Produk Selesaiview
This document provides instructions for the Generic Articulated Capybara Figurine, Model MMM-CPBRA-BRWN. This 3D printed collectible is designed for display and interactive posing, offering a tactile experience for users aged 15 and above.

Image 1.1: The Articulated Capybara Figurine. This image displays the figurine in a typical pose, highlighting its articulated joints and textured finish.
The figurine features fully articulated limbs, allowing for various poses. Its textured surface is intended to provide a lifelike feel. It is manufactured by 3DCENTRAL SOLUTIONS in Quebec, Canada, using 3D printing technology.
Persediaan
The Articulated Capybara Figurine is ready for use directly out of its packaging. No assembly or battery installation is required.
- Carefully remove the figurine from its packaging.
- Place the figurine on a stable, flat surface for display.
Arahan Operasi
The primary function of this figurine is interactive posing and display. It is intended for users aged 15 and above.
- Posing the Figurine: The capybara features articulated joints in its legs. Gently manipulate each limb to achieve desired poses. Avoid excessive force to prevent damage to the joints or material.
- Tactile Interaction: The figurine can be used as a tactile fidget item. The articulated movement provides a satisfying sensation.
- paparan: Position the figurine on a desk, shelf, or any suitable surface as a decorative item.
Nota: This product is not a toy for young children due to small parts and potential for breakage under rough handling. It is designed as a collectible and stress-relief item for mature users.
Penyelenggaraan
Proper care will ensure the longevity of your Articulated Capybara Figurine.
- Pembersihan: To clean the figurine, gently wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or harsh chemicals, as these may damage the 3D printed material.
- Storan: Store the figurine in a cool, dry place away from direct sunlight and extreme temperatures, which can affect 3D printed plastics.
- Pengendalian: Always handle the figurine by its main body. Avoid pulling or twisting individual limbs with excessive force.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Limb feels stiff or difficult to move. | Minor friction in the joint. | Gently manipulate the limb back and forth to loosen the joint. Do not force movement. |
| A limb or part has broken. | Excessive force applied during posing or accidental impact. | Depending on the break, a suitable adhesive for plastics may be used for repair. For significant damage, contact the manufacturer for potential solutions. |
| Surface appears discolored or faded. | Pendedahan berpanjangan kepada cahaya matahari langsung atau bahan kimia yang keras. | Ensure the figurine is stored away from direct sunlight and avoid using harsh cleaning agents. Discoloration due to prolonged exposure may be irreversible. |
Spesifikasi
- Nombor Model: MMM-CPBRA-BRWN
- Dimensi Produk: 3.15 x 3.15 x 3.15 inci (anggaran)
- Berat Barang: 3.17 auns (anggaran)
- Pengeluar: 3DCENTRAL SOLUTIONS
- Bahan: 3D Printed Plastic
- Umur Disyorkan: 15+
- Tarikh Mula-mula Tersedia: 18 Januari 2025
Waranti dan Sokongan
Specific warranty information for the Generic Articulated Capybara Figurine is not provided in the product data. For inquiries regarding warranty, product support, or replacement parts, please contact the manufacturer, 3DCENTRAL SOLUTIONS, directly.
Manufacturer: 3DCENTRAL SOLUTIONS
Sila rujuk pembungkusan produk atau maklumat peruncit website for the most current contact information for 3DCENTRAL SOLUTIONS.





