1. Produk Lebihview
The FULEN WL04 Motion Sensor Wall Light is a versatile, rechargeable LED sconce designed for indoor use. It features smart motion sensing, remote control operation, adjustable brightness, and three color temperature options to enhance any living space.
Ciri-ciri Utama:
- Penderia Gerakan Pintar: Automatically illuminates when motion is detected in dark environments, turning off after 30 seconds of inactivity.
- Large Capacity 5000mAh Rechargeable Battery: Provides extended operation, up to 10 hours at maximum brightness or 60 days in motion sensor mode.
- Alat Kawalan Jauh yang Mudah: Adjust settings from up to 22 feet away, including power, mode, brightness, and color temperature.
- 3 Color Temperatures & Adjustable Brightness: Choose between Cold White, Natural White, and Warm White, with 5 brightness levels up to 300 lumens.
- Pemasangan Mudah: Offers two installation methods: adhesive stickers for smooth surfaces or expansion screws for a more permanent fixture.

2. Persediaan dan Pemasangan
The FULEN WL04 wall light offers flexible installation options to suit your needs. Ensure the mounting surface is clean and dry before installation.
Kaedah Pemasangan:
- Adhesive Sticker Installation (for smooth walls):
- Peel off the protective film from the adhesive sticker on the back of the mounting base.
- Firmly press the base onto the desired smooth wall surface. Ensure the 'UP' arrow on the base points upwards.
- Align the wall light with the mounted base and slide it down until it clicks securely into place.
- Screw Installation (for all wall types):
- Mark the desired installation location on the wall.
- Drill two holes at the marked points, matching the screw holes on the mounting base.
- Masukkan skru pengembangan yang disediakan ke dalam lubang yang telah digerudi.
- Secure the mounting base to the wall using the screws. Ensure the 'UP' arrow on the base points upwards.
- Align the wall light with the mounted base and slide it down until it clicks securely into place.

3. Arahan Operasi
The FULEN WL04 wall light can be operated using its integrated buttons or the included remote control.
Menggunakan Alat Kawalan Jauh:
The infrared remote control allows you to manage the light's functions from up to 22 feet away. (Requires two AAA batteries, not included for the remote control).
- Butang Kuasa: Turns the light On or Off.
- Pelarasan Kecerahan: Use the '+' and '-' buttons to cycle through 5 brightness levels.
- Pemilihan Suhu Warna: Press the color temperature button to switch between Cold White (6000K), Natural White (4500K), and Warm White (3000K).
- Fungsi Pemasa: Set the light to automatically turn off after 10 or 30 minutes.
- Pemilihan Mod:
- 'On' Mode: Keeps the light continuously on.
- 'Auto' Mode (Motion Sensor): The light will automatically turn on when motion is detected in a dark environment and turn off after 30 seconds of no activity.

Manual Operation (On-device buttons):
The light also features buttons on its base for basic control:
- Power/Mode Switch: A slider switch to select ON, AUTO, or OFF modes.
- Butang Suhu Warna: Press to cycle through the three color temperatures.
- Butang Kecerahan: Tekan lama untuk melaraskan tahap kecerahan.

4. Pengecasan dan Hayat Bateri
The FULEN WL04 is equipped with a high-capacity rechargeable battery for cordless convenience.
- mengecas: Use the provided USB-C charging cable to recharge the internal 5000mAh battery. A full charge typically takes approximately 5 hours.
- Penunjuk Bateri: The light features an indicator to show charging status (e.g., red for charging, green for fully charged).
- Hayat Bateri: Enjoy up to 10 hours of continuous lighting at maximum brightness, or up to 60 days when operating in motion sensor mode.

5. Penyelenggaraan
To ensure optimal performance and longevity of your FULEN WL04 wall light, follow these simple maintenance guidelines:
- Pembersihan: Wipe the surface of the light with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.
- Penjagaan Bateri: For best battery life, avoid completely draining the battery frequently. Recharge the light when the battery indicator suggests it is low. If storing for an extended period, charge the battery to about 50% and recharge every few months.
- Penyelenggaraan Sensor: Keep the motion sensor lens clean and free from dust or obstructions to ensure accurate detection.
6. Penyelesaian masalah
If you encounter any issues with your FULEN WL04 wall light, refer to the following common troubleshooting steps:
- Lampu Tidak Dihidupkan:
- Periksa sama ada bateri telah dicas. Isi semula jika perlu.
- Ensure the mode switch is set to 'On' or 'Auto'.
- If in 'Auto' mode, verify the environment is dark enough and motion is within the sensor's range (approx. 11 feet, 120° wide-angle).
- Penderia Gerakan Tidak Berfungsi:
- Confirm the light is in 'Auto' mode.
- Pastikan kanta penderia bersih dan tidak terhalang.
- Test in a completely dark environment, as the sensor may not activate in well-lit conditions.
- Alat Kawalan Jauh Tidak Menjawab:
- Periksa dan gantikan bateri AAA pada alat kawalan jauh.
- Ensure there are no obstructions between the remote and the light's infrared receiver.
- Make sure you are within the effective range (6-7 meters / 22 feet).
- Cahaya Berkelip atau Malap Secara Tidak Dijangka:
- The battery may be low. Recharge the light fully.
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | FULEN |
| Nama Model | WL04 |
| warna | putih |
| bahan | Akrilonitril Butadiena Stirena |
| Dimensi Produk | 3.9"L x 3.4"W x 2"H |
| Sumber Kuasa | Dikuasakan Bateri (5000mAh Boleh Dicas Semula) |
| Jenis Sumber Cahaya | LED |
| Kecerahan | 300 Lumen (Maks) |
| Suhu Warna | 3000K (Putih Hangat), 4500K (Putih Asli), 6000K (Putih Sejuk) |
| Ciri Khas | Color Changing, Dimmable, Energy Efficient, Motion Sensor, Timer |
| Kaedah Kawalan | Remote, Manual Buttons |
| Jenis Pemasangan | Surface Mount (Adhesive or Screws) |
| Penggunaan Dalaman/Luar | Dalaman |
| Komponen yang Disertakan | Motion Sensor Wall Light, Remote Control, Charging Cable |
8. Waranti dan Sokongan
FULEN is committed to providing high-quality products and excellent customer service. Your WL04 Motion Sensor Wall Light comes with an extended warranty.
If you have any questions about your product, require assistance with setup or operation, or experience any quality issues, please do not hesitate to contact the FULEN support team. We aim to respond and resolve your concerns within 24 hours to ensure your complete satisfaction.
For support, please refer to the contact information provided with your product packaging or visit the official FULEN webtapak.