BONTEC Electric Standing Desk Frame User Manual

1. Pengenalan

Thank you for choosing the BONTEC Electric Standing Desk Frame. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new height-adjustable desk frame. This dual-motor frame is designed to support a wide range of desktop sizes, promoting a healthier and more dynamic workspace by allowing seamless transitions between sitting and standing positions.

Image: The BONTEC Electric Standing Desk Frame integrated into a modern office setup, showcasing its functionality with a laptop and accessories on a wooden desktop.

2. Maklumat Keselamatan

Please read all safety instructions carefully before assembly and operation. Failure to follow these instructions may result in injury or damage to the product.

• Pastikan semua komponen ada dan tidak rosak sebelum dipasang. Jangan gunakan jika ada bahagian yang hilang atau patah.
• Jauhkan kanak-kanak dan haiwan peliharaan daripada meja semasa operasi untuk mengelakkan kecederaan akibat bahagian yang bergerak.
• Ensure the power cord is properly connected and not pinched or damaged.
• Do not overload the desk. The maximum load capacity is 185 paun (83.9 kg).
• Keep hands and fingers clear of the lifting columns and crossbar during height adjustments.
• Only use the desk frame indoors in a dry environment.
• Do not attempt to modify the desk frame. Any modifications will void the warranty.

3. Kandungan Pakej

Verify that all the following components are included in your package. If any parts are missing or damaged, please contact customer support.

Imej: Meletup view of the BONTEC Electric Standing Desk Frame components, showing the main structural parts and the digital control panel.

• Left Lifting Column (Leg)
• Right Lifting Column (Leg)
• Perhimpunan Palang
• Panel Kawalan dengan Paparan LED
• Penyesuai Kuasa dan Kabel
• Mounting Brackets for Desktop
• Kaki Boleh Laras
• Klip Kabel
• Assembly Hardware (screws, Allen keys, etc.)
• Manual Arahan

4. Arahan Persediaan dan Pemasangan

Assembly of the BONTEC Electric Standing Desk Frame is designed to be straightforward. Follow these steps carefully.

4.1 Preparing Your Workspace

Clear an open area for assembly. It is recommended to assemble the desk frame on a soft surface (e.g., carpet) to prevent scratches to the components.

4.2 Memasang Kerangka

1. Attach the lifting columns to the crossbar assembly using the provided screws. Ensure they are securely fastened.
2. Install the adjustable feet onto the bottom of each lifting column. These can be adjusted later to level the desk.
3. Extend the crossbar to the desired width to accommodate your desktop. The frame is compatible with tabletops ranging from 40" to 63" in length dan 24" to 30" in width.

Image: A visual representation of the desk frame's adjustable width, indicating the range for compatible desktop dimensions.

4.3 Attaching the Desktop

1. Carefully place your desktop upside down on a soft, protected surface.
2. Position the assembled desk frame onto the desktop, ensuring it is centered and aligned.
3. Secure the desk frame to the desktop using the provided mounting brackets and screws. Pre-drilling pilot holes may be necessary depending on your desktop material.

4.4 Connecting the Electronics

1. Connect the motor cables from each lifting column to the control box.
2. Connect the control panel cable to the control box.
3. Connect the power adapter to the control box, then plug the power cable into a wall outlet.

Imej: A terperinci view of the desk's control panel, highlighting the LED display, up/down arrows, and memory preset buttons (1, 2, 3, S).

4.5 Pengurusan Kabel

Use the included adhesive-backed cable clips to organize and secure all cables, preventing tangles and ensuring a clean workspace.

5. Arahan Operasi

Your BONTEC Electric Standing Desk Frame is equipped with a user-friendly control panel for easy height adjustment and memory functions.

5.1 Melaraskan Ketinggian

• Tekan ke Atas (▲) butang untuk menaikkan meja.
• Tekan ke Bawah (▼) butang untuk menurunkan meja.
• The LED display will show the current height of the desk. The height adjustment range is from 28.3 inches (72 cm) to 46.5 inches (118 cm).

Image: A visual comparison of the desk at its minimum (28.3 inches) and maximum (47.2 inches, note: product description states 46.5 inches) height settings, illustrating the adjustable range.

5.2 Menggunakan Pratetap Memori

The control panel features three memory preset buttons (1, 2, 3) to save and recall your preferred sitting and standing heights.

1. Laraskan meja pada ketinggian yang diingini menggunakan butang Atas/Bawah.
2. Tekan ke S button. The LED display will show 'S-'.
3. Within 5 seconds, press the desired memory button (1, 2, atau 3) to save the current height. The display will show 'S-1', 'S-2', or 'S-3' to confirm.
4. Untuk mengingat semula ketinggian yang disimpan, hanya tekan butang memori yang sepadan (1, 2, atau 3Meja akan bergerak secara automatik ke kedudukan yang disimpan.

5.3 Dual Motor System

The desk frame is equipped with dual motors for smooth, stable, and quiet operation. The motors operate at less than 55dB, ensuring minimal disturbance in your workspace.

Image: An illustration emphasizing the powerful dual motors, indicating stronger and faster adjustments, a high weight capacity of 220 lbs (note: product description states 185 lbs), and ultra-quiet operation below 50dB.

6. Penyelenggaraan

Regular maintenance helps ensure the longevity and optimal performance of your desk frame.

• Pembersihan: Lap rangka meja dengan kain lembut,amp kain. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar.
• Pemeriksaan: Periksa semua skru dan sambungan secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
• Pengurusan Kabel: Ensure cables remain neatly organized and are not pinched or tangled, which could affect operation.
• Pelinciran: The lifting columns are pre-lubricated and generally do not require additional lubrication. If you notice any unusual friction, contact customer support.

7. Penyelesaian masalah

If you encounter any issues with your BONTEC Electric Standing Desk Frame, refer to the following common problems and solutions.

If the problem persists after attempting these solutions, please contact BONTEC customer support for further assistance.

8. Spesifikasi

9. Waranti dan Sokongan

BONTEC stands behind the quality of its products. For warranty information, technical support, or to inquire about replacement parts, please contact BONTEC customer service through the retailer where you purchased the product or visit the official BONTEC webtapak.

Please have your model number (ESD03-BK-UK-FBA) and purchase date ready when contacting support.