pengenalan
This manual provides comprehensive instructions for the installation, operation, and maintenance of your BesLowe A923 13-inch Motion Sensor Outdoor Wall Light. This fixture combines modern design with advanced functionality, including a PIR motion sensor, photocell sensor for dusk-to-dawn operation, and three distinct lighting modes. Designed for durability, it is constructed from high-quality metal and glass to withstand various weather conditions.
Maklumat Keselamatan
- Always turn off the power at the circuit breaker before beginning installation, maintenance, or bulb replacement.
- Rujuk juruelektrik yang berkelayakan jika anda tidak pasti tentang mana-mana bahagian proses pemasangan.
- Pastikan semua sambungan pendawaian selamat dan mematuhi kod elektrik tempatan.
- Jangan melebihi wat maksimumtage specified for the bulb (100W Max).
- Kendalikan komponen kaca dengan berhati-hati untuk mengelakkan pecah.
Kandungan Pakej
Please verify that all components are present before installation:
- 1 x BesLowe A923 Outdoor Wall Light Fixture
- 1 x Mounting Hardware Kit (includes crossbar, screws, wire nuts)
- 1 x Manual Arahan
Nota: E26 base bulb (100W Max) is not included and must be purchased separately. Dimmable LED or incandescent bulbs are recommended for optimal performance.
Persediaan dan Pemasangan
The BesLowe A923 is designed for easy installation, but professional assistance is recommended for electrical work.
Alat Diperlukan (Tidak Termasuk)
- Pemutar skru
- Pelucut Kawat
- Pita Elektrik
- Cermin Mata Keselamatan
Langkah Pemasangan
- Matikan Kuasa: Before starting, ensure the power to the electrical box is turned off at the circuit breaker.
- Sediakan Pemasangan: Remove the existing light fixture (if applicable). Attach the provided mounting crossbar to the electrical box using the screws.
- Sambungan Wayar: Connect the fixture's wires to the household wires: black to black (live), white to white (neutral), and copper ground wire to the ground wire from the electrical box. Secure connections with wire nuts and electrical tape.
- Pasang Lekapan: Carefully align the fixture with the mounting screws on the crossbar. Push the fixture onto the screws and secure it with the decorative nuts.
- Pasang Mentol: Insert an E26 base bulb (100W Max, not included) into the socket. The open-bottom design allows for easy bulb replacement.
- Pulihkan Kuasa: Hidupkan semula kuasa pada pemutus litar.
Video Pemasangan
Arahan Operasi
The BesLowe A923 features an advanced PIR motion sensor and photocell sensor, offering three distinct lighting modes for intelligent and energy-efficient illumination. Mode switching is simplified with a single button.
Understanding Lighting Modes
- Mod dwi-terang: The light stays at a low brightness (default 40%, adjustable 15-50%) at night. When motion is detected, it brightens to 100% for a set duration, then returns to low brightness. Ideal for security.
- Mod HIDUP/MATI: The light remains off until motion is detected, then illuminates at 100% brightness. It turns off again after no motion is detected. This mode helps save electricity.
- Mod Gantian Manual: The light stays on at 100% brightness for 6-8 hours after activation. It automatically turns off at dawn and reverts to the previously selected motion-sensing mode (Dual-bright or ON/OFF). Perfect for extended outdoor activities.
Menukar Mod
The mode can be easily switched using the discreet button located on the fixture's top panel. A single click cycles through the available modes.
Adjusting Brightness (Dual-bright Mode)
In Dual-bright mode, the low brightness level (when no motion is detected) can be adjusted from 15% to 50%. To adjust, long-press the mode switch button until the desired brightness is reached.
Penyelenggaraan
- Pembersihan: Untuk membersihkan lekapan, pastikan kuasa dimatikan. Lap dengan kain lembutamp cloth. Avoid abrasive cleaners that may damage the finish or glass.
- Penggantian mentol: The open-bottom design allows for easy access to the bulb. Ensure power is off before replacing the bulb. Use only E26 base bulbs, not exceeding 100W.
Menyelesaikan masalah
If you encounter issues with your BesLowe A923 light, refer to the table below for common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | No power, loose wiring, faulty bulb. | Check circuit breaker. Verify all wire connections. Replace bulb. |
| Penderia gerakan tidak mengesan. | Sensor obstructed, incorrect mode, sensitivity issue. | Ensure sensor is clear. Cycle through modes. Adjust sensor position if possible. |
| Lampu sentiasa menyala. | Manual Override mode active, continuous motion, faulty sensor. | Cycle through modes to exit Manual Override. Check for constant motion sources. Contact support if sensor is faulty. |
| Cahaya berkelip-kelip. | Loose bulb, incompatible bulb, unstable power. | Tighten bulb. Ensure bulb is dimmable LED or incandescent. Consult electrician for power issues. |
Spesifikasi
- Jenama: BesLowe
- Nama Model: A923
- warna: Hitam
- Bahan: Kaca, Logam
- gaya: moden
- Dimensi Produk: 5"L x 5"W x 13"H
- Penggunaan Dalaman/Luar: Luar
- Sumber Kuasa: Berwayar
- Jenis Pemasangan: Lekap di dinding
- Ciri Khas: Dusk to Dawn, Motion Sensor, Waterproof
- Kaedah Kawalan: Touch (via button on fixture)
- Jenis Sumber Cahaya: LED (bulb not included)
- Voltage: 120 Volt
- Wattage (Maksimum): 100 Watt (untuk mentol E26)
- Pangkalan Mentol: E26
- Tahap Rintangan Air: Kalis air
Waranti dan Sokongan
This product comes with an Extended Warranty. For detailed warranty information or technical support, please refer to the contact information provided in your product packaging or visit the official BesLowe webtapak.