1. Pengenalan
This manual provides detailed instructions for the installation and operation of the BOTSLAB Hardwire Kit, specifically designed for the BOTSLAB G980H Dash Cam with a Type-C port. This kit enables advanced parking monitoring features and ensures continuous power supply to your dash cam while protecting your vehicle's battery.
2. Kandungan Pakej
Sahkan bahawa semua item yang disenaraikan di bawah terdapat di dalam pakej anda.
Imej: Kandungan Pakej. This image displays the contents of the box, including the Hardwire Kit and the User Guide.
- Kit Wayar Keras x 1
- Panduan Pengguna x 1
3. Produk Lebihview
The BOTSLAB Hardwire Kit provides a stable power connection for your dash cam, enabling parking surveillance and protecting your vehicle's battery from discharge.
Image: Hardwire Kit Components. This diagram illustrates the main parts of the hardwire kit: the Type-C connector for the dash cam, the power conversion box, and the three color-coded wires (yellow for ACC, red for VCC+, black for GND-).
- Penyambung Jenis-C: Connects to the BOTSLAB G980H Dash Cam.
- Kotak Penukaran Kuasa: Mengawal voltage and protects against battery drain.
- Wayar Kuning (ACC): Menyambung kepada sumber kuasa Aksesori (bersuis).
- Wayar Merah (VCC+): Menyambung kepada sumber kuasa Malar (sentiasa hidup).
- Wayar Hitam (GND-): Connects to a vehicle ground point.
Image: G980H Dash Cam with Hardwire Kit. This image shows the BOTSLAB G980H Dash Cam connected to the 9-foot (2.7-meter) long hardwire cable, highlighting its compatibility with various car models.
4. Ciri-ciri Utama
- Perlindungan Tempat Letak Kereta Selamat: Provides up to 24 hours of surveillance with time-lapse recording or collision-triggered normal recording when parked.
- Pencegahan Kehabisan Bateri: Features under-voltage protection to prevent your car battery from discharging below a safe level.
- Keserasian Luas: The 2.7-meter (9-foot) cable is compatible with most vehicle types for versatile installation.
- Standard Keselamatan: Meets relevant safety standards and certifications for reliable operation.
Image: Secure Parking Protection. This image illustrates the dash cam's parking mode functionality, showing a scenario where a vehicle is monitored, with options for time-lapse or collision-triggered recording.
Image: Battery Drain Prevention. This graphic displays the voltage specifications of the hardwire kit, including an input range of DC 12V-30V and an output of 5V/2.4A, ensuring the car battery is protected from excessive discharge.
5. Panduan Pemasangan
Follow these steps for a proper installation of your BOTSLAB Hardwire Kit. Professional installation is recommended if you are unsure about any steps.
Image: Easy Installation Steps. This image provides a visual guide for the three main installation steps: testing power sources in the fuse box, connecting the ACC, VCC+, and GND- wires, and finally connecting the Type-C cable to the dash cam.
- Langkah 1: Uji Sumber Kuasa
Use a multimeter to identify a 12V constant power source (always-on) and an ACC power source (switched with ignition) in your car's fuse box.
- Langkah 2: Sediakan Wayar
- Sambungkan Wayar Kuning (ACC) to the identified ACC power source.
- Sambungkan Wayar Merah (VCC+) to the identified constant power source.
- Sambungkan Wayar Hitam (GND-) to a suitable grounding point on the vehicle chassis.
- Langkah 3: Sambungkan Kamera Dash
Attach the Type-C connector of the hardwire kit to the Type-C port on your BOTSLAB G980H Dash Cam.
Route the cables neatly along the vehicle's interior trim to conceal them and ensure they do not interfere with driving controls.
6. Operasi
Once installed, the hardwire kit automatically manages power to your dash cam based on your vehicle's ignition status.
Mod Memandu
When your vehicle's ignition is on, the dash cam will receive constant power and operate in normal recording mode, capturing continuous footage.
Mod Letak Kereta
When your vehicle's ignition is turned off, the hardwire kit will switch the dash cam into parking mode. In this mode, the dash cam can perform:
- Rakaman Selang Masa: Continuously records at a low frame rate to save storage space and provide extended surveillance.
- Collision-Triggered Recording: Automatically records normal video footage when a significant impact or motion is detected, ensuring critical events are captured.
Vol bawahtage protection feature will monitor your car battery's voltage and automatically cut power to the dash cam if the voltage drops below a safe threshold, preventing battery depletion.
7. Penyelenggaraan
The BOTSLAB Hardwire Kit requires minimal maintenance. Ensure all connections remain secure and free from corrosion. Periodically check the cable routing to ensure it is not pinched or damaged.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Dash cam tidak dihidupkan. | Incorrect wiring; Blown fuse; Low car battery voltage. |
|
| Mod parkir tidak diaktifkan. | ACC wire not correctly connected; Dash cam settings. |
|
| Bateri kereta cepat habis. | Di bawah voltage protection not functioning; Excessive parking mode duration. |
|
9. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | BOTSLAB |
| Nama Model | G980H |
| Input Voltage Julat | DC 12V-30V |
| Keluaran Voltage / Semasa | 5V / 2.4A |
| Panjang Kabel | 2.7 meter (9 kaki) |
| Jenis Penyambung | USB Jenis-C |
| Ciri Khas | Parking Monitor, Under-Voltage Perlindungan |
| Jenis Kenderaan Serasi | Kereta, Lori, Van |
| Dimensi Produk (D x W x H) | 6.8 x 18 x 3.8 cm |
10. Waranti dan Sokongan
Untuk maklumat jaminan dan sokongan teknikal, sila rujuk BOTSLAB rasmi webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda untuk tuntutan waranti.
rasmi Webtapak: www.botslab.com (Nota: Ini ialah pemegang tempat URL. Please refer to your product packaging or official documentation for the correct support contact information.)