Teslong NTS300 Industrial Endoscope User Manual

Produk Selesaiview & Ciri-ciri

The Teslong NTS300 is a versatile industrial endoscope designed for detailed inspections in various environments. It features a dual-lens system, a high-definition display, and robust construction for reliable performance.

• Dual Lens Inspection Camera: Equipped with a main lens and a side lens, each with adjustable LED lights for comprehensive viewing.
• 5" 720P HD IPS Screen: A large, clear, and durable industrial-grade screen for real-time viewing.
• Reka bentuk kalis air IP67: The camera probe is waterproof, allowing for use in wet or submerged conditions.
• Lampu LED boleh laras: Multiple high-intensity LEDs ensure clear visibility in dark inspection areas.
• Bateri Tahan Lama: A built-in 5000mAh rechargeable battery provides approximately 4.5 hours of continuous operation.
• Antara Muka Mesra Pengguna: Simple controls and easy data transfer via USB Type-C and TF card slot.
• Semi-Rigid Gooseneck Cable: The flexible cable retains its shape for precise positioning during inspections.

Figure 1: Teslong NTS300 Industrial Endoscope with its flexible probe and protective carrying case.

Figure 2: Close-up of the dual-lens endoscope probe, highlighting the front-view dan sisi-view cameras with their respective LED lights.

Figure 3: The 5-inch 720P HD IPS screen, designed for clear and bright image display during inspections.

Persediaan

1. Buka Pembungkusan Kandungan: Carefully remove all components from the carrying case. Verify that the NTS300 Inspection Monitor, Camera Probe, USB-C Charging Cable, User Manual, and accessories (hook, magnet, mirror) are present.
2. Mengecas Bateri: Connect the USB-C Charging Cable to the monitor's USB Type-C port and a suitable USB power adapter (not included). The battery indicator on the screen will show charging status. A full charge takes approximately 5 hours.
3. Pasangkan Prob Kamera: Align the connector of the camera probe with the Cable Interface Port on the top of the monitor. Gently push and twist the locking ring to secure the probe.
4. Masukkan Kad TF: Locate the TF card slot on the side of the monitor. Insert the provided 32GB TF card (or your own, Class 10 or higher) until it clicks into place. This card is essential for saving photos and videos.

Arahan Operasi

1. Hidupkan/Mati Kuasa: Press and hold the power button (marked with a power icon) on the handle to turn the device on or off.
2. Laraskan Sudut Skrin: Use the button on the side of the handle to adjust the screen's tilt for optimal viewing.
3. Control LED Lights: Press the light button (marked with a lightbulb icon) on the control panel to cycle through different brightness levels for the camera's LED lights (low, medium, high, off).
4. Switch Between Lenses: The NTS300 features dual lenses. Use the dedicated button on the camera probe cable to switch between the front-view dan sisi-view kamera.
5. Ambil Foto: Secara langsung view mode, press the camera icon button on the control panel to capture a still image.
6. Rakam Video: Press the mode button to switch to video recording mode. Then, press the record button (usually the camera icon again, or a dedicated record button) to start/stop recording.
7. Use Built-in Flashlight: The handle features a 1W CREE LED flashlight. Use the flashlight switch on the handle to turn it on/off for additional illumination in dark areas.
8. Navigasi Menu: Use the directional arrow buttons (Up, Down, Left, Right) and the OK button to navigate through the device's settings and playback options.

Penyelenggaraan

• Membersihkan Probe: After use in wet or dirty environments, wipe the IP67 waterproof camera probe with a clean, damp kain. Pastikan ia kering sebelum disimpan.
• Penjagaan Bateri: Recharge the 5000mAh battery regularly to maintain its lifespan. Avoid completely draining the battery frequently. Store the device with a partial charge if not used for extended periods.
• Storan: Always store the NTS300 Inspection Monitor and Camera Probe in the provided carrying case to protect them from dust, moisture, and physical damage.
• Penjagaan Aksesori: Keep the hook, magnet, and mirror accessories clean and stored securely in their designated compartments within the case.

Menyelesaikan masalah

• Tiada Imej pada Skrin: Ensure the camera probe is securely connected to the monitor. Check if the battery is charged.
• Kualiti Imej Lemah: Adjust the LED light brightness. Clean the camera lens if it appears dirty. Ensure the focus range (30-100mm for main, 20-60mm for side) is appropriate for your inspection distance.
• Peranti Tidak Membalas: Try resetting the device by locating the small reset button (often recessed) and pressing it with a thin object like a paperclip.
• Tidak Boleh Menyimpan Foto/Video: Verify that a TF card is inserted correctly and has sufficient free space. Ensure the card is Class 10 or higher.

Spesifikasi

Video Produk Rasmi

Waranti & Sokongan

For detailed warranty information and further support, please refer to the official documentation provided with your product or visit the Teslong brand store.

• Panduan Pengguna (PDF): Muat turun Panduan Pengguna
• Maklumat Keselamatan (PDF): Muat turun Maklumat Keselamatan
• Teslong Brand Store: Lawati Kedai