each use is essential to ensure the longevity and optimal performance of your paint sprayer.

5.1 Pembongkaran untuk Pembersihan

1. Disconnect the battery from the sprayer.
2. Unscrew the paint container and empty any remaining paint.
3. Unscrew the nozzle cap and remove the nozzle and gasket.
4. The front section of the sprayer can be easily detached from the motor housing for thorough cleaning.

Figure 5.1: The sprayer's design allows for easy disassembly for cleaning.

5.2 Prosedur Pembersihan

1. Fill the paint container with the appropriate cleaning solution (water for water-based paints, solvent for oil-based paints).
2. Reattach the container and spray the cleaning solution through the sprayer until it runs clear.
3. Thoroughly clean all disassembled parts (nozzle, gasket, container, suction tube) using the provided cleaning brush and needle.
4. Lap bahagian luar penyembur dengan iklanamp kain.
5. Allow all parts to dry completely before reassembly or storage.

5.3 Penyimpanan

Store the clean, dry sprayer in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is removed if storing for extended periods.

6. Penyelesaian masalah

7. Spesifikasi

Figure 7.1: Dimensions of the VISLONE 300W Electric Paint Sprayer.

8. Waranti dan Sokongan

For warranty information or technical support, please refer to the contact details provided by your retailer or visit the official VISLONE webtapak. Simpan resit pembelian anda sebagai bukti pembelian.

Anda boleh melawat VISLONE Store on Amazon untuk maklumat lanjut.