Manual Pengguna Pemula Jump Andeman 4000A (Model EP-166)

1. Pengenalan

Thank you for choosing the Andeman 4000A Jump Starter, Model EP-166. This device is designed to provide reliable power for jump-starting vehicles and charging electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.

1.1. Apa yang ada di dalam Kotak

• Epower-166 Jump Starter Unit x1
• Pintar Clamps x1
• Kabel Pengecasan Jenis-C x1
• Manual Pengguna x1
• Kotak Simpanan x1

Image: All components included in the Andeman Jump Starter package, laid out for clear visibility.

2. Langkah-langkah Keselamatan

Your safety is paramount. This device incorporates advanced safety features, but proper handling is crucial. The Andeman EP-166 is UL Certified, ensuring it meets stringent safety standards.

2.1. Integrated Safety Protections

The intelligent safety terminals feature 10 advanced protections:

• Perlindungan Lebihan
• Perlindungan Percikan
• Perlindungan Caj Terbalik
• Perlindungan Polariti Terbalik
• Lebih Perlindungan Semasa
• Perlindungan Suhu Rendah
• Perlindungan Lebih Caj
• Perlindungan Litar pintas
• Lebih Voltage Perlindungan
• Perlindungan Suhu Tinggi

Imej: Satu dalaman view highlighting the 10 advanced safety protections integrated into the Andeman Jump Starter for secure operation.

2.2. Pertimbangan Alam Sekitar

• Julat Suhu: The device is engineered to operate in extreme temperatures, from -20°C (-4°F) to 60°C (140°F).
• Penilaian Kalis Air: With an IP65 waterproof rating, the unit is resistant to rain and splashes. Avoid submerging the device in water.
• Ketahanan: The design is drop-proof and sand-proof for enhanced durability in various environments.

3. Persediaan

3.1. Mengecas Pemula Lompat

Before initial use, fully charge the jump starter. It features Type-C 3.0A Quick Charging technology, allowing a full charge from 0% to 100% in approximately 1.8 hours. Each complete charge provides up to 80 jump-starts.

• Connect the provided Type-C charging cable to the jump starter's input port.
• Sambungkan hujung kabel yang satu lagi ke penyesuai kuasa USB yang sesuai (tidak disertakan).
• Paparan LED akan menunjukkan kemajuan pengecasan.

Image: The jump starter being fast-charged via its Type-C port inside a vehicle, showing its quick recharge capability.

4. Arahan Operasi

4.1. Lompat Memulakan Kenderaan

1. Pastikan jump starter dicas dengan secukupnya.
2. Masukkan cl pintaramps cable into the jump starter's dedicated port.
3. Sambungkan cl merah (+).amp ke terminal positif bateri kenderaan.
4. Sambungkan cl hitam (-).amp ke terminal negatif bateri kenderaan.
5. Check the indicator light on the smart clamps. A solid green light indicates it's safe to proceed. If it flashes red or beeps, refer to the troubleshooting section.
6. Hidupkan enjin kenderaan.
7. Once the vehicle starts, remove the smart clamps from the vehicle battery within 30 seconds.
8. Disconnect the smart clamps cable from the jump starter.

Image: The Andeman Jump Starter connected to a car battery, illustrating the ease of use for jump-starting a vehicle.

4.2. Menggunakan sebagai Power Bank

The 20000mAh capacity allows the jump starter to function as a power bank for various electronic devices.

• Connect your device's charging cable to one of the available USB output ports (USB-A: 2.1A; 5V/9V/12V or USB-B: 3A; 5V/2.1A).
• The dedicated Type-C port can also charge laptops at speeds comparable to their original adapters.
• Paparan LED akan menunjukkan peratusan bateri yang tinggaltage.

Image: The 20000mAh power bank feature in action, charging a laptop, smartphone, tablet, headphones, and smartwatch.

4.3. Menggunakan Lampu Suluh LED

The built-in ultra-bright LED flashlight offers three lighting modes:

• Lampu suluh: For general illumination (e.g., inspecting an engine, changing a tire).
• SOS: A life-saving signal light for emergencies.
• Strobo: A traffic warning light to alert oncoming traffic.

To activate and cycle through the modes, press the dedicated flashlight button on the unit.

Image: Illustration of the three versatile LED lighting modes: standard flashlight, SOS signal, and strobe, useful for various emergencies.

5. Penyelenggaraan

5.1. Charging and Storage

• Recharge the jump starter every 3-6 months if it is not in regular use to maintain battery health.
• Store the device in its protective storage box in a cool, dry place, away from direct sunlight and extreme temperatures.

6. Penyelesaian masalah

cl yang bijakamps provide visual and audible feedback to help diagnose common issues:

7. Spesifikasi

8. Video Produk Rasmi

9. Waranti dan Sokongan

For detailed warranty information and customer support, please refer to the user manual included in your product package. You may also contact Andeman customer service directly via email: andeman@andeman.com.