JONSBO CR1400 EVO ARGB CPU Cooler Instruction Manual

1. Produk Lebihview

The JONSBO CR1400 EVO ARGB CPU Cooler is a compact and efficient air cooling solution designed for various Intel and AMD platforms. It features a 92mm fan, four copper heat pipes, and integrated ARGB lighting, providing effective heat dissipation and aesthetic enhancement for your PC build.

Image 1.1: JONSBO CR1400 EVO ARGB CPU Cooler, showcasing its compact design and vibrant ARGB lighting.

This cooler is engineered for low-noise operation and optimized heat pipe performance, making it suitable for mini-ITX and other compact PC cases due to its 130mm height.

2. Ciri-ciri Utama

• Penyejukan yang cekap: Features 4 nickel-plated copper heat pipes and a 92mm fan for effective heat dissipation, with a 25% improvement in heat pipe load solving efficiency.
• Reka bentuk padat: Dimensions of L92 * W70 * H130mm make it compatible with most tower cases, especially mini chassis.
• Operasi Bunyi Rendah: Equipped with a new 9cm PWM ARGB fan featuring 6 sickle-shaped fan blades and 8 shock-absorbing silicone pads for quiet performance. Fan noise ranges from 22.3-33.8 dB(A) and speed from 800-2200 RPM.
• Integrated ARGB Lighting: Features an integrated top cover with moderate and elegant lighting effects, and a vibrant ARGB fan.
• Keserasian Memori: Crooked neck heat pipe design avoids interference with memory modules, allowing full display of memory (including light effects).
• Sokongan Platform Luas: Compatible with Intel LGA1851/1700/1200/115X and AMD AM4/AM5 sockets.

Image 2.1: Illustration of the optimized heat pipe performance and efficiency.

Image 2.2: Details on the new fan iteration, highlighting low noise and fan speed range.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• JONSBO CR1400 EVO ARGB CPU Cooler (Heatsink with pre-attached fan)
• Mounting Hardware for Intel LGA1851/1700/1200/115X
• Mounting Hardware for AMD AM4/AM5
• Pes Termal (yang telah disapu terlebih dahulu atau dalam tiub)
• Manual Pengguna (dokumen ini)

Note: The product listing specifies "FAN Copper pipe" as what's in the box, which refers to the cooler itself. Additional mounting hardware and thermal paste are standard inclusions for CPU coolers.

4. Panduan Pemasangan

Before installation, ensure your system is powered off and unplugged. Refer to your motherboard's manual for specific CPU socket and cooler mounting area details.

4.1. Persediaan

1. Buka bungkusan semua komponen dan sahkan terhadap senarai kandungan pakej.
2. Bersihkan permukaan CPU dengan teliti menggunakan alkohol isopropil untuk membuang sebarang pes haba atau sisa lama.
3. Identify the correct mounting brackets for your CPU socket (Intel or AMD).

4.2. Memasang Penyejuk

1. Install the appropriate backplate (if required for your socket) onto the motherboard from the rear.
2. Secure the standoffs onto the front side of the motherboard, aligning with the backplate holes.
3. Sapukan sedikit pes haba bersaiz kacang ke bahagian tengah penyebar haba bersepadu (IHS) CPU anda.
4. Carefully place the JONSBO CR1400 EVO cooler onto the CPU, aligning the mounting screws with the standoffs.
5. Tighten the mounting screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until snug. Do not overtighten.
6. Sambungkan kabel kipas PWM 4-pin ke pengepala CPU_FAN pada papan induk anda.
7. Connect the ARGB 3-pin cable to a compatible 5V ARGB header on your motherboard.

Image 4.1: The CR1400 EVO cooler mounted on a motherboard, demonstrating its clearance around RAM slots.

Image 4.2: Visual representation of the cooler's design to avoid blocking memory slots.

5. Operasi

Once installed and connected, the JONSBO CR1400 EVO ARGB CPU Cooler will operate automatically based on your motherboard's fan control settings. The PWM function allows the fan speed to adjust according to CPU temperature, ensuring optimal cooling performance and noise levels.

5.1. Kawalan Pencahayaan ARGB

The ARGB lighting can be controlled via your motherboard's compatible 5V ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync). Ensure your motherboard has a 3-pin, 5V ARGB header. Do not connect to a 12V RGB header, as this will damage the LEDs.

• Install the appropriate ARGB control software for your motherboard.
• Use the software to customize lighting effects, colors, and brightness.

6. Penyelenggaraan

Penyelenggaraan tetap membantu memastikan prestasi optimum dan jangka hayat penyejuk CPU anda.

• Penyingkiran habuk: Periodically (every 3-6 months, or more frequently in dusty environments) use compressed air to clear dust from the heatsink fins and fan blades. Ensure the fan is not spinning rapidly during this process to prevent damage to the bearings.
• Pembersihan Kipas: If dust buildup is significant, gently wipe the fan blades with a soft, dry cloth.
• Tampal Terma: Re-applying thermal paste is generally not required unless the cooler is removed. If you reinstall the cooler, clean off old thermal paste from both the CPU and cooler base and apply new thermal paste.

7. Penyelesaian masalah

8. Spesifikasi

Image 8.1: Detailed dimensions of the JONSBO CR1400 EVO CPU Cooler.

9. Waranti dan Sokongan

Jonsbo products are manufactured to high quality standards. For warranty information and technical support, please refer to the official Jonsbo webtapak atau hubungi peruncit tempatan anda. Simpan bukti pembelian anda untuk tuntutan waranti.

Untuk bantuan lanjut, anda boleh melawati Jonsbo Store on Amazon.