1. Pengenalan
Thank you for choosing the ONIDEK Floor Lamp with Fan. This product combines a versatile LED floor lamp with an integrated fan, offering adjustable lighting, color temperature, RGB options, and fan speeds. It can be controlled via a remote or the integrated buttons on the lamp pole. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
2. Arahan Keselamatan Penting
Please read all safety instructions carefully before use and retain this manual for future reference.
- Sentiasa cabut plag lamp from the power outlet before cleaning, performing maintenance, or moving it.
- Jangan kendalikan lamp with a damaged cord or plug. If the cord or plug is damaged, contact customer support for assistance.
- Jangan dedahkan lamp to water or moisture. Use only in dry indoor environments.
- Keep the fan blades clear of obstructions. Do not insert fingers or other objects into the fan grille.
- Pastikan lamp diletakkan di atas permukaan yang stabil dan rata untuk mengelakkan terbalik.
- Jangan cuba membuka atau membaiki lamp diri sendiri. Rujuk semua servis kepada kakitangan yang berkelayakan.
- Jauhkan daripada kanak-kanak dan haiwan peliharaan.
3. Kandungan Pakej
Pastikan semua komponen berada dalam keadaan baik dan lengkap:
- Tingkat Lamp Assembly (Base, Pole Sections, Lamp Heads with Fans)
- Alat Kawalan Jauh
- Penyesuai Kuasa
- Manual Arahan (dokumen ini)
4. Arahan Perhimpunan
Follow these steps to assemble your ONIDEK Floor Lamp with Fan:
- Sambungkan Tiub: Carefully connect the threaded pole sections (tubes) together by twisting them clockwise until secure. Ensure the internal wiring passes freely through the connections.
- Pull Out Extra Wires: Gently pull any excess internal wiring from the bottom of the lowest pole section to ensure it does not get pinched during base attachment.
- Screw the Tube into the Base: Align the bottom pole section with the lamp base and screw it clockwise until it is firmly attached. Ensure the base is stable.
- Sambungkan Kord Kuasa: Masukkan penyesuai kuasa ke dalam port yang ditetapkan pada lamp pole, then plug the adapter into a standard wall outlet.
Once assembled, ensure all connections are secure and the lamp is stable before operation.
5. Arahan Operasi
Your ONIDEK Floor Lamp with Fan can be controlled using the included remote control or the buttons located on the lamp tiang.
5.1. Fungsi Alat Kawalan Jauh
- Hidupkan/Mati Kuasa: Tekan ke HIDUP/MATI butang untuk memusingkan lamp and fan on or off.
- Pelarasan Cahaya:
- Kecerahan: Gunakan + dan - buttons to adjust brightness from 10% to 100%.
- Suhu Warna: Gunakan 3000K-6000K buttons to cycle through warm white (3000K), neutral white (4500K), and cool white (6000K) settings.
- Mod RGB: Tekan ke RGB button to activate color-changing modes.
- Lampu malam: Tekan ke Lampu malam button for a soft, low-intensity light.
- Pelarasan Kipas: Gunakan Fan Gear Setting buttons to select desired fan speed.
5.2. Button Control on Lamp tiang
Lamp pole features integrated buttons for basic control:
- Pelarasan Kipas: Buttons to increase or decrease fan speed.
- Pelarasan Cahaya: Buttons to adjust light brightness or cycle through color temperatures.
- Pelarasan Cahaya RGB: Button to control RGB lighting modes.
5.3. Pelarasan Leher Angsa
Lamp heads are equipped with flexible goosenecks, allowing for 360° rotation and 180° vertical adjustment. This enables you to direct both the light and fan airflow precisely where needed.
Some models may also feature a touch control area on the lamp head for quick adjustments.
6. Penyelenggaraan
To keep your ONIDEK Floor Lamp with Fan in optimal condition:
- Pembersihan: Sentiasa cabut plag lamp before cleaning. Use a soft, dry cloth to wipe down the lamp pole, base, and lamp heads. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the finish or electrical components.
- Bilah Kipas: Periodically check the fan grilles for dust accumulation. Use a soft brush or compressed air to gently remove dust from the fan blades.
- Storan: Jika menyimpan lamp for an extended period, unplug it and store it in a dry, cool place, protected from dust and moisture.
7. Penyelesaian masalah
Jika anda menghadapi masalah dengan l andaamp, rujuk kepada masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lamp tidak menyala. | Tiada kuasa, sambungan longgar, bateri alat kawalan jauh mati. | Periksa sama ada penyesuai kuasa dipasang dengan kukuh pada kedua-dua lamp and the wall outlet. Ensure the wall outlet is functional. Replace remote control batteries. |
| Kipas tidak beroperasi. | No power, fan speed set to off, obstruction. | Verify power connection. Increase fan speed using remote or pole buttons. Check for any obstructions around the fan blades. |
| Alat kawalan jauh tidak bertindak balas. | Dead batteries, out of range, signal obstruction. | Replace remote control batteries. Ensure you are within range and there are no objects blocking the signal path to the lamp. |
| Cahaya berkelip atau malap tanpa diduga. | Bekalan kuasa tidak stabil, sambungan longgar. | Ensure the power adapter is firmly connected. Try plugging the lamp into a different wall outlet. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | ONIDEK |
| Nombor Model | LDFS |
| Dimensi Produk | 11"D x 11"W x 72"H |
| Lamp taip | Tingkat Lamp |
| Jenis Sumber Cahaya | LED |
| Wattage | 12 watt |
| Suhu Warna | 3000K-6000K (Stepless Adjustable) |
| Kecerahan | 10%-100% Boleh Dimalapkan |
| Pencahayaan RGB | ya |
| Kaedah Kawalan | Remote and Button Control |
| Pelarasan Gooseneck | 360° & 180° Rotation |
| Bahan Asas | Keluli Aloi |
| Bahan Teduh | Keluli Aloi |
| Jenis Bahan | Keluli Karbon |
| warna | Hitam |
| Tanpa wayar | Tidak |
9. Waranti dan Sokongan
9.1. Waranti Pengeluar
This ONIDEK Floor Lamp with Fan is covered by a jaminan pengilang dua tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.
9.2. Sokongan Pelanggan
For warranty claims, technical assistance, or any questions regarding your product, please contact the retailer where you purchased the item or the ONIDEK customer support team. Please have your purchase receipt and model number (LDFS) available when contacting support.
For the most up-to-date contact information, please refer to the product packaging or the official ONIDEK webtapak.