FREESEA Aquarium Wave Maker and Submersible Water Pump Instruction Manual

Arahan Keselamatan Penting

Please read and understand all safety instructions before installing and operating this product. Failure to follow these instructions may result in product damage, injury, or electric shock. Keep this manual for future reference.

• Sentiasa putuskan bekalan elektrik sebelum melakukan sebarang penyelenggaraan atau pemasangan.
• This product is designed for indoor aquarium use only. Do not use it for purposes other than its intended use.
• Ensure the power cord and plug are not damaged. Do not operate if any part is damaged.
• Do not operate the pump or wave maker dry. Ensure they are fully submerged in water during operation.
• Jauhkan kanak-kanak dan haiwan peliharaan daripada produk semasa operasi.
• Pastikan voltage and frequency of your power supply match the specifications of the product.
• Never pull the product by its power cord.
• If the product falls into water, do not reach for it. Disconnect power immediately before retrieving.

Produk Selesaiview

The FREESEA Aquarium Wave Maker and Submersible Water Pump system is designed to enhance water circulation and oxygenation in your aquarium. This package includes two distinct components: an Aquarium Wave Maker for creating natural water flow and a Submersible Water Pump for general water circulation, filtration, and fountain applications.

Ciri-ciri Utama

• Aquarium Wave Maker: Simulates natural ocean currents, stirs debris, and aids in oxygenation. Features 360° rotation and adjustable water flow.
• Pam air tenggelam: Provides powerful suction, capable of pumping water as shallow as 5 mm. Features a 360° omnidirectional filter and intelligent dry run prevention.
• Versatile for various applications including fish tanks, ponds, aquariums, and hydroponic systems.

Kandungan Pakej

• 1 x FREESEA Aquarium Wave Maker
• 1 x FREESEA Submersible Water Pump
• Assorted Nozzles (for Submersible Pump)
• Manual Arahan

Product Components and Dimensions

FREESEA Aquarium Wave Maker

This section details the physical characteristics and dimensions of the Aquarium Wave Maker.

Rajah 1: Aquarium Wave Maker Dimensions. The wave maker measures approximately 122mm in length, with individual pump heads being 61mm wide and 69mm high.

Rajah 2: Dense Filter Cover. The wave maker features a unique water inlet cover design to prevent fish from being inhaled, ensuring safer operation.

FREESEA Submersible Water Pump

This section details the physical characteristics and dimensions of the Submersible Water Pump.

Rajah 3: Submersible Water Pump Dimensions and Nozzles. The pump comes with four nozzle options (1/2", 2/3", 4/5", 1") and has a maximum pumping height of 8.2 feet.

Rajah 4: Submersible Water Pump Features. The pump is designed for 360° water absorption, operates with low noise, features a high-quality motor, and can pump water effectively even at levels as low as 5mm.

Pemasangan

Installing the Aquarium Wave Maker

The wave maker is designed for easy installation using its strong magnetic base.

1. Ensure the aquarium glass is clean and free of algae or debris where the wave maker will be placed.
2. Attach the wave maker to the inside of the aquarium glass. Position the external magnet on the outside of the glass, aligning it with the internal magnet of the wave maker. The strong magnetic force will secure the unit.

Rajah 5: Strong Magnetic Base Installation. Ensure proper alignment of the internal and external magnets for secure attachment. Exercise caution to avoid pinching fingers.

3. Adjust the direction of water flow. The wave maker features 360-degree rotation, allowing you to direct the flow as needed to eliminate dead spots in the aquarium.

Rajah 6: 360-Degree Rotation. The wave maker heads can be rotated to direct water flow in any desired direction.

Installing the Submersible Water Pump

The submersible pump is designed for placement at the bottom of your aquarium or water feature.

1. Select an appropriate nozzle size from the provided options (1/2", 2/3", 4/5", 1") based on your desired water pipe diameter and flow requirements.
2. Attach the chosen nozzle to the water outlet of the pump.
3. Place the pump at the desired location at the bottom of your aquarium or water feature. Ensure it is fully submerged before connecting to power.

Rajah 7: Submersible Pump Placement. The pump should be placed fully submerged at the bottom of the tank for optimal operation.

Operasi

Operating the Aquarium Wave Maker

1. After installation and ensuring the wave maker is fully submerged, plug the power cord into a suitable electrical outlet.
2. The wave maker will begin operating, creating water flow.
3. To adjust the intensity of the water flow, use the water flow switch located on the unit. Slide the switch to increase or decrease the flow as desired.

Rajah 8: Water Flow Switch. Adjust the switch to control the water output from large to small.

Operating the Submersible Water Pump

1. Ensure the pump is fully submerged in water and the desired nozzle is attached.
2. Plug the power cord into a suitable electrical outlet. The pump will begin to circulate water.
3. The pump is designed to operate effectively even at low water levels, down to 5mm, thanks to its 360° water absorption design.

Rajah 9: Low Water Level Pumping. The pump can effectively move water even when the water level is very low.

Penyelenggaraan

Regular maintenance ensures optimal performance and extends the lifespan of your FREESEA products. Always disconnect power before cleaning.

Cleaning the Aquarium Wave Maker

1. Disconnect the wave maker from power and remove it from the aquarium.
2. Carefully detach the dense filter cover (refer to Figure 2).
3. Clean any accumulated algae or debris from the impeller and the filter cover using a soft brush and clean water. Do not use soap or detergents.
4. Rinse all components thoroughly and reassemble.

Cleaning the Submersible Water Pump

1. Disconnect the pump from power and remove it from the water.
2. Disassemble the pump casing and remove the impeller.
3. Clean any debris, slime, or mineral deposits from the impeller, impeller housing, and filter intake using a soft brush and clean water.
4. Rinse all components thoroughly and reassemble.

Menyelesaikan masalah

If you encounter issues with your FREESEA product, refer to the following common problems and solutions.

• Pump/Wave Maker Not Starting:
  • Periksa sama ada kord kuasa dipasang dengan selamat ke soket yang berfungsi.
  • Pastikan ada kuasa pada alur keluar.
  • Inspect the impeller for any obstructions or damage. Clean if necessary.
• Low Water Flow/Weak Current:
  • For the wave maker, check the water flow switch setting (refer to Figure 8).
  • Clean the impeller and filter covers of both units to remove any debris or algae buildup.
  • Ensure the pump/wave maker is fully submerged and the water level is adequate.
• Bunyi Luar Biasa:
  • Disconnect power and check for any foreign objects lodged in the impeller.
  • Ensure the unit is securely mounted and not vibrating against the aquarium glass.
• Submersible Pump Stops Operating (Dry Run Prevention):
  • The submersible pump features intelligent dry run prevention. If the water temperature reaches 80°C due to low water levels or dry operation, the pump will stop.
  • If the temperature drops to 60°C, the pump will resume operation.
  • Ensure adequate water levels to prevent dry running and overheating.

Rajah 10: Intelligent Dry Run Prevention. This feature protects the submersible pump from damage due to insufficient water.

Spesifikasi

FREESEA Aquarium Wave Maker Specifications

FREESEA Submersible Water Pump Specifications

Maklumat Umum Produk