Jectse Jectsega4vnm10yk-12

Jectse 80mm Thermal Receipt Printer User Manual

Model: Jectsega4vnm10yk-12

pengenalan

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Jectse 80mm Thermal Receipt Printer. Please read this manual carefully before using the device to ensure proper functionality and longevity.

Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

  • Jectse 80mm Thermal Receipt Printer
  • Kabel USB
  • Thermal Paper Roll (may be pre-installed or separate)
  • Manual Pengguna (dokumen ini)
Jectse 80mm Thermal Receipt Printer and USB cable

Image: The Jectse 80mm Thermal Receipt Printer (Orange White) shown alongside its included USB charging cable.

Persediaan

1. Memuatkan Kertas Termal

  1. Open the printer cover by gently lifting the orange transparent lid.
  2. Insert the thermal paper roll with the printing surface facing upwards. Ensure the roll is seated correctly in the paper compartment.
  3. Pull a small amount of paper out past the toothed blade.
  4. Tutup penutup pencetak dengan kuat sehingga ia berbunyi klik pada tempatnya.
Jectse 80mm Thermal Receipt Printer with paper loaded

Imej: Atas view of the Jectse 80mm Thermal Receipt Printer with the orange transparent lid closed, indicating paper is loaded.

2. Menghidupkan dan Mengecas

  • Connect the USB cable to the printer's charging port and the other end to a suitable USB power adapter or computer.
  • Press and hold the power button (marked with a circle and vertical line) to turn the printer on. The power indicator light will illuminate.
  • The battery indicator lights will show the current charge level. Charge the printer fully before first use.
Close-up of the Jectse 80mm Thermal Receipt Printer control panel

Image: A close-up of the printer's control panel, showing the power button, battery indicator, and paper feed button.

3. Ketersambungan

The printer supports Ethernet connectivity. For mobile use, it is designed to connect wirelessly to devices such as smartphones.

  • Sambungan Ethernet: Connect an Ethernet cable to the printer's Ethernet port and to your network router or switch.
  • Wireless Connection (e.g., Bluetooth): Refer to your device's operating system or application instructions for pairing with a mobile printer. Typically, this involves enabling Bluetooth on your mobile device, searching for the printer, and pairing.
Jectse 80mm Thermal Receipt Printer connected wirelessly to a smartphone

Image: The Jectse 80mm Thermal Receipt Printer shown next to a smartphone with a wireless signal icon, illustrating mobile connectivity.

Arahan Operasi

Printing a Receipt/Label

  1. Ensure the printer is powered on and connected to your device (via Ethernet or wirelessly).
  2. Open the application or software from which you wish to print.
  3. Select the print option within your application. Choose the Jectse 80mm Thermal Receipt Printer from the list of available printers.
  4. Confirm print settings (e.g., paper size, orientation) if prompted.
  5. Initiate the print job. The printer will begin printing.
  6. Once printing is complete, use the integrated toothed blade to cleanly tear off the receipt or label.
bersudut view of the Jectse 80mm Thermal Receipt Printer

Imej: Bersudut view of the printer, highlighting its compact design and the paper output slot with the toothed blade.

Penyelenggaraan

Membersihkan Pencetak

  • Ensure the printer is powered off and disconnected from power before cleaning.
  • Gunakan kain lembut yang tidak berbulu dampened with isopropyl alcohol to clean the print head and the paper path.
  • Do not use abrasive cleaners or spray liquids directly into the printer.
  • Allow all components to dry completely before powering on the printer.

Replacing Thermal Paper

Follow the steps outlined in the "Loading Thermal Paper" section under Setup when the paper roll is depleted.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Pencetak tidak dihidupkan.Isu bateri atau sambungan kuasa rendah.Charge the printer using the provided USB cable. Ensure the power adapter is working.
Tiada output cetakan.Paper loaded incorrectly, out of paper, or connectivity issue.Check paper loading and ensure paper is not depleted. Verify network/wireless connection. Restart printer and device.
Kualiti cetakan kurang baik.Kepala cetak kotor atau bateri lemah.Clean the print head as described in the Maintenance section. Ensure the printer is fully charged.
Cannot connect wirelessly.Bluetooth/network not enabled or printer not discoverable.Ensure Bluetooth is enabled on your mobile device. Check printer's network settings. Try restarting both devices.

Spesifikasi

  • model: Jectsega4vnm10yk-12
  • Dimensi Produk: 5.91 x 3.94 x 2.36 inci (15.01 x 10.01 x 5.99 cm)
  • Berat Barang: 9.1 auns (257.98 gram)
  • Teknologi Ketersambungan: Ethernet (and implied wireless for mobile use)
  • Teknologi Percetakan: Terma Terus
  • Output Pencetak: Monokrom
  • Monokrom Kelajuan Cetakan Maks: 80mm sesaat
  • Ciri Khas: Adjustable (likely referring to paper width or settings)
  • warna: Oren Putih
  • Pengeluar: Jectse
  • Tarikh Mula-mula Tersedia: 18 Februari 2025

Waranti dan Sokongan

For warranty information and technical support, please refer to the official Jectse webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda untuk tuntutan waranti.

Jectse Store Link: Visit the Jectse Store on Amazon

© 2025 Jectse. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.