1. Pengenalan
This manual provides comprehensive instructions for the installation, operation, and programming of your DieseRC Wireless Roller Shutter Remote Control Switch. This device is designed to wirelessly control AC motors, enabling forward, reverse, and stop functions for applications such as garage doors, electric gates, and roller shutters. Please read this manual carefully before use to ensure proper functionality and safety.
2. Kandungan Pakej
- 1 x Relay Receiver Board
- 2 x Transmitters (battery included)
- 1 x Manual Produk
3. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Penerima Voltage | AC 90V~250V |
| Arus Senyap | <10 mA |
| Maks. semasa | 3A (Inductive Load), 10A (Resistive Load) |
| Kekerapan RF | 433MHz |
| Suhu Operasi | -30°C hingga +80°C |
| Menerima Sensitiviti | > 97 dBm |
| Number of Storable Remotes | Sehingga 20 |
| Sokongan Pengekodan | 1527 Learning-Code |
| RF Operating Mode | ASK Superheterodyne Wireless Reception |
| Julat Penerimaan | Approx. 20 ~ 50 meters (open area) |
| Mod Pengendalian | Momentary / Toggle / Latched Mode |
| Bateri Pemancar | 2 x CR2016 (termasuk) |
| Peranti Serasi | Garage door, electric curtain, electric gate, roller door |
4. Persediaan
4.1 Langkah Keselamatan
- Ensure power is disconnected before any wiring.
- Wiring should be performed by a qualified electrician if you are unsure.
- Verify correct polarity (Live, Neutral) to avoid damage or short circuits.
4.2 Wiring the Receiver
Connect the receiver to your AC motor and power supply according to the diagram below. The receiver supports AC 90V-250V input. Ensure secure connections for all wires.
Image: Receiver dimensions and wiring diagram. Note the 'Up' and 'Down' motor connections and AC 90-250V power input.
The receiver features large screw ports for easy installation and metal clips for secure wiring. A transparent flip cover allows for circuit adjustment.
Imej: Terperinci view of the receiver's screw terminals and cable compatibility.
4.3 Kuasa Permulaan
After wiring, apply power to the receiver. The indicator light on the receiver will illuminate, indicating it is ready for operation or programming.
4.4 Produk Selesaiview Video
Video: Video ini memberikan gambaran keseluruhanview of the DieseRC 2201COM receiver and KT03 remote control, highlighting their design and features.
5. Mod Operasi
The DieseRC remote control switch supports three main operating modes: Momentary, Toggle, and Latched. All products are set to Toggle mode before shipment. If you wish to change the operating mode, you must first reset the receiver (see Section 6.2).
Image: Visual representation of Momentary, Toggle, Latched, and Delay operating modes.
5.1 Momentary Mode
- Tekan dan tahan "▲" button: The motor rotates forward.
- Release the button: The motor stops.
5.2 Mod Togol
- Tekan butang "▲" button once: The motor rotates forward.
- Tekan butang "▲" button again: The motor stops.
5.3 Latched Mode
- Tekan butang "▲" button: The motor rotates forward.
- Tekan butang "▼" button: The motor rotates backward.
- Tekan butang "■" button: The motor stops.
5.4 Permohonan Cthamples
Imej: Cthample of the remote control switch used for a garage door.
Video: This video demonstrates various applications of the DieseRC Wireless Roller Shutter Remote Control Switch, showcasing its functionality in controlling different types of AC motors.
6. Pengaturcaraan Alat Kawalan Jauh
The receiver can store up to 20 transmitters. Follow these steps to program your remote control to the desired operating mode.
Image: Step-by-step programming instructions for different modes.
6.1 Learning a Remote Control
- Press the learning button on the receiver:
- Tekan 1 kali for Momentary Mode.
- Tekan 2 kali for Toggle Mode.
- Tekan 3 kali for Latched Mode.
- Tekan butang "▲" button on your remote control. Wait 3 seconds.
- Tekan butang "▼" button on your remote control. The programming is successful.
Note: For Latched Mode, the remote control requires 3 keys (Forward, Reverse, Stop).
6.2 Resetting the Receiver
To clear all programmed remote controls from the receiver's memory:
- Press the learning button on the receiver 8 kali.
Important: After resetting, all previously programmed remote controls will no longer work and must be re-programmed.
6.3 Video Demonstrasi Pengaturcaraan
Video: A step-by-step video guide on how to program the DieseRC 2201COM receiver, covering the different operating modes and remote control pairing.
7. Penyelenggaraan
7.1 Penggantian Bateri Pemancar
The remote control transmitters use 2 x CR2016 batteries. If the remote's range decreases or it becomes unresponsive, replace the batteries. Refer to the transmitter image for visual guidance.
Image: DieseRC remote control transmitter.
7.2 Pembersihan
Wipe the receiver and transmitters with a dry, soft cloth. Do not use abrasive cleaners or solvents.
7.3 Keadaan Persekitaran
Avoid exposing the device to extreme temperatures, high humidity, or direct sunlight. Ensure the receiver is installed in a location with adequate ventilation.
8. Penyelesaian masalah
- Alat kawalan jauh tidak bertindak balas:
- Check the battery in the transmitter. Replace if necessary.
- Ensure the receiver has power.
- If the receiver was recently reset, re-program the remote control (see Section 6.1).
- Ensure the remote is within the effective operating range (20-50 meters).
- Motor tidak bergerak:
- Sahkan semua sambungan pendawaian adalah selamat dan betul (rujuk Bahagian 4.2).
- Check the power supply to the receiver and motor.
- Ensure the motor itself is functioning correctly.
- Gangguan:
- While multiple remote control sets can be used in the same area without interference (except in Momentary mode), strong local RF interference might affect performance. Try relocating the receiver if possible.
9. Waranti dan Sokongan
DieseRC products are manufactured to high-quality standards. For specific warranty information, please refer to the product packaging or contact your retailer. If you encounter any issues or require technical assistance, please reach out to DieseRC customer support through the vendor's contact information provided at the point of purchase.