HOFSTEIN Koyoto Floor Lamp Manual Pengguna

1. Arahan Keselamatan

Please read these instructions carefully before assembly and use. Keep this manual for future reference.

• Keselamatan Elektrik: Sentiasa putuskan sambungan lamp from the power supply before cleaning, maintenance, or bulb replacement. Ensure the power outlet voltage sepadan dengan lamp's requirements (230V).
• Pemasangan: l iniamp is designed for indoor use only (IP20). Do not expose to moisture or extreme temperatures. Ensure the lamp diletakkan di atas permukaan yang stabil dan rata untuk mengelakkan terbalik.
• Jenis Mentol: Gunakan hanya mentol E14 dengan wat maksimumtage of 25W per light. Do not exceed the recommended wattage.
• Pengendalian: Glass shades are fragile. Handle with care during assembly and cleaning.
• Kanak-kanak dan Haiwan Kesayangan: Simpan lamp daripada kanak-kanak dan haiwan peliharaan untuk mengelakkan kemalangan.
• kerosakan: Jangan kendalikan lamp if the cord, plug, or any part of the lamp rosak. Hubungi sokongan pelanggan untuk mendapatkan bantuan.

2. Kandungan Pakej

Pastikan semua komponen ada dan tidak rosak sebelum meneruskan pemasangan.

Imej 2.1: Meletup view of the HOFSTEIN Koyoto Floor Lamp components. This image shows the circular base, multiple pole sections, four E14 lamp holders with attached arms, two amber glass shades, two smoked glass shades, and the power cord with integrated foot switch.

• Lamp Pangkalan (1x)
• Lower Pole Section with Power Cord and Foot Switch (1x)
• Middle Pole Section (1x)
• Upper Pole Section with Lamp Holders (1x)
• Amber Glass Shades (2x)
• Smoked Glass Shades (2x)
• Assembly Hardware (screws, washers, etc. - typically pre-attached or in a small bag)
• Manual Pengguna (dokumen ini)

Nota: Mentol lampu tidak termasuk dan mesti dibeli secara berasingan.

3. Persediaan & Pemasangan

Follow these steps to assemble your HOFSTEIN Koyoto Floor Lamp.

1. Buka Pembungkusan Komponen: Keluarkan semua bahagian dari bungkusan dengan berhati-hati dan letakkannya di atas permukaan yang bersih dan lembut untuk mengelakkan calar.
2. Lampirkan Pangkalan: Secure the lower pole section (with the power cord) to the lamp base using the provided screw and washer from underneath the base. Tighten firmly.
3. Sambungkan Bahagian Kutub: Screw the middle pole section onto the lower pole section. Then, screw the upper pole section (with lamp holders) onto the middle pole section. Ensure all connections are tight and secure.
4. Pasang Mentol: Carefully screw E14 bulbs (max 25W each, not included) into each of the four lamp pemegang. Jangan terlalu ketatkan.
5. Pasang Lorek Kaca: Gently place the glass shades over the lamp pemegang. lamp includes two amber and two smoked glass shades. You can arrange them in any desired order. Ensure they are seated securely.
6. Kedudukan Lamp: Letakkan l yang dipasangamp on a stable, level surface in your desired location. Ensure the power cord is not pinched or obstructed.
7. Sambung ke Kuasa: Plug the power cord into a suitable 230V wall outlet.

Image 3.1: Dimensional diagram of the HOFSTEIN Koyoto Floor Lamp. lamp has a total height of 160 cm, a base diameter of 30 cm, and a maximum width of 31 cm at the shades. Each glass shade has a diameter of 15 cm. The power cable length is 187 cm, with the foot switch located approximately 63 cm from the lamp asas.

Image 3.2: Detail of a glass shade attachment. This image illustrates how the spherical glass shade connects to the lamp's central pole via a black metal fixture, ensuring a secure fit.

4. Arahan Operasi

The HOFSTEIN Koyoto Floor Lamp is operated using a simple foot switch.

• Menghidupkan: Once plugged into a power outlet, press the foot switch located on the power cord to turn the lamp pada.
• Mematikan: Press the foot switch again to turn the lamp dimatikan.
• Peredupan: l iniamp is not dimmable. It operates at a single brightness level.

Image 4.1: The HOFSTEIN Koyoto Floor Lamp in operation, displaying its four illuminated glass shades (two amber, two smoked) on a black metal pole.

5. Penyelenggaraan

Penyelenggaraan berkala memastikan jangka hayat dan prestasi optimum peranti andaamp.

• Pembersihan:
  • Sentiasa putuskan sambungan lamp daripada bekalan kuasa sebelum dibersihkan.
  • Wipe the metal parts with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • For glass shades, gently wipe with a soft, damp cloth. Dry immediately with a clean, dry cloth to prevent water spots.
• Penggantian mentol:
  • Pastikan lamp is unplugged and the bulbs have cooled completely before attempting to replace them.
  • Carefully unscrew the old E14 bulb.
  • Screw in a new E14 bulb (max 25W).
• Pemeriksaan: Periodically check the power cord and plug for any signs of damage. Ensure all connections remain tight.

6. Penyelesaian masalah

Jika anda menghadapi masalah dengan l andaamp, refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact HOFSTEIN customer support.

7. Spesifikasi

8. Waranti & Sokongan

HOFSTEIN products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official HOFSTEIN webtapak.

For technical support, replacement parts, or any questions not covered in this manual, please contact HOFSTEIN customer service:

• Webtapak: Visit the HOFSTEIN Store on Amazon
• E-mel/Telefon: Refer to the contact information provided on the official HOFSTEIN webtapak atau dokumentasi pembelian anda.

Please have your model number (H3866498) and purchase date ready when contacting support.