ROBOTIME Seahorse Barque MCB02 3D Wooden Puzzle Instruction Manual

pengenalan

Thank you for choosing the ROBOTIME Seahorse Barque MCB02 3D Wooden Puzzle. This kit allows you to construct a detailed 1:100 scale model of a classic three-masted sailing ship. Designed for adults and older children, this puzzle provides an engaging and rewarding building experience. Please read these instructions carefully before beginning assembly to ensure a smooth and enjoyable process.

Maklumat Keselamatan

Warning: Not suitable for children under 3 years due to small parts which may present a choking hazard.

• Keep all parts out of reach of small children.
• Exercise caution when detaching pieces from the wooden sheets to avoid splinters or breakage.
• Buang bahan pembungkusan secara bertanggungjawab.

Kandungan Pakej

Your ROBOTIME Seahorse Barque MCB02 kit includes:

• 603 wooden puzzle pieces (on laser-cut sheets)
• Manual arahan pemasangan
• Additional components (e.g., screws, fabric sails, etc., as required for the model)

Image: Layout of laser-cut wooden puzzle sheets and various components for the Seahorse Barque MCB02 kit.

Arahan Perhimpunan

Assembly of the Seahorse Barque MCB02 typically takes approximately 10 hours. Follow the detailed step-by-step instructions provided in the included manual. Here are some general tips:

1. Penyediaan: Lay out all wooden sheets and identify the parts. Refer to the manual for part numbers. Work on a clean, well-lit surface.
2. Mengeluarkan kepingan: Carefully detach each piece from its wooden sheet. If a piece is difficult to remove, use a craft knife or sandpaper to gently loosen it. Detach pieces by pushing them out from the side opposite any printed markings to minimize visible damage.
3. Pengamplasan: Lightly sand the edges of detached pieces if necessary to ensure a smooth fit and remove any small burrs from the laser cutting.
4. Ikut Manual: The included manual provides detailed diagrams and instructions for each step. Pay close attention to the orientation of pieces and the order of assembly.
5. Kepingan Penghubung: Pieces are designed to fit together snugly. Apply gentle, even pressure. If a connection is too tight, do not force it; instead, lightly sand the edges of the connecting tabs.
6. Sails and Rigging: The kit includes 13 sails (8 square and 5 triangular) and rigging components. Follow the manual for proper attachment and tensioning to achieve the authentic look of a sailing ship.
7. Elemen Hiasan: The model features 26 golden decorative elements and a golden seahorse figurehead. Attach these as indicated in the manual to enhance the ship's appearance.

Image: Hands assembling wooden puzzle pieces on a table with the instruction manual open.

Arahan Pengendalian (Paparan)

Once assembled, your ROBOTIME Seahorse Barque MCB02 is a static display model. It features a rotating rudder and adjustable sails for dynamic posing. Place it on a stable, flat surface away from direct sunlight and excessive humidity to preserve its wooden components.

Image: The fully assembled ROBOTIME Seahorse Barque MCB02 3D wooden puzzle model.

Penjagaan dan Penyelenggaraan

• Pembersihan: Habuk model dengan kerap dengan kain lembut, kering atau berus lembut. Elakkan menggunakan pembersih air atau kimia, kerana ini boleh merosakkan kayu.
• Persekitaran: Keep the model in a stable environment, avoiding extreme temperature changes or high humidity, which can cause the wood to warp or crack.
• Pengendalian: Handle the model with care, especially delicate parts like the rigging and sails.

Petua Penyelesaian Masalah

• Pieces don't fit: If pieces are too tight, gently sand the connecting tabs. If too loose, a small amount of wood glue can be used (not included).
• Kepingan pecah: In case of minor breakage, wood glue can often repair the piece. If a critical piece is severely damaged, contact customer support for possible replacements.
• Potongan yang hilang: Double-check all wooden sheets and packaging. If a piece is genuinely missing, contact customer support.

Spesifikasi

Waranti dan Sokongan

Produk ini disertakan dengan a Waranti pengilang selama 2 tahun. For any questions, missing parts, or support needs, please contact ROBOTIME customer service through their official channels or the retailer where the product was purchased.

Anda boleh melawati kedai rasmi ROBOTIME untuk maklumat lanjut: Kedai ROBOTIME