Andeman EP-177
Pemula Jump Andeman 4000A dengan Pemampat Udara 150PSI, Manual Pengguna Model EP-177
Comprehensive instructions for operating and maintaining your Andeman EP-177 device.
1. Pengenalan
This manual provides essential information for the safe and effective use of your Andeman EP-177 4000A Jump Starter with 150PSI Air Compressor. Please read all instructions carefully before operation and retain this manual for future reference.

Image 1.1: Andeman EP-177 Jump Starter with Air Compressor and included accessories.
2. Apa yang ada di dalam Kotak
Sahkan bahawa semua komponen terdapat dalam pakej:
- Epower-177 Jump Starter x1
- Gas Needle x1
- Gas Nozzle x2
- Panduan Pengguna x1
- Kabel Pelompat x1
- Inflatable Tube x1
- Beg simpanan x1
- Kabel Pengecasan x1

Image 2.1: All items included in the Andeman EP-177 product package.
3. Ciri-ciri Produk
The Andeman EP-177 combines multiple functionalities for automotive and portable power needs:
- 4000A Peak Jump Starter: Capable of starting 12V vehicles with up to 8.5L gas or 7L diesel engines.
- 150PSI Air Compressor: Integrated portable inflator for tires, sports equipment, and other inflatables.
- Bank Kuasa 24000mAh: High-capacity battery with Type-C Quick Charge and USB-A/USB-B outputs for charging electronic devices.
- Lampu LED Berbilang Mod: Features standard illumination, SOS, and alert modes for various situations.
- 10 Perlindungan Keselamatan: Advanced safety features including overload, spark, reverse polarity, and over-temperature protection.

Image 3.1: The Andeman EP-177 functioning as both a jump starter and a tire inflator.
4. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Jenama | Andeman |
| Model | Epower-177 |
| Arus Keluaran Puncak | 4000 Amps |
| Kapasiti Bateri | 24000mAh |
| Keserasian Enjin | Sehingga 8.5L Gas / 7L Diesel |
| Tekanan Pemampat Udara | Up to 150PSI |
| Charging Input (Type-C) | 5V/3A, 9V/2A, 12V/1.5A |
| Keluaran USB-A | QC3.0 |
| Output USB-B | 5V/3A |
| Keluaran DC | 15V |
| Dimensi Produk | 1.97"D x 4.33"W x 7.68"H |
| Berat Barang | 2.86 paun |
| Jenis Bateri | Litium Ion |
5. Persediaan
5.1 Pengecasan Awal
Before first use, fully charge the Andeman EP-177. Connect the provided charging cable to the Type-C input port on the device and to a suitable USB power adapter (not included). The device supports fast charging, reaching full capacity in approximately 1.8 hours. A 10-minute charge can provide enough power for an emergency jump start.

Image 5.1: Charging the Andeman EP-177 via its Type-C port.
5.2 Menyemak Tahap Bateri
The device features a digital display indicating the battery power percentage. Ensure the device is adequately charged before use, especially for jump-starting vehicles.
6. Arahan Operasi
6.1 Lompat Memulakan Kenderaan
- Langkah 1: Insert the jumper cable into the jump starter's port. Ensure a secure connection.
- Langkah 2: Sambungkan cl merahamp to the vehicle's positive (+) battery terminal and the black clamp ke terminal bateri negatif (-) kenderaan.
- Langkah 3: Once the green indicator light on the jumper cable connector illuminates, start the vehicle.
- Langkah 4: Selepas kenderaan dihidupkan, tanggalkan kabel pelompat clamps from the vehicle battery within 30 seconds, then disconnect the cable from the jump starter.

Image 6.1: Step-by-step guide for jump starting a vehicle.
6.2 Menggunakan Pemampat Udara
- Langkah 1: Press and hold the power button for 2 seconds to turn on the device. Short press to switch between on/pause.
- Langkah 2: Choose the appropriate nozzle/needle and connect it to the inflatable tube, then attach to the item to be inflated.
- Langkah 3: Short press the mode button to select the desired inflation mode (car, motorcycle, bicycle, ball). Use the "+" or "-" buttons to adjust the target pressure.
- Langkah 4: Start inflation by short pressing the power button. The pump will stop automatically at the set pressure or when paused manually.
Nota: For continuous use, allow the compressor to rest for 10 minutes after every 10 minutes of operation to prevent overheating.

Image 6.2: The Andeman EP-177 functioning as a tire inflator.
6.3 Menggunakan sebagai Power Bank
The device can charge various electronic devices via its USB-A (QC3.0), USB-B (5V/3A), and Type-C (5V/3A, 9V/2A, 12V/1.5A) output ports. Connect your device using a compatible charging cable.

Image 6.3: The Andeman EP-177 used as a power bank to charge various devices.
6.4 Menggunakan Lampu Suluh LED
The integrated LED light offers three modes:
- Standard Lighting: Memberikan pencahayaan berterusan.
- Mod SOS: Emits an SOS signal for emergency situations.
- Mod Makluman: Flashing light for increased visibility.
To activate or cycle through modes, press the dedicated flashlight button on the device.

Image 6.4: The Andeman EP-177's LED flashlight in use.
7. Langkah-langkah Keselamatan
Observe the following safety guidelines to prevent injury or damage to the device:
- Do not short-circuit the jump starter terminals.
- Jangan dedahkan peranti kepada suhu yang melampau (di bawah -20°C atau melebihi 60°C).
- Jangan buka peranti.
- Jauhkan daripada kanak-kanak.
- Ensure proper polarity when connecting to a vehicle battery (red to positive, black to negative).
- Remove jumper cables within 30 seconds after the vehicle starts.
- Avoid prolonged continuous use of the air compressor to prevent overheating.

Imej 7.1: Selesaiview daripada 10 perlindungan keselamatan.
8. Penyelenggaraan
- Simpan peranti di tempat yang sejuk dan kering jauh dari cahaya matahari langsung.
- Charge the device at least once every 3-6 months to maintain battery health, even if not in use.
- Bersihkan bahagian luar dengan lembut, damp kain. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Pastikan semua port bebas daripada habuk dan serpihan.
9. Penyelesaian masalah
- Peranti tidak dihidupkan:
- Pastikan peranti telah dicas. Sambungkannya ke sumber kuasa dan biarkan ia dicas untuk seketika.
- Kenderaan tidak boleh dihidupkan selepas dihidupkan semula:
- Check battery connections for proper polarity and secure contact. Ensure the jump starter has sufficient charge. The vehicle battery may be severely damaged or the vehicle may have other mechanical issues.
- Air compressor is not inflating:
- Verify that the nozzle is correctly attached and the target pressure is set. Check the device's battery level. Ensure the power button has been pressed to start inflation.
- Device is overheating:
- Stop operation immediately and allow the device to cool down. This is particularly important for the air compressor after extended use.
10. Waranti dan Sokongan
For warranty information and customer support, please refer to the contact details provided in your product packaging or visit the official Andeman webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.