COMOMY 50x50 Inch Baby Playpen Instruction Manual

1. Maklumat Keselamatan Penting

Please read and understand all instructions before assembling and using the COMOMY baby playpen. Failure to follow these instructions could result in serious injury or death.

• Sentiasa awasi anak anda apabila mereka berada di dalam playpen. Jangan sekali-kali meninggalkan anak tanpa pengawasan.
• Ensure all parts are correctly assembled and securely fastened before placing a child inside.
• Do not use the playpen if any parts are missing, damaged, or broken. Contact customer support for replacement parts.
• Keep children away from the playpen during assembly and disassembly.
• The playpen does not include padding at the bottom. An additional play mat is recommended for comfort and safety, especially on hard floors.
• Do not place the playpen near open flames, heaters, or other heat sources.
• Regularly check the playpen for any signs of wear or damage.

2. Kandungan Pakej

Sahkan bahawa semua komponen yang disenaraikan di bawah hadir sebelum memulakan pemasangan:

• 8x 61cm Steel Tubes
• 16x 61cm Foam-Covered Pipes
• 8x T-Tee Connectors
• 4x Three-Rectangular Connectors
• 4x Suction Cup Tee Connectors
• Pemegang 4x
• 1x Playpen Fabric Cover
• 1x Beg Simpanan Mudah Alih

Image: All components of the COMOMY playpen laid out for inspection.

3. Persediaan dan Pemasangan

Follow these steps for quick and easy assembly. No tools are required.

1. Pasang Bingkai Asas: Lay the playpen fabric cover flat on the floor. Connect the 61cm steel tubes using the T-tee connectors and suction cup tee connectors to form the base square. Ensure the suction cups are facing downwards.
2. Install Vertical Pipes: Insert the foam-covered pipes into the vertical sleeves of the fabric cover. Connect these vertical pipes to the base frame using the appropriate connectors.
3. Install Horizontal Pipes: Insert the remaining foam-covered pipes into the horizontal sleeves along the top edge of the fabric cover. Connect these horizontal pipes to the vertical pipes using the remaining T-tee connectors and three-rectangular connectors.
4. Secure Fabric and Padding: Ensure all fabric covers are properly aligned and secured around the frame. Fasten any Velcro straps or ties to keep the padding in place, especially on the corners.
5. Lampirkan Pemegang: Clip the four handles onto the top horizontal pipes as desired, providing support for your child to pull themselves up.

Image: Step-by-step visual instructions for playpen assembly.

4. Arahan Operasi

• Using the Zipper Door: The playpen features an external zipper door for easy access. Unzip the door to allow your child to crawl in and out independently. Always ensure the zipper is fully closed when you need to keep your child safely contained within the playpen.
• Full Mesh Design: The full mesh sides provide excellent visibility, allowing you to easily monitor your child's activities. This design also ensures proper ventilation and helps your child feel secure by maintaining visual contact with their surroundings.
• Handles for Support: The included handles can be attached to the top rails, offering support for babies learning to stand and walk.

Image: The external zipper door allows easy entry and exit for your child.

Image: The full mesh design ensures visibility and breathability.

5. Ciri-ciri Keselamatan

• Silicone Suction Cups: The base of the playpen is equipped with strong silicone suction cups to enhance stability and prevent the playpen from sliding or being pushed around by your child.
• Anti-Collision Corner Cloths: All corners of the playpen are covered with soft, anti-collision cloths to protect your child from bumps and scrapes.
• Thickened Steel Pipes and Foam Padding: The frame utilizes thickened steel pipes for durability and stability, covered with soft foam padding to ensure your child's safety.

Image: Silicone suction cups improve stability, preventing movement.

Image: Anti-collision cloths cover each corner for all-around protection.

6. Penyelenggaraan dan Pembersihan

The playpen's 150D Oxford cloth material is waterproof and easy to clean. For spills like milk or urine stains, simply wipe with a damp cloth. For deeper cleaning, the fabric can be spot cleaned with mild soap and water. Allow to air dry completely before reassembly or storage.

7. Penyelesaian masalah

• Playpen feels unstable: Ensure all pipes are fully inserted into their connectors and that the suction cups on the base are firmly pressed onto a clean, flat surface.
• Kesukaran dengan pemasangan: Double-check that you are using the correct pipe lengths and connector types for each step as indicated in the 'Package Contents' and 'Setup and Assembly' sections. Refer to the assembly video for visual guidance.
• Zipper not working smoothly: Ensure the fabric around the zipper is not caught. Apply a small amount of zipper lubricant if necessary.

8. Spesifikasi

9. Waranti dan Sokongan

For any questions, concerns, or warranty claims regarding your COMOMY playpen, please contact COMOMY customer support directly. Refer to the product packaging or the official COMOMY webtapak untuk maklumat hubungan.