pengenalan
Thank you for choosing the fishkeeper LED Aquarium Light FK099-1. This light is designed to provide optimal lighting for your freshwater aquarium, simulating natural lighting cycles to support plant growth and fish health. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your product.
Amaran Keselamatan Penting
- Tidak boleh tenggelam: This aquarium light has a water-resistant aluminum housing but is not submersible. Do not immerse the light fixture in water.
- Filem Pelindung: A thin protective film is applied to the light board to prevent scratches during transportation. Please remove this film before use to ensure optimal lighting effect. Failure to do so will result in dimmer illumination.
- Sumber Kuasa: Use only with the provided universal power adapter (AC 100-240V). Ensure the power outlet matches the specified voltage.
- Pemasangan: Ensure the clip-on bracket is securely fastened to the aquarium glass.
- Penyelenggaraan: Sentiasa cabut plag lampu daripada sumber kuasa sebelum melakukan sebarang penyelenggaraan atau pembersihan.
- Pensijilan: This product is Safety-certified (CE).
Apa yang ada dalam Kotak
Pakej termasuk komponen berikut:
- fishkeeper LED Aquarium Light (FK099-1)
- Universal Power Adapter (AC 100-240V)
- Kurung Clip-on
Spesifikasi Produk
| Ciri | Perincian |
|---|---|
| Nama Model | FK099-1 |
| Wattage | 6 watt |
| Saiz Tangki Disyorkan | 1-5 Gallons (7" to 18" tanks) |
| Jenis Sumber Cahaya | LED (5730 LED) |
| Warna Cerah | White, Blue, Full Spectrum (RGBW) |
| Tahap Kecerahan | 10 peringkat |
| Timer Durations | 4H, 8H, 12H |
| Ciri Khas | 24/7 Natural Lighting Cycle, Auto On/Off, Adjustable Bracket, Memory Function |
| Jenis Pemasangan | Clip On (for tanks less than 0.98 inches thick) |
| bahan | Aluminium, Plastik |
| Sumber Kuasa | Corded Electric (AC 100-240V) |
| Berat Barang | 9.9 auns |
Arahan Persediaan
- Bongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
- Keluarkan Filem Pelindung: Locate and gently peel off the thin protective film from the LED light board. This film is for transport protection and must be removed for proper light output.
- Lampirkan pada Akuarium:
- Position the clip-on bracket onto the edge of your aquarium. Ensure your tank's glass thickness is less than 0.98 inches (2.5 cm) for a secure fit.
- Tighten the screw on the bracket until the light is firmly attached to the tank. Do not overtighten.
Figure 2: Securely attaching the clip-on bracket to the aquarium rim. 
Figure 3: The clip-on bracket is designed for tank glass up to 0.98 inches thick. - Laraskan Kedudukan Cahaya: The light features an adjustable bracket allowing 180° vertical and 360° horizontal rotation. Adjust the light to your desired angle and height over the aquarium.
- Sambungkan Kuasa: Connect the power adapter to the light and then plug it into a suitable electrical outlet.
Video 1: Demonstrates the installation of the fishkeeper LED Aquarium Light, including attaching the clip and adjusting the bracket.
Arahan Operasi
The fishkeeper LED Aquarium Light offers various modes and settings controlled via the inline controller.
Fungsi Pengawal:
- Power Button (M): Press to cycle through different light modes (White, Blue, Full Spectrum, Off). Long press to enter 24/7 mode.
- Brightness Buttons (+/-): Adjusts brightness in 10 levels (10% to 100%). Not adjustable in 24/7 mode.
- Butang Pemasa (Ikon Jam): Sets the timer duration for 4H, 8H, or 12H.
- Butang 24/7: Activates the 24/7 natural lighting cycle.
1. 24/7 Natural Lighting Cycle Mode
This mode simulates a natural 24-hour cycle of sunrise, daylight, sunset, and moonlight. It automatically adjusts color and brightness throughout the day to promote plant growth and fish health. The cycle runs daily from 6:00 AM to 12:00 AM (midnight) with no further setup required after initial time synchronization.
- Pengaktifan: Press the "24/7" button on the controller.
- Jadual:
- 6:00 AM - 8:00 AM: Sunrise (gradual increase in light)
- 8:00 AM - 3:00 PM: Day Light (full brightness)
- 3:00 PM - 6:00 PM: Sunset (gradual decrease in light)
- 6:00 PM - 12:00 AM: Moonlight (blue light)
- 12:00 AM - 6:00 AM: Off
- Nota: Brightness is not adjustable in 24/7 mode.
2. Adjustable Timer & Brightness (DIY Mode)
In DIY mode, you can manually select light color, brightness, and set a timer duration.
- Mod Warna: Press the 'M' (Mode) button to cycle through:
- Mod Putih: White/Green LEDs active.
- Mod Biru: Blue/Red LEDs active.
- Full Spectrum Mode: All RGBW LEDs active.
Figure 6: Available color modes for your aquarium. - Pelarasan Kecerahan: Use the '+' and '-' buttons to select from 10 brightness levels (10% to 100%) for the chosen color mode.
Figure 7: Adjusting brightness levels from 10% to 100%. - Tetapan Pemasa: Press the 'Timer' button to select a duration of 4 hours, 8 hours, or 12 hours. The light will automatically turn off after the selected duration.
Figure 8: Setting the timer for 4, 8, or 12 hours. - Fungsi Memori: The light retains your last selected settings (color mode, brightness, and timer) even after a power interruption. No need to reset after power failure.
Video 2: Demonstrates the various lighting modes, brightness levels, and timer functions of the fishkeeper LED Aquarium Light.
Penyelenggaraan
Regular maintenance ensures optimal performance and extends the lifespan of your aquarium light.
- Pembersihan: Always unplug the light before cleaning. Wipe the light housing and LED surface with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang melelas. Pastikan tiada air memasuki komponen elektrik.
- Pemeriksaan: Periodically check the power cord and connections for any signs of damage. If any damage is found, discontinue use and contact customer support.
- Pelesapan Haba: The aluminum alloy design provides fast heat dissipation. Ensure the light is not covered or obstructed to allow proper airflow.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Tiada kuasa, sambungan longgar, soket rosak. | Check power plug and connections. Test the outlet with another device. Ensure the power adapter is correctly connected. |
| Light is dim or uneven. | Protective film not removed, brightness set too low, dirty LED surface. | Ensure the protective film has been removed from the LED board. Increase brightness using the '+' button. Clean the LED surface. |
| Fungsi pemasa tidak berfungsi dengan betul. | Incorrect timer setting, power interruption. | Re-set the timer duration. If in 24/7 mode, ensure the initial time sync is correct. The memory function should restore settings after power interruption. |
| Cahaya berkelip-kelip. | Bekalan kuasa tidak stabil, sambungan longgar. | Check power connections. Try plugging into a different outlet. |
Waranti dan Sokongan
For warranty information or technical support, please refer to the product packaging or contact fishkeeper customer service directly. Keep your purchase receipt for warranty claims.