BSMOOM B05

BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit User Manual

model: B05

Jenama: BSMOOM

1. Maklumat Keselamatan

Sila baca semua amaran dan arahan keselamatan sebelum menggunakan produk ini. Kegagalan mematuhi amaran dan arahan boleh mengakibatkan renjatan elektrik, kebakaran dan/atau kecederaan serius.

  • jangan hidupkan semula bateri yang beku.
  • jangan gunakan jump starter jika kabel atau penutupnyaamps rosak.
  • Ensure proper polarity: Sambungkan cl merahamp ke terminal positif (+) dan cl hitamamp to the negative (-) terminal. Reverse polarity can cause damage.
  • Alih keluar clamps promptly: Putuskan sambungan clamps from the vehicle battery immediately after the engine starts.
  • Jauhi daripada kanak-kanak: Peranti ini bukan mainan.
  • Suhu operasi: Use the device within the specified temperature range (-4°F to 140°F).
  • Pengudaraan: Ensure adequate ventilation when operating the air compressor.
  • Ciri-ciri perlindungan: The device is equipped with multiple protections including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.
BSMOOM Jump Starter with multiple safety protections

Image: BSMOOM Jump Starter with multiple safety protections. This image highlights the advanced safety features of the BSMOOM jump starter, including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

2. Produk Lebihview & Komponen

The BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit is a versatile device designed for emergency vehicle starting, tire inflation, and portable power supply.

2.1 Apa yang ada di dalam Kotak

Contents included in the BSMOOM Jump Starter and Air Compressor Kit

Image: Contents included in the BSMOOM Jump Starter and Air Compressor Kit. This image displays all items included in the product box: the BSMOOM jump starter unit, smart jumper clamps, air hose, various air nozzles, USB charging cable, and the user manual.

  • BSMOOM 7000A Jump Starter Unit
  • Pelompat Pintar Clamps (Merah untuk Positif, Hitam untuk Negatif)
  • Air Hose with Quick Connector
  • Various Air Nozzles (for different inflatables)
  • Kabel Pengecas USB-C
  • Manual Pengguna
  • Sarung Penyimpanan

2.2 Ciri-ciri Produk

  • Arus Puncak 7000A: Capable of starting all gas engines and up to 10.0L diesel engines.
  • Pemampat Udara 150 PSI: Cordless inflator with tire pressure detection for various inflatables.
  • Bank Kuasa 26800mAh: Dual USB-A outputs and one USB-C input/output for charging digital devices.
  • Paparan LCD 3.4": Clear display for battery status, pressure readings, and operational modes.
  • Lampu LED Dwi: Features Normal, SOS, and Strobe modes for emergency illumination.
  • Perlindungan Keselamatan Lanjutan: 10 types of protection for safe operation.
  • Operasi Semua Cuaca: Designed to function in extreme temperatures from -4°F to 140°F.
BSMOOM 7000A Jump Starter and Air Compressor Kit with accessories

Image: BSMOOM 7000A Jump Starter and Air Compressor Kit with accessories. This image displays the BSMOOM 7000A Jump Starter and Air Compressor Kit, including the main unit, heavy-duty jumper clamps (red and black), the flexible air hose with various nozzles, USB charging cables, and a compact carrying case.

Key features of BSMOOM Powerful Car Jump Starter

Image: Key features of BSMOOM Powerful Car Jump Starter. This graphic highlights key features of the BSMOOM jump starter: 24 months standby time, 99Wh power, LCD screen, 2024 full chip upgrade, 3 LED modes, 10 protection mechanisms, and one-second startup capability.

2.3 Panel Kawalan dan Port

BSMOOM Jump Starter control panel and button functions

Image: BSMOOM Jump Starter control panel and button functions. An illustration detailing the control panel of the BSMOOM jump starter, showing the functions of each button: Preset Air Pressure Up, Mode/Unit Switching, Power/Inflate Start, Light, and Preset Air Pressure Decrease.

  • Paparan LCD: Shows battery level, pressure, and mode.
  • Butang "M": Mode/Unit Switching (e.g., PSI, BAR, KPA).
  • Butang "OK": Power/Inflate Start.
  • Light Button (*): Activates LED flashlight modes (Normal, SOS, Strobe).
  • Butang "+": Preset Air Pressure Increase.
  • Butang "-": Preset Air Pressure Decrease.
  • Pelabuhan Mula Lompat: Untuk menyambungkan jumper pintaramps.
  • Pelabuhan Hos Udara: For connecting the air hose.
  • Port Output USB-A (x2): Untuk mengecas peranti luaran.
  • USB-C Input/Output Port (x1): For charging the jump starter or external devices.

3. Persediaan

3.1 Mengecas Pemula Lompat

Before first use, fully charge the BSMOOM jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

  1. Connect the provided USB-C charging cable to the USB-C input/output port on the jump starter.
  2. Sambungkan hujung kabel USB-C yang satu lagi pada penyesuai dinding USB (tidak disertakan) atau port USB berkuasa.
  3. The LCD display will show the charging status. The battery indicator will fill up as it charges.
  4. Pengecasan selesai apabila penunjuk bateri menunjukkan penuh.

4. Arahan Operasi

4.1 Lompat Memulakan Kenderaan

Ensure the jump starter is sufficiently charged (at least 50% battery recommended).

  1. Langkah 1: Insert the blue plug of the smart jumper clamps into the jump start port on the BSMOOM unit. Ensure it is fully inserted.
  2. Langkah 2: Sambungkan cl merah (+).amp to the positive terminal of the vehicle's battery. Connect the black (-) clamp ke terminal negatif bateri kenderaan.
  3. Langkah 3: Once connected, the smart clamps will indicate readiness (e.g., a solid green light or specific display on the unit). Turn on your vehicle's engine.
  4. Langkah 4: Immediately after the engine starts, remove the clamps from the vehicle battery. First, remove the black (-) clamp, maka cl merah (+)amp. Disconnect the smart clamps daripada unit pemula lompat.
BSMOOM Jump Starter connected to a car battery for emergency starting

Image: BSMOOM Jump Starter connected to a car battery for emergency starting. An illustration demonstrating the BSMOOM jump starter connected to a car battery, highlighting its capability to start various vehicles including those with 12V, all gas, and 10L diesel engines.

Step-by-step guide for jump starting a car with BSMOOM Jump Starter

Image: Step-by-step guide for jump starting a car with BSMOOM Jump Starter. A four-step visual guide detailing the quick start car procedure: 1. Insert the starting cable into the starter. 2. Connect the clamps to the car's battery. 3. Turn on the engine. 4. Remove the clamps immediately after starting.

4.2 Menggunakan Pemampat Udara

  1. Connect the air hose to the air hose port on the jump starter unit.
  2. Attach the appropriate nozzle to the air hose for the item you wish to inflate (e.g., tire valve, ball needle).
  3. Connect the nozzle to the item. The LCD display will show the current pressure.
  4. Press the "M" button to select the desired unit (PSI, BAR, KPA).
  5. Use the "+" and "-" buttons to set the desired target pressure.
  6. Press the "OK" button to start inflation. The compressor will automatically stop when the target pressure is reached.
  7. Putuskan sambungan muncung dan hos udara.
BSMOOM Jump Starter's air compressor inflating a car tire

Image: BSMOOM Jump Starter's air compressor inflating a car tire. The BSMOOM device is shown actively inflating a car tire, emphasizing its ultra-fast 150 PSI cordless inflation feature with tire pressure detection. It indicates inflation times for different PSI levels.

BSMOOM Air Pump inflating various items like car tires, motorcycle tires, bicycle tires, and balls

Image: BSMOOM Air Pump inflating various items. The image demonstrates the versatility of the BSMOOM 150 PSI ultra-fast inflation wireless digital air pump, showing its use for inflating car tires, motorcycle tires, bicycle tires, and sports balls.

4.3 Menggunakan sebagai Power Bank

  1. Connect your digital device's charging cable to one of the USB-A output ports or the USB-C input/output port on the jump starter.
  2. Connect the other end of the cable to your digital device.
  3. Pemula lompat akan mula mengecas peranti anda secara automatik.
BSMOOM Jump Starter used as a power bank to charge mobile devices

Image: BSMOOM Jump Starter used as a power bank to charge mobile devices. This image illustrates the BSMOOM jump starter functioning as a power bank, charging a smartphone and tablet via its USB-A and USB-C output ports, suitable for various digital devices.

4.4 Menggunakan Lampu Suluh LED

  1. Press the Light button (*) once to turn on the flashlight in Normal mode.
  2. Press the Light button (*) again to cycle through modes: SOS → Strobe → Off.
BSMOOM Jump Starter's bright LED flashlight with SOS and Strobe modes

Image: BSMOOM Jump Starter's bright LED flashlight with SOS and Strobe modes. A visual representation of the BSMOOM jump starter's integrated bright LED flashlight, showcasing its 400-Lumen output and three modes: Normal, SOS, and Strobe, useful for emergencies.

5. Penyelenggaraan

  • mengecas: Recharge the jump starter every 3-6 months, even if not used, to prolong battery life.
  • Pembersihan: Lap unit dengan kain kering dan lembut. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
  • Storan: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its carrying case for protection.
  • Penjagaan Kabel: Inspect jumper cables and air hose for any damage before each use.

6. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
Peranti tidak dihidupkan.Bateri habis.Caskan penghidup lompat sepenuhnya.
Kenderaan tidak bermula.cl yang salahamp sambungan (kekutuban songsang).Pastikan lampu merahamp is on positive (+), black on negative (-). The smart clamps have protection against this.
Kenderaan tidak bermula.Bateri pemula lompat terlalu rendah.Ensure jump starter is at least 50% charged.
Pemampat udara tidak mengembang.Hos udara tidak disambungkan dengan kukuh.Periksa semua sambungan untuk sesak.
Pemampat udara tidak mengembang.Target pressure not set or set too low.Set the desired target pressure using the +/- buttons.
Device gets warm during use.Normal operation, especially during high load (jump starting, prolonged inflation).Allow the device to cool down if it becomes excessively hot. The device has over-temperature protection.

7. Spesifikasi

CiriPerincian
ModelB05
Arus Puncak7000 Amps
Kapasiti Bateri26800mAh (99Wj)
Keserasian EnjinSemua Enjin Gas, sehingga 10.0L Enjin Diesel
Tekanan Pemampat UdaraMaksimum 150 PSI
Dimensi Produk9.84"W x 6.5"H x 4.33"D
Berat Barang2.96 paun
Suhu Operasi-4°F hingga 140°F
PaparanPaparan LCD 3.4"
Output Cahaya LED400 Lumens (Dual LED Lights)
BSMOOM Jump Starter operating in extreme temperatures

Image: BSMOOM Jump Starter operating in extreme temperatures. This image illustrates the BSMOOM jump starter's capability to operate reliably in extreme weather conditions, from 140°F (hot) to -4°F (cold).

8. Waranti & Sokongan

BSMOOM is committed to providing high-quality products and excellent customer service.

  • 12 Months Product Quality Commitment: Your purchase is covered by a 12-month quality commitment from the date of purchase.
  • 30 Days Unconditional Return Policy: You may return the product within 30 days of purchase for any reason.
  • Sokongan Pelanggan 24/7: For any questions, concerns, or support needs, please contact BSMOOM customer service. We aim to provide a quick reply within 24 hours.

For support, please refer to the contact information provided with your product packaging or visit the official BSMOOM webtapak.

© 2024 BSMOOM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.