Goodyear 8000 mAh Lithium Battery Emergency Jump Starter User Manual

1. Pengenalan

Thank you for choosing the Goodyear 8000 mAh Lithium Battery Emergency Jump Starter. This compact and powerful device is designed to provide emergency jump-starting for various vehicles, serve as a portable power bank for electronic devices, and function as an LED flashlight. Please read this manual thoroughly before use to ensure safe and optimal operation.

Image 1.1: The Goodyear 8000 mAh Emergency Jump Starter is suitable for various vehicle types, including gasoline engines up to 2500cc and diesel engines up to 2000cc.

2. Maklumat Keselamatan

Sentiasa patuhi langkah keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada peranti dan kenderaan:

• Do not expose the jump starter to extreme temperatures, direct sunlight, or fire.
• Do not disassemble, modify, or attempt to repair the unit. Contact qualified service personnel.
• Jauhkan daripada kanak-kanak.
• Pastikan pengudaraan yang betul semasa penggunaan dan pengecasan.
• Elakkan litar pintas pada lampu pintaramps.
• Wear eye protection and gloves when working with vehicle batteries.
• If battery acid comes into contact with skin or eyes, flush immediately with plenty of clean water and seek medical attention.
• Jangan lompat bateri beku.
• Pastikan pemula lompat dicas sepenuhnya sebelum digunakan untuk prestasi optimum.

Perlindungan Keselamatan Bersepadu:

This jump starter is equipped with smart clamps that provide multiple safety features:

• Perlindungan Polariti Terbalik: Mencegah kerosakan jika clamps disambungkan dengan salah.
• Perlindungan lebihan arus: Perlindungan terhadap aliran arus yang berlebihan.
• Overvoltage Perlindungan: Mengekalkan volum yang stabiltage, protecting the device and vehicle.
• Perlindungan Lebihan: Prevents damage from excessive power draw.

Image 2.1: The smart clamps feature reverse polarity protection for safe connections.

Image 2.2: Overvoltage protection maintains stable voltage, preventing damage.

Image 2.3: Overcurrent protection regulates current for total protection.

Image 2.4: Overload protection ensures safe charging and extended device life.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Goodyear 8000 mAh Emergency Jump Starter Unit
• Pelompat Pintar Clamps (Merah dan Hitam)
• Kabel Pengecas USB
• Beg Penyimpanan
• Manual Pengguna

Unit Pemula Lompat

Pelompat Pintar Clamps

Kabel Pengecas USB

Beg Penyimpanan

4. Produk Lebihview

The Goodyear 8000 mAh Jump Starter is a compact device with multiple functionalities. Its small size (approximately 14 x 7.8 x 1.7 cm) makes it highly portable.

Imej 4.1: Depan view of the jump starter with key specifications and dimensions.

Pengenalan Komponen:

Imej 4.2: Terperinci view of the jump starter ports and indicators.

• USB Standard Output: Untuk mengecas peranti elektronik luaran.
• Lampu LED: Lampu suluh berbilang mod.
• 12 Volt Vehicle Starting Port: Connects to the smart jumper clamps.
• Input USB Mini: Untuk mengecas unit penghidup lompat.
• Penunjuk Status Caj: LED strip indicating remaining battery level.

5. Persediaan: Mengecas Pemula Jump

Before first use, fully charge the jump starter. It is recommended to recharge the unit after each use or every 3 months if stored.

1. Locate the Mini USB Input port on the jump starter.
2. Connect the provided USB charging cable to the Mini USB Input port.
3. Connect the other end of the USB cable to a 5V/2A USB wall adapter (not included) or a powered USB port.
4. The charge status indicator LEDs will illuminate, showing the charging progress. All LEDs will be solid when fully charged.
5. Pengecasan biasanya mengambil masa kira-kira 4 jam.

6. Arahan Operasi

6.1. Lompat Memulakan Kenderaan

Pastikan jump starter dicas sekurang-kurangnya 75% sebelum cuba memulakan kenderaan dengan jump start.

1. Matikan pencucuh kenderaan dan semua aksesori.
2. Sambungkan pelompat pintar clamps to the 12 Volt Vehicle Starting Port on the jump starter. Ensure a secure connection.
3. Sambungkan MERAH (+) clamp ke terminal positif (+) bateri kenderaan.
4. Sambungkan HITAM (-) clamp to the negative (-) terminal of the vehicle's battery or a solid, unpainted metal part of the vehicle's chassis away from the battery.
5. Once connected, the smart clamps will indicate a ready status (refer to clamp indicator lights if available).
6. Hidupkan enjin kenderaan. Jika ia tidak dapat dihidupkan dengan segera, tunggu 30 saat dan cuba lagi. Jangan engkol selama lebih daripada 3 saat setiap percubaan.
7. Once the vehicle starts, immediately disconnect the BLACK (-) clamp pertama, kemudian MERAH (+) clamp daripada bateri kenderaan.
8. Finally, disconnect the smart jumper clamps daripada unit pemula lompat.

Image 6.1: Correct connection of the jump starter to a vehicle battery.

6.2. Menggunakan sebagai Power Bank

The jump starter can charge portable electronic devices via its USB Standard Output port.

1. Connect your device's USB charging cable to the USB Standard Output port on the jump starter.
2. Connect the other end of the cable to your electronic device (e.g., smartphone, tablet, camera).
3. Pemula lompat akan mula mengecas peranti anda secara automatik.
4. Pantau status pengecasan peranti anda. Putuskan sambungan apabila pengecasan selesai.

Image 6.2: The jump starter functioning as a power bank to charge a smartphone.

6.3. Menggunakan Lampu Suluh LED

The integrated LED flashlight offers three modes for various situations.

1. To turn on the flashlight, press and hold the power button (usually located near the LED light) for a few seconds.
2. Press the power button briefly to cycle through the modes: Continuous Light > Flashing Light > SOS (two speeds).
3. To turn off the flashlight, press the power button until the light turns off, or press and hold the power button again.

Image 6.3: The LED flashlight with its three operational modes.

7. Penyelenggaraan dan Penyimpanan

• Bersihkan unit dengan kain kering dan lembut. Jangan gunakan pembersih atau pelarut yang melelas.
• Store the jump starter in a cool, dry place, away from direct sunlight and moisture.
• For long-term storage, ensure the unit is charged to at least 50% and recharge every 3 months to maintain battery health.
• Kekalkan cl pintaramps bersih dan bebas daripada kakisan.

8. Penyelesaian masalah

9. Spesifikasi