pengenalan
This manual provides instructions for the proper installation, operation, and maintenance of the Generic Cross-flow HG070-18w Anemone and Fish Guard. This product is designed to protect delicate aquatic life, such as fish and anemones, from the intake of cross-flow pumps in marine and freshwater aquariums.
The guard is constructed from high-quality, aquarium-safe PETG material, ensuring durability and safety in continuous underwater use while maintaining optimal water flow.
Ciri-ciri Produk
- Dibuat di Amerika Syarikat: Crafted with precision for quality assurance.
- Full Pump Coverage: Designed to completely surround the pump, preventing aquatic inhabitants from entering the intake.
- 5mm Guard Holes: Engineered to allow excellent water flow while effectively blocking small creatures.
- Aquarium-Safe PETG: Manufactured from durable, non-toxic plastic suitable for long-term underwater performance.
- Pemasangan Mudah: Requires no tools; the guard is secured by the pump’s existing magnet.
- Mudah dibersihkan: Easily removable for routine cleaning to maintain pump efficiency.
- Dibina untuk Kekal: Resistant to warping, cracking, or degradation under continuous water flow.
Maklumat Keselamatan
Please read and understand all instructions before installing and using this product. Failure to follow these instructions may result in damage to the product or harm to your aquarium inhabitants.
- Ensure the guard is correctly sized for your specific cross-flow pump model (HG070-18w).
- Always disconnect power to your pump before installation or maintenance.
- Verify that the guard is securely attached and does not interfere with pump operation or water flow.
- The PETG material is aquarium-safe; however, regularly inspect the guard for any signs of wear or damage.
Kandungan Pakej
- 1 x Cross-flow HG070-18w Anemone and Fish Guard
Persediaan dan Pemasangan
Follow these steps to install the anemone and fish guard:
- Sediakan Pam: Ensure your cross-flow pump (model HG070-18w) is clean and free of debris. Disconnect the pump from power before proceeding.
- Position the Guard: Carefully place the guard around the pump, ensuring it fully covers the intake area. The guard is designed to fit snugly around the HG070-18w model.
- Lampiran Selamat: The guard utilizes the pump's existing magnet for secure attachment. Position the guard so that the pump's magnet holds it firmly in place against the aquarium glass. No additional tools or fasteners are required.
- Sahkan Peletakan: Once installed, gently check that the guard is stable and does not obstruct the pump's impeller or outflow. Ensure there are no gaps where small inhabitants could enter.
- Sambung semula Kuasa: Reconnect power to your pump and observe its operation to confirm proper water flow and guard stability.
Image: The Cross-flow HG070-18w Anemone and Fish Guard shown installed on a compatible cross-flow pump.
Imej: Lebih dekat view of the guard's fit around the pump, highlighting the secure placement.
Arahan Operasi
Once installed, the Cross-flow HG070-18w Anemone and Fish Guard operates passively to protect your aquarium inhabitants. Ensure the pump is running as usual. The guard's 5mm holes are designed to maintain optimal water flow while preventing entry by fish, shrimp, and anemones.
Image: The anemone and fish guard submerged in an aquarium, protecting aquatic life from the pump.
Penyelenggaraan
Regular cleaning of the guard is essential to prevent debris buildup and maintain efficient water flow through your pump.
- Pembuangan: Disconnect power to the pump. Gently remove the guard from around the pump.
- Pembersihan: Rinse the guard thoroughly under clean water to remove any algae, detritus, or other buildup. A soft brush can be used for stubborn areas. Do not use harsh chemicals or abrasive cleaners.
- Pemeriksaan: While cleaning, inspect the guard for any signs of damage, cracks, or excessive wear. If significant damage is observed, consider replacing the guard.
- Pemasangan semula: Reinstall the clean guard by following the "Setup and Installation" steps.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Guard does not fit pump correctly. | Incorrect pump model or guard orientation. | Ensure your pump is the HG070-18w model. Re-orient the guard to ensure proper alignment. |
| Aliran air dari pam berkurangan. | Guard holes are clogged with debris or algae. | Remove and clean the guard thoroughly as per maintenance instructions. |
| Guard feels loose or unstable. | Improper seating or pump magnet not fully engaged. | Ensure the guard is fully seated around the pump and the pump's magnet is securely holding it against the glass. |
Spesifikasi
- model: HG070-18w
- Bahan: Aquarium-Safe PETG
- Guard Hole Size: 5mm
- Dimensi Produk (LxWxH): Kira-kira 12 x 3 x 2 inci
- Berat Barang: Kira-kira 3 auns
- warna: Hitam
Imej: Depan view of the Cross-flow HG070-18w Anemone and Fish Guard, showcasing reka bentuknya.
Imej: Atas ke bawah view of the guard, illustrating its full coverage design.
Imej: Terperinci view of the 5mm mesh pattern on the guard, designed for optimal flow and protection.
Imej: Side profile of the guard, showing its curved shape for cross-flow pumps.
Waranti dan Sokongan
Specific warranty information for the Generic Cross-flow HG070-18w Anemone and Fish Guard is not provided in the product details. For any support inquiries or questions regarding your product, please refer to the retailer or manufacturer's contact information provided at the point of purchase.
