ONAMOR Digital Ozone Generator NM-009D-Grey-01 Instruction Manual

1. Maklumat Keselamatan Penting

WARNING: Ozone is a powerful oxidant and can be harmful if inhaled.

• Use in Unoccupied Spaces ONLY: This ozone generator must only be operated in spaces that are completely free of humans, pets, and plants.
• Pengudaraan: After each treatment cycle, ensure the treated area is thoroughly ventilated for at least 30 minutes to several hours before re-entry. The ozone smell should dissipate before re-occupying the space.
• No Entry Sign: Always use the provided 'NO ENTRY' sign on the door of the treated area to prevent accidental entry.
• penempatan: Do not place the unit near furnace intake vents or in areas where air circulation is restricted.

Failure to follow these safety instructions can result in serious health risks.

Image: The 'NO ENTRY' sign provided with the ONAMOR Digital Ozone Generator, to be used during operation for safety.

2. Produk Lebihview

The ONAMOR Digital Ozone Generator is designed for high-capacity odor removal in various environments, including homes, cars, basements, and offices. It utilizes ozone (O3) to neutralize tough odors caused by smoke, pets, cooking, and more.

Image: The ONAMOR Digital Ozone Generator, a compact and portable device for odor elimination.

Ciri-ciri Utama:

• Kawalan Sentuhan Intuitif: Features six buttons and a user-friendly digital display for easy operation.
• Tetapan Pemasa Fleksibel: Adjustable timer from 0-24 hours in 5-minute increments, with a 'Cycle' function for half-hour intervals.
• Strong Ozone Output: Generates 180,000 mg/h of ozone, capable of treating spaces up to 8,000 square feet.
• Kipas Berkuasa: Equipped with a 2600 RPM fan for rapid ozone diffusion, cleaning 100 sq. ft. in approximately 7 minutes.
• Pembinaan Tahan Lama: Robust all-aluminum alloy shell with an independent ozone module, upgraded ceramic ozone plate, and three replaceable fuses.
• 5-Second Delay Start: Provides a brief delay after setting to allow users to leave the treatment area safely.
• Post-Treatment Fan Circulation: For cycles over 30 minutes, ozone generation stops 5 minutes before the end, while the fan continues to circulate to help dissipate residual ozone odor.

3. Kandungan Pakej

Upon unpacking your ONAMOR Digital Ozone Generator, please ensure all items listed below are present:

• 1 x ONAMOR Digital Ozone Generator (Grey)
• 1 x AC Power Cable (1.5M)
• 1 x Manual Pengguna
• 1 x Warning Card ('NO ENTRY' door hanger)
• 3 x Glass Fuses (preinstalled, plus spares)
• 1 x Ceramic Ozone Plate (preinstalled)
• 1 x Washable Stainless Filter (preinstalled)

Image: All items included in the ONAMOR Digital Ozone Generator package.

4. Persediaan

1. Sediakan Kawasan: Remove all humans, pets, and plants from the room or vehicle to be treated.
2. Clean Odor Source: For best results, clean or remove the source of the odor as much as possible before ozone treatment.
3. penempatan: Place the ozone generator in a central location within the treatment area, ensuring it is on a stable, flat surface. Avoid placing it directly against walls or furniture to allow for optimal air circulation.
4. Sambungkan Kuasa: Plug the AC power cable into the generator and then into a standard electrical outlet.
5. Selamatkan Kawasan: Close all windows and doors in the treatment area. Place the 'NO ENTRY' warning card on the door handle.

Image: Visual guide for the four-step process of using the ozone generator.

5. Arahan Operasi

Panel Kawalan Terlaluview:

• Paparan Digital: Shows current time settings.
• OZONE Button: Short press to turn ozone generation ON/OFF.
• Butang TIME+ / TIME-: Adjust treatment time in 5-minute increments. Long press for quick settings.
• CYCLE Button: Quickly set 30-minute interval cycles (e.g., 3H, 6H, 9H, etc.).
• Butang MULA: Short press to pause/start operation. Long press to turn the unit ON/OFF.
• Butang TAHAN: Activates 24-hour continuous operation.

Imej: Terperinci view of the touch control panel and its functions.

Memulakan Operasi:

1. Hidupkan kuasa: Long press the 'START' button to turn the unit on.
2. Set Treatment Time: Use the 'TIME+' or 'TIME-' buttons to set the desired treatment duration. Refer to the 'Recommended Operating Times' table below. For continuous operation, press 'HOLD'. For interval cycles, press 'CYCLE'.
3. Initiate Cycle: Short press the 'START' button to begin the ozone generation. The unit will emit a 5-second delay buzzer, allowing you time to safely exit the area.
4. Exit the Area: Immediately leave the treated space and ensure no one enters until the cycle is complete and the area has been thoroughly ventilated.

Menghentikan Operasi:

• The unit will automatically shut off after the set time has elapsed.
• To manually stop the unit, long press the 'START' button.

Video Guide: How to Operate

Video: A step-by-step guide on how to operate the ONAMOR Digital Ozone Generator, including setting the timer and starting the ozone treatment.

6. Recommended Operating Times

The optimal treatment time depends on the size of the area and the intensity of the odor. The following table provides general recommendations:

Nota: Always ensure the space is unoccupied during treatment. Adjust times based on odor severity and ventilation capabilities.

Image: Recommended operating times for various area sizes.

7. Penyelenggaraan

Penyelenggaraan tetap memastikan prestasi optimum dan jangka hayat penjana ozon anda.

Membersihkan Penapis Udara:

The unit is equipped with a washable stainless steel filter to block impurities. Clean it regularly, especially in dusty environments.

1. Cabut palam unit daripada sumber kuasa.
2. Locate the fan cover on the back of the unit.
3. Carefully remove the fan cover and the stainless steel filter.
4. Wash the filter with water and mild soap. Rinse thoroughly and allow it to dry completely before reinstallation.
5. Reattach the filter and fan cover.

Image: Instructions for detaching and cleaning the fan filter.

Mengganti Fius:

The unit comes with three replaceable fuses for added dependability.

1. Cabut palam unit daripada sumber kuasa.
2. Locate the fuse compartment next to the power inlet on the back of the unit.
3. Use a small flat-head screwdriver to gently pry open the fuse compartment.
4. Remove the old fuse and replace it with a new one (ensure it's the correct rating).
5. Tutup petak fius dengan selamat.

Replacing Ozone Plate:

The ceramic ozone plate is designed for long life but may require replacement over time. Consult the full user manual for detailed instructions on replacing the ozone plate.

8. Penyelesaian masalah

If you encounter issues with your ONAMOR Digital Ozone Generator, refer to the following common troubleshooting steps:

• Unit Tidak Dihidupkan:
  • Ensure the power cable is securely plugged into both the unit and a working electrical outlet.
  • Check the fuses. Replace if blown (refer to Maintenance section).
  • Ensure the 'START' button is long-pressed to power on the unit.
• No Ozone Output:
  • Verify that the ozone generation is activated via the 'OZONE' button and the timer is set.
  • Check if the ceramic ozone plate is clean and properly installed.
• Weak Odor Removal:
  • Increase the treatment time or consider a 'HOLD' (continuous) cycle for severe odors.
  • Ensure the room is properly sealed during treatment.
  • Clean the air filter and ozone plate.

For further assistance, please contact ONAMOR customer support.

9. Spesifikasi

Image: Key specifications and dimensions of the ONAMOR Digital Ozone Generator.

10. Waranti dan Sokongan

ONAMOR is committed to providing reliable products and excellent customer service. We have specialized in ozone machine manufacturing for over 7 years.

If you have any questions or concerns regarding your ONAMOR Digital Ozone Generator, please do not hesitate to reach out to our customer support team. We aim to provide a satisfactory solution within 24 hours.

Nota: This product is not for sale in California.