Electactic AP4416-UL HEPA Air Purifier and Humidifier 2-in-1 Instruction Manual

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your Electactic AP4416-UL HEPA Air Purifier and Humidifier 2-in-1. Please read these instructions thoroughly before use and retain them for future reference.

The Electactic AP4416-UL combines air purification and ultrasonic humidification into a single unit, designed to improve indoor air quality and comfort. It features a multi-stage filtration system and intelligent humidity control.

2. Arahan Keselamatan

AMARAN: Untuk mengurangkan risiko kebakaran, kejutan elektrik atau kecederaan, patuhi langkah keselamatan berikut:

• Sentiasa cabut plag perkakas sebelum membersihkan, melakukan penyelenggaraan atau apabila tidak digunakan.
• Jangan kendalikan perkakas dengan kord atau palam yang rosak. Jika kord atau palam rosak, hubungi khidmat pelanggan.
• Jangan gunakan perkakas ini di persekitaran basah seperti bilik mandi atau dobi.
• Jauhkan perkakas daripada sumber haba, cahaya matahari langsung dan bahan mudah terbakar.
• Pastikan saluran masuk dan keluar udara tidak tersumbat.
• Jangan masukkan objek asing ke dalam perkakas.
• Use only clean, distilled water in the humidifier tank to prevent mineral buildup and ensure optimal performance.
• Perkakas ini tidak dimaksudkan untuk digunakan oleh orang (termasuk kanak-kanak) yang kurang keupayaan fizikal, deria, atau mental, atau kurang pengalaman dan pengetahuan, melainkan mereka telah diberi pengawasan atau arahan mengenai penggunaan perkakas oleh orang yang bertanggungjawab untuk keselamatan mereka .
• Kanak-kanak harus diawasi untuk memastikan mereka tidak bermain dengan perkakas.

3. Produk Lebihview

3.1 Komponen

The Electactic AP4416-UL consists of the following main components:

• Humidifier Water Tank (Top section)
• Air Purifier Base (Bottom section)
• Control Panel (Top surface of the air purifier base)
• Air Filter (Located inside the air purifier base)
• Kord Kuasa

Figure 1: Electactic AP4416-UL Air Purifier and Humidifier 2-in-1. This image shows the complete unit, with the humidifier tank on top and the air purifier base below.

3.2 Panel Kawalan dan Paparan

The unit features a touch control panel for easy operation and a digital display for status indication.

Figure 2: Control Panel Layout. This diagram illustrates the various touch buttons and indicators on the control panel, including Night Light, Timer, Humidification, Speed, ON/OFF, AQI Light, Content Display, Replacing Filter Alarm, and Water Shortage Penggera.

• Butang HIDUP/MATI: Menghidupkan atau mematikan unit.
• Butang Kelajuan: Adjusts fan speed for air purification.
• Humidification Button: Activates or deactivates the humidification function and adjusts mist output.
• Butang Pemasa: Menetapkan pemasa operasi (cth., 1-8 jam).
• Butang Lampu Malam: Mengawal ciri lampu malam.
• AQI Light: Indicates air quality (e.g., green for good, yellow for moderate, red for poor).
• Paparan Kandungan: Shows current settings, humidity levels, or error codes.
• Replacing Filter Alarm: Illuminates when the air filter needs replacement.
• Air Shortage Penggera: Illuminates when the humidifier water tank is low.

4. Persediaan

1. Buka bungkusan Unit: Carefully remove the air purifier and humidifier from its packaging. Remove any protective films or tapes.


Figure 3: Unit placement in a living room. The image shows the unit placed in a living room environment, demonstrating its compact design.

2. Keluarkan Pembungkusan Penapis:
   • Locate the filter compartment cover on the side of the air purifier base.
   • Open the cover and remove the air filter, which is typically sealed in a plastic bag.
   • Keluarkan pembungkusan plastik daripada penapis.


Figure 4: Filter installation. This image shows a hand inserting the air filter into the unit's compartment.

3. Pasang Penapis: Insert the unwrapped filter back into the compartment, ensuring it is seated correctly. Close the filter compartment cover securely.
4. Letakkan Unit: Position the appliance on a firm, level surface, ensuring adequate space around it for proper air circulation (at least 6 inches from walls or furniture).
5. Fill Water Tank (for Humidification):
   • Remove the top cover of the humidifier tank.
   • Pour clean, distilled water directly into the tank. Do not exceed the maximum fill line.
   • Gantikan penutup atas dengan selamat.
6. Sambungkan Kuasa: Palamkan kord kuasa ke salur keluar elektrik yang sesuai.

5. Operasi

5.1 Hidupkan/Mati Kuasa

• Sentuh pada HIDUP/MATI button to turn the unit on. The display will illuminate, and the air purification function will start.
• Sentuh pada HIDUP/MATI butang sekali lagi untuk mematikan unit.

5.2 Air Purification

The unit features a 3-stage sistem penapisan:

• Pra-penapis: Captures large particles like dust, lint, and pet hair.
• Penapis HEPA H13: Traps 99.98% of airborne contaminants as small as 0.3 microns, including pollen, dust mites, and smoke particles.
• Penapis Karbon Teraktif: Absorbs odors, pet dander, and volatile organic compounds (VOCs).

Rajah 5: 3-Stage Filtration System. This image visually explains the layers of the pre-filter, H13 HEPA filter, and activated carbon filter.

5.3 Pelarasan Kelajuan Kipas

• Sentuh pada Kelajuan button repeatedly to cycle through different fan speed settings (e.g., Low, Medium, High).
• Higher speeds provide faster air purification but may result in increased noise levels.

5.4 Humidification Function

• Sentuh pada Pelembapan button to activate the humidification function.
• Touch the button again to adjust the mist output level or turn off humidification.
• The unit will automatically stop humidifying if the water level is too low, and the Water Shortage Alarm will illuminate.

5.5 Smart Auto Mode

The unit is equipped with a VOC sensor and a humidity sensor to automatically adjust operation based on environmental conditions.

Figure 6: Auto Mode Operation. This image shows the unit's display indicating air quality levels (A01, A02, A03) and the VOC sensor.

• In Auto Mode, the fan speed will adjust automatically based on detected air quality (VOC levels).
• The built-in humidity sensor helps maintain balanced moisture levels by adjusting humidification output.
• The AQI light changes color to indicate current air quality:
  • Hijau: Kualiti udara yang baik
  • Yellow: Moderate air quality
  • Merah: Kualiti udara buruk

5.6 Mod Malam

For undisturbed sleep, activate Night Mode.

Figure 7: Night Mode. The image depicts the unit operating quietly in a bedroom setting, highlighting its low noise level (23dB) and dimmable display.

• Sentuh pada Cahaya Malam button to dim the display lights and reduce fan speed to its lowest, quietest setting (approximately 23dB).
• This mode ensures minimal disturbance during sleep while continuing air purification and humidification.

5.7 Fungsi Pemasa

• Sentuh pada Pemasa button to set the desired operating duration (e.g., 1, 2, 4, 8 hours).
• Unit akan dimatikan secara automatik selepas masa yang ditetapkan telah berlalu.

6. Penyelenggaraan

Penyelenggaraan tetap memastikan prestasi optimum dan memanjangkan jangka hayat perkakas anda.

6.1 Penggantian Penapis Udara

The air filter should be replaced approximately every six months, depending on usage and air quality. The Replacing Filter Alarm will illuminate when replacement is due.

1. Cabut plag perkakas daripada salur keluar kuasa.
2. Buka penutup petak penapis.
3. Keluarkan penapis lama dan buang dengan betul.
4. Insert a new Electactic AP4416-UL replacement filter (ensure it is unwrapped).
5. Tutup penutup petak penapis dengan selamat.
6. Plug in the appliance. Press and hold the "Replacing Filter Alarm" button (or corresponding reset button) for 3-5 seconds to reset the filter life indicator.

Note: Replacement filters can be purchased from authorized Electactic retailers or the official webtapak.

6.2 Humidifier Tank Cleaning

Clean the humidifier tank regularly to prevent mineral buildup and bacterial growth.

1. Cabut plag perkakas.
2. Remove the humidifier tank from the unit.
3. Kosongkan sebarang air yang tinggal.
4. Wipe the inside of the tank with a soft cloth and mild detergent. For stubborn mineral deposits, use a solution of white vinegar and water, let it soak, then rinse thoroughly.
5. Rinse the tank thoroughly with clean water to remove all detergent or vinegar residue.
6. Dry the tank before refilling and placing it back on the unit.

6.3 Pembersihan Luaran

• Lap permukaan luar unit dengan kain lembut,amp kain.
• Jangan gunakan pembersih atau pelarut yang melelas.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

Electactic provides a limited warranty for this product. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, replacement parts, or general inquiries, please contact Electactic customer service through the official weblaman web atau peruncit anda.

Untuk maklumat lanjut, lawati Electactic Store on Amazon.