1. Arahan Keselamatan
Baca semua arahan dengan teliti sebelum pemasangan dan penggunaan. Simpan manual ini untuk rujukan pada masa hadapan.
- Pastikan semua komponen ada dan tidak rosak sebelum dipasang.
- Assemble the table on a clean, flat, and stable surface to prevent scratching or damage.
- Do not exceed the maximum load capacity of 700 lbs (317.5 kg) for the entire table. The upper shelf supports up to 400 lbs, and the lower shelf supports up to 300 lbs.
- Distribute weight evenly across the table surfaces.
- Always lock the swivel casters when the table is in a stationary position to prevent accidental movement.
- Keep hands and fingers clear of moving parts during assembly and when adjusting the shelf height.
- Regularly inspect the table for loose bolts or signs of wear. Tighten bolts as needed.
- Do not use abrasive cleaners or harsh chemicals on the stainless steel surface, as this may cause damage.
2. Kandungan Pakej
Sahkan bahawa semua komponen berikut disertakan dalam pakej anda:
- 1 x Stainless Steel Tabletop
- 1 x Stainless Steel Undershelf
- 4 x Stainless Steel Legs
- 4 x Swivel Casters (2 with locking brakes)
- 4 x Triangular Plates
- 12 x Hexagon Socket Bolts M8*16mm
- 4 x M8 Kacang
- 1 x Hex Wrench (for bolts)
3. Arahan Persediaan dan Pemasangan
Follow these steps to assemble your Happybuy Stainless Steel Work Table:
- Buka Pembungkusan Komponen: Keluarkan semua bahagian dari bungkusan dengan berhati-hati dan letakkannya di atas permukaan yang bersih dan lembut untuk mengelakkan calar.
- Pasang Kaki ke Atas Meja:
Position the tabletop upside down. Insert the top end of each leg into the corner sockets on the underside of the tabletop. Secure each leg using the triangular plates and M8*16mm hexagon socket bolts. Ensure the bolts are tightened firmly with the provided hex wrench.
Image: Detail of leg attachment with triangular plate for enhanced stability.
- Install Undershelf:
Slide the undershelf onto the legs. The undershelf has pre-drilled holes that align with the adjustment points on the legs. Secure the undershelf at your desired height using the remaining M8*16mm hexagon socket bolts and M8 nuts. Ensure all bolts are securely fastened.
Image: Illustration of the adjustable bottom shelf, demonstrating height customization.
- Lampirkan Kastor:
Screw the four swivel casters into the bottom of each leg. Ensure that the two casters with locking brakes are installed on the same side for easier access and control.
Image: Detail of a flexible wheel with a top brake upgrade for stability and safety.
- Semakan Akhir: Once assembled, carefully turn the table upright. Ensure all bolts are tight and the table is stable. Lock the brakes on the casters before placing any items on the table.
4. Ciri-ciri Utama
- Pembinaan Keluli Tahan Karat Berkualiti Tinggi: Made from SUS201 stainless steel for the top, shelves, and legs, offering excellent rust resistance and an easy-to-clean surface.
- Kapasiti Beban Teguh: The upper shelf can support up to 400 lbs (181 kg), and the lower shelf up to 300 lbs (136 kg), with a total table capacity of 700 lbs (317.5 kg).
- Adjustable Undershelf: Features three adjustable shelf levels, allowing customization of height to accommodate various items and storage needs.
- Mobile Design with Locking Casters: Equipped with four durable swivel casters for easy movement, two of which include locking brakes to ensure stability when stationary.
- Aplikasi Serbaguna: Suitable for a wide range of environments including commercial kitchens, bars, restaurants, catering events, schools, and home use.
Image: The work table in a kitchen environment, demonstrating its utility with a microwave and other items.
Image: Illustration of the table's large storage capacity and stability, with indicated weight limits for each shelf.
5. Arahan Operasi
- Menggerakkan Meja: To move the table, unlock the brakes on the two locking casters. Gently push or pull the table to its desired location.
- Mengamankan Meja: Once the table is in position, press down on the levers of the two locking casters to engage the brakes. This will prevent the table from moving unintentionally.
- Melaraskan Ketinggian Rak: To adjust the height of the undershelf, carefully remove the items from the shelf. Loosen the bolts securing the shelf to the legs, reposition the shelf to one of the three available height levels, and then re-tighten the bolts securely. Ensure the shelf is level before placing items back on it.
- Pengagihan Berat: Always distribute weight evenly across the tabletop and undershelf to maintain stability and prevent tipping. Do not concentrate heavy loads in one small area.
6. Penyelenggaraan dan Pembersihan
Proper maintenance ensures the longevity and hygiene of your stainless steel work table.
- Pembersihan Harian: Wipe down all stainless steel surfaces with a soft cloth dampened with warm water and a mild detergent. Rinse thoroughly with clean water and dry immediately to prevent water spots and streaks.
- Noda degil: For more stubborn stains, use a specialized stainless steel cleaner. Always wipe in the direction of the grain of the stainless steel.
- Elakkan bahan pelelas: Do not use abrasive pads, steel wool, or harsh chemical cleaners (e.g., bleach, ammonia-based cleaners) as these can scratch or damage the stainless steel finish.
- Penyelenggaraan Kastor: Periodically check the casters for debris (hair, lint, etc.) and clean them to ensure smooth movement. Lubricate the swivel mechanisms if they become stiff.
- Bolt Inspection: Regularly check all bolts and fasteners for tightness. Re-tighten any loose bolts to maintain the table's structural integrity and stability.
7. Penyelesaian masalah
Rujuk bahagian ini untuk isu biasa dan penyelesaiannya.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Meja goyah atau tidak stabil. | Loose bolts; uneven floor; casters not locked. | Ensure all assembly bolts are securely tightened. Move the table to a level surface. Lock the brakes on the casters. |
| Casters are difficult to roll. | Debris in caster wheels; casters locked. | Check for and remove any debris (e.g., hair, lint) from the caster wheels. Ensure caster brakes are disengaged. Lubricate swivel mechanisms if necessary. |
| Undershelf is not level. | Bolts not tightened evenly; shelf not seated correctly. | Loosen shelf bolts, adjust the shelf to ensure it is level, and then re-tighten all bolts evenly and securely. |
| Rust spots appear on stainless steel. | Exposure to harsh chemicals; prolonged contact with corrosive materials; improper cleaning. | Clean immediately with a stainless steel cleaner. Avoid using abrasive materials or harsh chemicals. Ensure surfaces are dried after cleaning. |
8. Spesifikasi
Image: Detailed product specifications including dimensions and weight.
- model: GZT61*45*85
- Bahan: SUS201 Stainless Steel (Tabletop, Undershelf, Legs)
- Dimensi Produk (L x W x H): 24 x 18 x 34 inci (610 x 450 x 860 mm)
- Berat produk: 19 paun (8.6 kg)
- Jumlah Kapasiti Muatan: 700 paun (317.5 kg)
- Upper Shelf Load Capacity: 400 paun (181 kg)
- Lower Shelf Load Capacity: 300 paun (136 kg)
- Pelarasan Ketinggian: 3 Levels for undershelf
- Kastor: 4 Swivel Casters (2 with locking brakes)
9. Waranti dan Sokongan Pelanggan
Happybuy products are designed for durability and performance. For warranty information, technical assistance, or any questions regarding your product, please contact Happybuy customer support through the retailer's platform or visit the official Happybuy webtapak.
Please have your model number (GZT61*45*85) and purchase date available when contacting support.