WHUBEFY 8-in-1 Heat Press Machine 15"x12" Instruction Manual

1. Pengenalan

This manual provides detailed instructions for the safe and effective operation of your WHUBEFY 8-in-1 Heat Press Machine. This versatile device is designed for heat transfer and sublimation projects on various items, including t-shirts, mugs, caps, and plates. Please read this manual thoroughly before initial use and retain it for future reference.

2. Arahan Keselamatan

• Sentiasa kendalikan mesin tekan haba pada permukaan yang stabil dan tahan haba.
• Keep hands and fingers clear of the heating element during operation to prevent burns. The heating plate is a hot surface.
• Pastikan pengudaraan yang betul di kawasan kerja.
• Do not leave the machine unattended while it is powered on or heating.
• Cabut plag mesin daripada soket kuasa apabila tidak digunakan atau sebelum pembersihan/penyelenggaraan.
• Keep children and pets away from the heat press.
• Use heat-resistant gloves when handling hot items or changing attachments.
• The machine is equipped with an overheat protection feature that automatically shuts off power if the temperature exceeds safe limits.

3. Kandungan Pakej

Your WHUBEFY 8-in-1 Heat Press Machine package includes the following components:

• 15"x12" Flatbed T-shirt Press Machine (main unit)
• Mug Press Attachments (9oz, 11oz, 12oz, 17oz)
• Plate Press Attachments (1.5" max diameter, 2" max diameter)
• Hat/Cap Press Attachment (5.5"x3.3" inch)
• Kotak Kawalan Digital
• Kord Kuasa
• Manual Pengguna
• Two Teflon Sheets
• Thickened Silicone Pad and Sponge Pad

Image: WHUBEFY 8-in-1 Heat Press Machine with all included attachments laid out.

4. Produk Lebihview dan Ciri

• Kawalan Suhu Tepat: Dual LED Digital control box displays time and temperature (Fahrenheit or Celsius) for precise control. Temperature range: 200-450 °F (95-232 °C).
• Julat Pemasa: 0-999 seconds. An audible alarm sounds when the time is complete.
• Premium Quality Heating Plate: Advanced die-cast aluminum heating plate with a non-stick Teflon-coated surface prevents scorching and ensures steady printing.
• 360° Swing-Away Function: Allows the heating plate to be rotated to a safe side, reducing the risk of accidental contact with the hot surface.
• Reka Bentuk Mesra Pengguna: Simple interface and clear instructions for easy operation. Quick heating and consistent heat/pressure for seamless transfers.
• Pelbagai Fungsi: Includes attachments for t-shirts, mugs (various sizes), plates, and hats, offering versatility for diverse projects on cotton, polyester, and ceramics.

Image: The WHUBEFY Heat Press demonstrating its 360-degree swing-away feature, allowing the top platen to move aside for safety and ease of use.

Image: Close-up of the digital control panel on the WHUBEFY Heat Press, showing temperature and time settings.

5. Arahan Persediaan

1. Membongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati. Periksa untuk sebarang kerosakan.
2. penempatan: Place the main heat press unit on a sturdy, flat, and heat-resistant surface. Ensure there is enough space around the machine for the 360° swing-away function.
3. Sambungan Kuasa: Connect the power cord to the machine and then to a grounded electrical outlet (110 Volts).
4. Attaching Platens:
   • The T-shirt platen is usually pre-installed. To change to other attachments (mug, cap, plate), you will need to unplug the corresponding heating element cable from the control box and unscrew any securing nuts/bolts.
   • Align the desired attachment with the mounting points and secure it using the provided screws or clips. Reconnect the heating element cable to the control box.
5. Pelarasan Tekanan: Adjust the pressure knob on top of the heating element to achieve the desired pressure for your material. Turn clockwise for more pressure, counter-clockwise for less.

6. Arahan Operasi

6.1 General Operation (Temperature & Time Setting)

1. Hidupkan kuasa: Flip the red power switch on the side of the control box to the "ON" position.
2. Tetapkan Suhu: Press the "SET" button once. The temperature display will flash. Use the "+" and "-" buttons to adjust to your desired temperature (e.g., 365°F for sublimation). Press "SET" again to confirm.
3. Tetapkan Masa: After setting the temperature, press the "SET" button again. The time display will flash. Use the "+" and "-" buttons to adjust to your desired time (e.g., 60 seconds). Press "SET" again to confirm.
4. Mulakan Pemanasan: The machine will begin heating to the set temperature. The "OUT" light will illuminate. Once the set temperature is reached, the machine will beep.
5. Tukar Unit Suhu: To switch between Fahrenheit (°F) and Celsius (°C), long press the "+" and "-" buttons simultaneously for five seconds.

6.2 T-shirt Pressing

1. Place the t-shirt onto the bottom platen. Ensure it is flat and smooth.
2. Position your transfer design (e.g., HTV, sublimation print) onto the t-shirt.
3. Cover the design with a Teflon sheet to protect the heating element and prevent ink transfer.
4. Swing the top heating platen over the t-shirt and press the handle down firmly until it locks. The timer will start automatically.
5. Once the timer beeps, lift the handle and swing the heating platen away.
6. Carefully remove the Teflon sheet and peel off the transfer paper (hot or cold peel, depending on your material).

Image: A t-shirt being pressed on the WHUBEFY Heat Press, demonstrating the application of a design.

6.3 Mug Pressing

1. Attach the appropriate mug press attachment for your mug size.
2. Wrap your sublimation print around the mug and secure it with heat-resistant tape.
3. Insert the mug into the mug press attachment. Adjust the pressure knob on the mug press to ensure firm contact.
4. Close the mug press handle. The timer will start.
5. After the timer beeps, open the mug press and carefully remove the hot mug using heat-resistant gloves.
6. Immediately peel off the transfer paper. Allow the mug to cool completely.

Image: A close-up of the mug press attachment on the WHUBEFY Heat Press, ready for use.

6.4 Cap Pressing

1. Attach the cap press attachment to the main unit.
2. Place the cap onto the cap platen, ensuring it is smooth and centered.
3. Position your design onto the cap.
4. Lower the heating element onto the cap and apply pressure. The timer will start.
5. Once the timer beeps, lift the heating element and carefully remove the cap.
6. Peel off the transfer paper.

6.5 Plate Pressing

1. Attach the appropriate plate press attachment for your plate size.
2. Secure your sublimation print onto the plate with heat-resistant tape.
3. Place the plate onto the plate press attachment.
4. Lower the heating element onto the plate and apply pressure. The timer will start.
5. After the timer beeps, lift the heating element and carefully remove the hot plate using heat-resistant gloves.
6. Peel off the transfer paper. Allow the plate to cool.

7. Penyelenggaraan

• Sentiasa cabut plag mesin dan biarkan ia sejuk sepenuhnya sebelum dibersihkan.
• Wipe the heating element with a soft, damp kain. Jangan gunakan pembersih yang kasar.
• Regularly check all connections and fasteners to ensure they are secure.
• Store the heat press in a dry, dust-free environment.

8. Penyelesaian masalah

Jika anda menghadapi masalah, rujuk kepada masalah dan penyelesaian biasa berikut:

• Mesin Tidak Dipanaskan:
  • Periksa sama ada suis kuasa dihidupkan.
  • Ensure the power cord is securely plugged into both the machine and the outlet.
  • Verify that the heating element cable for the attached platen is correctly connected to the control box.
• Pemindahan Haba Tidak Sekata:
  • Ensure the pressure is evenly distributed across the platen. Adjust the pressure knob if necessary.
  • Check that the item being pressed is flat and free of wrinkles.
  • Verify the heating element is clean and free of debris.
• Design Not Transferring Properly:
  • Confirm the correct temperature and time settings for your specific transfer material.
  • Ensure the transfer paper is placed correctly (print side down for sublimation).
  • Check the quality and compatibility of your heat transfer or sublimation materials with the garment/item.

9. Spesifikasi

• Jenama: Whubefy
• model: Penekan Haba 8-dalam-1
• Voltage: 110 Volt
• Wattage: 900 watt
• Dimensi Produk: 15 x 12 x 18 inci (unit utama)
• Berat Barang: 41.6 paun
• Bahan: Logam, Plastik
• Penilaian Suhu Atas: 450 Degrees Fahrenheit (232 °C)

10. Waranti dan Sokongan

WHUBEFY is committed to customer satisfaction. All WHUBEFY products come with impeccable repair service. For any issues or support needs, please contact WHUBEFY customer service. Your satisfaction is our top priority.

For more information or to visit the brand store, please visit: WHUBEFY Store