hofstein Ripoll 3-Light Pendant Lamp

1. Pengenalan

This manual provides essential instructions for the safe installation, operation, and maintenance of your hofstein Ripoll 3-Light Pendant Lamp. Please read this manual thoroughly before installation and retain it for future reference. This pendant lamp features three glass shades in varying sizes (20 cm, 25 cm, 30 cm diameter) and colors (blue, gold, green), designed for indoor use in dining rooms, kitchens, hallways, bedrooms, or living rooms.

Image 1.1: The hofstein Ripoll 3-Light Pendant Lamp with its three distinct glass shades.

2. Arahan Keselamatan

WARNING: Risk of electric shock. Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.

• Installation must be performed by a qualified electrician or a person with electrical knowledge.
• Pastikan permukaan pelekap boleh menyokong berat lekapan.
• Jangan sambungkan lekapan kepada sistem elektrik yang tidak dibumikan.
• Gunakan hanya mentol E27 dengan wat maksimumtage sebanyak 15W setiap soket.
• Jangan sentuh mentol atau lekapan dengan segera selepas digunakan, kerana ia mungkin panas.
• This product is designed for indoor use only (IP20 rating). Do not expose to moisture or extreme temperatures.
• Jauhkan bahan pembungkus daripada kanak-kanak.

3. Kandungan Pakej

Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, do not proceed with installation and contact customer support.

Imej 3.1: Semua komponen termasuk dalam pakej.

Pakej harus mengandungi:

• 1x Ceiling canopy (Ø 30 cm, H 2.5 cm) with pre-wired sockets
• 3x Pendant cables with lamp pemegang
• 1x Glass shade (Ø 20 cm)
• 1x Glass shade (Ø 25 cm)
• 1x Glass shade (Ø 30 cm)
• 1x Mounting bracket (approx. 27 cm)
• Mounting hardware (screws, wall plugs, cable clamps)
• Manual arahan (dokumen ini)

Note: E27 bulbs are not included and must be purchased separately.

4. Persediaan dan Pemasangan

Before beginning installation, ensure the power supply is turned off at the circuit breaker. It is recommended to have a second person assist with the installation.

4.1 Alat Diperlukan (Tidak Termasuk)

• Pemutar skru (kepala Phillips)
• latih tubi
• Pensel
• Strippers wayar
• Voltage penguji
• Tangga

4.2 Langkah Pemasangan

1. Matikan Kuasa: Locate the circuit breaker controlling the light fixture's power supply and turn it off. Verify power is off using a voltage penguji.
2. Sediakan Permukaan Pemasangan: Remove any existing light fixture. Use the mounting bracket as a template to mark the drilling points on the ceiling.
3. Pasang Pendakap Pelekap: Drill holes at the marked points. Insert wall plugs (if necessary) and secure the mounting bracket to the ceiling using the provided screws.
4. Pendawaian: Connect the fixture's wires to your household electrical wires. Typically, this involves connecting:
   • Live (L) wire from fixture to Live (L) wire from ceiling.
   • Neutral (N) wire from fixture to Neutral (N) wire from ceiling.
   • Ground (E) wire from fixture to Ground (E) wire from ceiling.
   Ensure all connections are secure using wire nuts or terminal blocks.
5. Attach Ceiling Canopy: Carefully push the wired canopy up to the ceiling, aligning the holes in the canopy with the mounting bracket. Secure the canopy to the bracket using the provided screws.
6. Laraskan Panjang Loket: The pendant cables can be adjusted in length during installation. Loosen the cable clamps inside the canopy, adjust each cable to your desired height (maximum 125 cm), and then tighten the clampdengan selamat.
7. Pasang Lorek Kaca: Carefully attach each glass shade to its respective lamp holder. Ensure they are securely fastened.
8. Masukkan Mentol: Screw E27 bulbs (not included, max 15W each) into the lamp pemegang.
9. Pulihkan Kuasa: Setelah pemasangan selesai dan semua sambungan kukuh, hidupkan semula kuasa pada pemutus litar.

Imej 4.1: Dimensi lebihview and installation reference.

Imej 4.2: Terperinci view of the ceiling canopy and wiring connections.

5. Arahan Operasi

The hofstein Ripoll pendant lamp is operated via your standard wall light switch. There is no integrated on/off switch on the fixture itself.

• Hidupkan/Mati Kuasa: Flip the wall switch to turn the light fixture on or off.
• Peredupan: This fixture is dimmable, but requires an external dimmer switch (not included) to be installed in your electrical system. Ensure any dimmer used is compatible with E27 incandescent or dimmable LED bulbs.
• Jenis Mentol: Use E27 base bulbs. The maximum wattage per bulb is 15 Watts.

6. Penyelenggaraan

6.1 Pembersihan

To maintain the appearance of your pendant lamp:

• Always turn off the power and allow the fixture to cool before cleaning.
• Lap bahagian logam dengan kain lembut dan kering.
• Clean the glass shades with a soft, damp cloth and a mild glass cleaner if necessary. Avoid abrasive cleaners or solvents.
• Pastikan lekapan benar-benar kering sebelum memulihkan kuasa.

6.2 Penggantian Mentol

When a bulb needs to be replaced:

• Matikan kuasa pada pemutus litar.
• Allow the old bulb to cool completely.
• Carefully unscrew the old E27 bulb from its socket.
• Screw in a new E27 bulb, ensuring it does not exceed 15 Watts.
• Pulihkan kuasa.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

For information regarding warranty coverage and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

For technical assistance or inquiries, please visit the hofstein brand store or contact their customer service directly.