XikeStor SKS7300-8F4X Layer 2 Managed 5G+10G Network Switch

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and management of your XikeStor SKS7300-8F4X Layer 2 Managed Switch. This device is designed for high-speed network environments, offering advanced features for studios, NAS clusters, and enterprise infrastructure. Please read this manual thoroughly before using the product to ensure proper setup and optimal performance.

Imej: Depan view of the XikeStor SKS7300-8F4X switch, illustrating its 8x5G RJ45 ports and 4x10G SFP+ ports, along with key features like VLAN, Spanning Tree Protocol, QoS, Port Mirroring, Link Aggregation, and Port Security.

2. Produk Lebihview

2.1 Ciri-ciri Utama

• Cip Berprestasi Tinggi: Equipped with a Realtek RTL9313 industrial switch chip, supporting 2.5G/5G/10G Base-T copper modules and mainstream SFP+ optical modules for stable operation in diverse network environments.
• 8+4 Full Port Wire-Speed Forwarding: Features 8 auto-sensing 2.5G/5G RJ45 ports and 4 10G SFP+ ports, ensuring non-blocking forwarding across all ports. Offers a switching capacity of 160Gbps and a packet forwarding capability of 119.04Mpps, preventing packet loss even under full load. Ideal for 4K/8K editing, high-speed NAS connections, and broadband aggregation.
• Silent Active Cooling: Incorporates a metal casing, heat fins, and a temperature-controlled silent fan, maintaining noise levels at or below 35dB under load. Provides over 20% higher heat dissipation efficiency compared to passive cooling.
• Web/CLI Dual Management: Offers intuitive management via both a Web GUI and a Command Line Interface (CLI), with a Console-USB cable included. Supports SSH/SNMP v3 and a full suite of enterprise L2+ features, including 802.1Q VLAN (MAC/IP-based VLAN, QinQ, Voice VLAN), Link Aggregation (Static/LACP), ERPS ring protection, IGMP Snooping, QoS with 8 queues, ACL, and sFlow port mirroring.

2.2 Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

• XikeStor SKS7300-8F4X Switch Unit
• 19-inch Rack Mount Brackets (Left and Right)
• Skru Pemasangan Kurungan
• Console Cable (for management serial connection)
• Rubber Feet (4 pcs)
• Kord Kuasa

3. Persediaan

3.1 Pemasangan Fizikal

1. Pemasangan Rak (Pilihan): Attach the included rack mount brackets to the sides of the switch using the provided screws. Secure the switch into a standard 19-inch rack.
2. Peletakan Desktop: If not rack-mounting, attach the four rubber feet to the bottom of the switch to prevent slipping and ensure proper airflow. Place the switch on a stable, flat surface.
3. Pembumian: Connect a grounding wire to the grounding terminal on the switch and to a proper earth ground. This provides 6KV lightning protection.

3.2 Sambungan Rangkaian

1. Port RJ45: Connect your 2.5G/5G compatible devices (PCs, workstations, WiFi 6 access points, NAS, network cards) to the 8 auto-sensing RJ45 ports using standard Ethernet cables.
2. Port SFP+: For 10G connections, insert compatible SFP+ optical modules into the 4 SFP+ slots and connect fiber optic cables to your 10G network devices.

3.3 Sambungan Kuasa

Connect the power cord to the AC power inlet on the rear panel of the switch and then plug it into a suitable AC power outlet (100-240V, 50/60Hz).

Image: External features of the XikeStor SKS7300-8F4X switch, showing rack mount holes, the 100-240V power input, and the 6KV lightning protection grounding terminal.

4. Arahan Operasi

4.1 Hidupkan

After connecting the power, the switch will automatically power on. The system will perform a self-test. During startup, the fan may operate at maximum speed, then reduce speed once the system is stable and temperature-controlled.

4.2 Penunjuk LED

The front panel features LED indicators to monitor the switch status:

• LED SYS: Indicates system status. (e.g., Solid Green for normal operation, Blinking for system activity).
• LED PWR: Indicates power status. (e.g., Solid Green when powered on).
• Act/Link LEDs (per port): Indicates port activity and link status. (e.g., Solid Green for a stable link, Blinking for data activity).
• LED kelajuan (setiap port): Indicates the connection speed of the port (e.g., 5G, 2.5G, 1G).

5. Antaramuka Pengurusan

The SKS7300-8F4X switch offers two primary methods for management: Web-based Graphical User Interface (GUI) and Command Line Interface (CLI).

5.1 Web Akses GUI

1. Ensure your management PC is connected to an RJ45 port on the switch and is on the same network segment.
2. Buka a web browser and enter the default IP address of the switch. (Refer to the label on the bottom of the switch for the default IP address and login credentials. The default password may be blank or 'admin'.)
3. Masukkan nama pengguna dan kata laluan untuk log masuk ke Web GUI.

5.2 CLI Access

1. Connect the included Console-USB cable from your management PC to the Console port on the switch.
2. Use a terminal emulation program (e.g., PuTTY, Tera Term) on your PC to establish a serial connection to the switch.
3. Configure the serial port settings (e.g., baud rate, data bits, parity, stop bits) as specified in the device documentation.
4. Log masuk menggunakan kelayakan lalai.

5.3 Supported L2+ Features

The switch supports a comprehensive set of Layer 2+ features for advanced network management:

• VLAN: IEEE 802.1Q VLAN, MAC/IP-based VLAN, QinQ, Voice VLAN.
• Gabungan Pautan: Static and LACP (Link Aggregation Control Protocol).
• Protokol Spanning Tree: STP, RSTP, MSTP for loop prevention.
• ERPS Ring Protection: Ethernet Ring Protection Switching for network resilience.
• IGMP Snooping: Optimizes multicast traffic.
• QoS (Kualiti Perkhidmatan): 8 queues for traffic prioritization.
• ACL (Senarai Kawalan Akses): For traffic filtering and security.
• Pencerminan Pelabuhan: For network monitoring and analysis.
• SSH/SNMP v3: Secure remote management.

Image: Screenshot showing both the Web GUI and CLI interfaces for managing the XikeStor SKS7300-8F4X switch, demonstrating dual management capabilities.

6. Penyelenggaraan

6.1 Sistem Penyejukan

The SKS7300-8F4X features an active cooling system with a metal casing, heat fins, and a temperature-controlled silent fan. This design ensures efficient heat dissipation, keeping the device cool even under heavy load and in 24-hour continuous operation environments like data centers and server rooms.

• Ensure adequate airflow around the switch. Do not block ventilation openings.
• Regularly clean dust from the fan vents to maintain optimal cooling performance.

Image: Diagram illustrating the powerful active cooling system of the XikeStor SKS7300-8F4X, highlighting airflow, metal casing, and fan components for efficient heat dissipation.

6.2 Kemas Kini Perisian Tegar

Periksa pengeluar secara berkala webtapak untuk kemas kini perisian tegar. Memastikan perisian tegar dikemas kini memastikan prestasi optimum, keselamatan dan akses kepada ciri baharu.

7. Penyelesaian masalah

Bahagian ini menyediakan penyelesaian kepada isu biasa yang mungkin anda hadapi.

7.1 Tiada Kuasa

• Pastikan kord kuasa disambungkan dengan kukuh pada suis dan soket kuasa.
• Sahkan bahawa alur keluar kuasa berfungsi dengan memasang peranti lain.
• Check the PWR LED on the front panel. If it is off, there might be a power issue.

7.2 No Link/Activity on Port

• Check the Ethernet or fiber cable connection. Ensure it is securely plugged into both the switch and the connected device.
• Sahkan bahawa peranti yang disambungkan telah dihidupkan dan berfungsi dengan betul.
• Try a different port on the switch or a different cable.
• Untuk port SFP+, pastikan modul SFP+ dimasukkan dengan betul dan serasi.

7.3 Tidak Boleh Akses Web GUI/CLI

• Web GUI: Ensure your management PC's IP address is in the same subnet as the switch's default IP address. Verify the default IP address from the product label.
• CLI: Confirm the Console-USB cable is properly connected and the serial port settings in your terminal program match the switch's requirements.
• Verify the username and password. If forgotten, a factory reset might be necessary (consult support for this procedure).

7.4 Prestasi Rangkaian Perlahan

• Check for network loops. Spanning Tree Protocol should prevent this, but misconfigurations can occur.
• Ensure all connected devices are operating at their expected speeds.
• Monitor port utilization via the management interface to identify bottlenecks.
• Verify cable quality and length, especially for high-speed connections.

8. Spesifikasi

9. Waranti dan Sokongan

9.1 Maklumat Waranti

The XikeStor SKS7300-8F4X switch comes with a Waranti pengilang 1 tahun. Additionally, initial defects reported within 30 days of purchase are eligible for immediate replacement.

9.2 Sokongan Pelanggan

For assistance with setup, operation, or any technical issues, please contact XikeStor customer support. We aim to respond to all inquiries within 24 hours.

• Refer to the contact information provided with your product packaging or on the official XikeStor webtapak.
• Have your product model number (SKS7300-8F4X) and purchase details ready when contacting support.

10. Maklumat Keselamatan

Sila patuhi langkah berjaga-jaga keselamatan berikut untuk mengelakkan kerosakan pada peranti atau kecederaan pada diri anda:

• Jangan buka peranti casing. Tiada bahagian yang boleh diservis pengguna di dalamnya.
• Jauhkan peranti daripada air, kelembapan dan suhu yang melampau.
• Pastikan peranti diletakkan di kawasan yang mempunyai pengudaraan yang baik untuk mengelakkan terlalu panas.
• Gunakan hanya penyesuai kuasa yang disediakan atau pengganti yang serasi.
• Properly ground the device using the dedicated grounding terminal to protect against electrical surges.