TOOLCY Gas Pressure Washer User Manual

1. Pengenalan dan Selesai Produkview

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your TOOLCY Gas Pressure Washer. Designed for powerful and high-efficiency cleaning, this unit is equipped with a robust engine and an axial-cam pump, making it suitable for demanding tasks such as cleaning cars, driveways, homes, and patios.

Your TOOLCY Gas Pressure Washer delivers 3200 PSI and 2.6 GPM, ensuring superior cleaning performance with minimal effort. Its durable construction and smart features are engineered for long-lasting service and user convenience.

Rajah 1: Utama view of the TOOLCY Gas Pressure Washer.

2. Maklumat Keselamatan

AMARAN: Baca semua amaran dan arahan keselamatan. Kegagalan mematuhi amaran dan arahan boleh mengakibatkan renjatan elektrik, kebakaran dan/atau kecederaan serius.

• Sentiasa pakai peralatan pelindung diri yang sesuai, termasuk perlindungan mata, perlindungan pendengaran dan kasut yang kukuh.
• Never point the spray gun at people, pets, or electrical outlets. The high-pressure spray can cause severe injury.
• Ensure the pressure washer is on a stable, level surface during operation to prevent tipping.
• Do not operate the pressure washer indoors or in poorly ventilated areas due to carbon monoxide fumes.
• Before performing any maintenance or cleaning, always turn off the engine, disconnect the spark plug wire, and release any residual pressure in the system.
• Jauhkan kanak-kanak dan haiwan peliharaan dari kawasan operasi.
• This pressure washer uses gasoline. Handle fuel with extreme care. Store gasoline in an approved container in a well-ventilated area away from ignition sources.
• The rear-inlet system is designed to prevent tripping hazards. Always ensure hoses are properly routed.
• The spray gun features anti-slip grips and a safety lock. Always engage the safety lock when not spraying.

3. Senarai Komponen dan Bahagian

Your TOOLCY Gas Pressure Washer comes with the following components:

• Main Pressure Washer Unit (with 209cc OHV Engine and Axial-Cam Pump)
• High-Pressure Hose (35 FT length)
• Swivel Spray Gun
• Extension Wand (21 inches)
• 5 Pro-Grade Nozzle Tips (0°, 15°, 25°, 40°, Soap Nozzle)
• Onboard Soap Tank (0.9 Gallons)
• Tayar Pepejal 12 inci
• Oil Funnel (for initial oil filling)

Figure 2: Integrated 0.9-gallon soap tank. Soap is not included.

Figure 3: The spray gun features a 360° swivel inlet to prevent hose kinking.

4. Arahan Persediaan

Ikuti langkah-langkah ini untuk persediaan awal sebelum penggunaan pertama:

1. Membongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati. Periksa untuk sebarang kerosakan penghantaran.
2. Perhimpunan pemegang: Pasang pemegang pada unit utama menggunakan perkakasan yang disediakan. Pastikan ia diikat dengan selamat.
3. Tambah Minyak Enjin: The pressure washer is shipped without engine oil. Using the provided oil funnel, add 10W-30 engine oil to the crankcase. Do not overfill. Refer to the engine manual for exact capacity.
4. Tambah Bahan Api: Fill the fuel tank with fresh, unleaded gasoline. Do not use E85 or other high-ethanol fuels.
5. Sambungkan Hos Tekanan Tinggi: Connect one end of the 35FT high-pressure hose to the pump outlet on the pressure washer and the other end to the swivel spray gun. Ensure connections are tight.
6. Sambungkan Bekalan Air: Connect a standard garden hose (not included) to the water inlet on the pump. Ensure the garden hose is free of kinks and has a steady water supply.
7. Pasang muncung: Select the desired nozzle tip and insert it into the quick-connect fitting on the extension wand. Pull back the collar on the quick-connect fitting, insert the nozzle, and release the collar to lock it in place.

5. Arahan Operasi

Before starting, ensure all connections are secure and the water supply is turned on. Never run the pump dry.

5.1 Menghidupkan Enjin

1. Buka injap bahan api.
2. Move the choke lever to the "CHOKE" position (cold engine start).
3. Tetapkan suis enjin kepada "ON".
4. Tarik pemegang starter undur dengan kuat sehingga enjin dihidupkan.
5. Setelah enjin dihidupkan, gerakkan tuil pencekik secara beransur-ansur ke kedudukan "RUN".

5.2 Using Nozzle Tips

The 5 pro-grade nozzle tips allow for versatile cleaning applications:

• 0° (Merah): Pin-point jet for toughest stains and concentrated cleaning. Use with extreme caution.
• 15° (Kuning): High-pressure blast for heavy-duty cleaning of hard surfaces.
• 25° (Hijau): Medium-pressure wash for general cleaning tasks.
• 40° (Putih): Wide spray for delicate surfaces, rinsing, and light cleaning.
• Nozel Sabun (Hitam): Low-pressure spray for applying detergent from the onboard soap tank.

Figure 4: Understanding the different spray patterns of the 5 nozzle tips.

5.3 Applying Detergent

1. Fill the onboard soap tank with pressure washer safe detergent.
2. Pasangkan muncung sabun hitam pada pistol semburan.
3. The pressure washer will automatically draw detergent when the soap nozzle is in use.
4. After applying detergent, switch to a high-pressure nozzle (e.g., 25° or 15°) to rinse the surface thoroughly.

Figure 5: The pressure washer effectively cleans vehicle tires and other surfaces.

6. Penyelenggaraan

Penyelenggaraan tetap memastikan jangka hayat dan prestasi optimum mesin basuh tekanan anda.

6.1 Selepas Setiap Penggunaan

• Turn off the engine and water supply.
• Squeeze the spray gun trigger to release any remaining pressure.
• Disconnect all hoses and drain water from the pump and hoses.
• Clean the nozzle tips and store them properly.
• Wipe down the unit to remove dirt and debris.

6.2 Penyelenggaraan Enjin

• Tukar Minyak: Change the engine oil after the first 5 hours of use, then every 50 hours or annually, whichever comes first. Use 10W-30 engine oil.
• Penapis Udara: Check and clean the air filter regularly, especially in dusty conditions. Replace if damaged.
• Palam Pencucuh: Periksa palam pencucuh setiap tahun. Bersihkan atau gantikan mengikut keperluan.
• Sistem Bahan Api: For long-term storage, drain the fuel tank and carburetor, or use a fuel stabilizer.

6.3 Penyelenggaraan Pam

• Pump Saver: Use a pump saver solution before storing the unit for extended periods to prevent freezing and corrosion.
• Penapis Masuk: Periksa dan bersihkan penapis salur masuk air secara berkala untuk mengelakkan serpihan daripada memasuki pam.

Figure 6: The powerful 209cc 4-stroke OHV engine requires regular maintenance for optimal performance.

Figure 7: The maintenance-free axial-cam pump is designed for extended service life.

7. Penyelesaian masalah

If you encounter problems not listed here or require further assistance, please contact TOOLCY customer service.

8. Spesifikasi

9. Waranti dan Sokongan

TOOLCY provides a 2-Year Limited Manufacturer Service and Parts Coverage for this gas pressure washer. This warranty covers defects in materials and workmanship under normal use.

For any item or technical problems, TOOLCY offers 24 hours of customer service on weekdays. Sila simpan bukti pembelian anda untuk tuntutan waranti.

Maklumat Hubungan:

• For support, please refer to the contact details provided with your product packaging or visit the official TOOLCY webtapak.
• You can also reach out to the seller "TOOLCY" directly through the platform where you purchased the product.