be quiet! Pure Base 501 Airflow Window Black ATX Mid-Tower PC Case

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your be quiet! Pure Base 501 Airflow Window Black ATX Mid-Tower PC Case. Designed for optimal cooling and quiet operation, this case supports a wide range of components and offers a clean, stylish aesthetic with its tempered glass side panel and mesh front.

2. Maklumat Keselamatan

• Sentiasa putuskan sambungan bekalan kuasa dari soket dinding sebelum melakukan sebarang pemasangan atau penyelenggaraan di dalam bekas PC.
• Kendalikan komponen dengan berhati-hati untuk mengelakkan kerosakan akibat nyahcas elektrostatik. Pertimbangkan untuk menggunakan tali pergelangan tangan anti-statik.
• Berhati-hati dengan tepi tajam di dalam bekas.
• Jangan halang bukaan pengudaraan. Pastikan aliran udara yang mencukupi di sekeliling bekas.
• Keep the case away from direct sunlight, heat sources, and liquids.
• Produk ini bertujuan untuk kegunaan dalaman sahaja.

3. Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej:

• be quiet! Pure Base 501 Airflow Window Black PC Case
• 2x pre-installed be quiet! Pure Wings 3 PWM 140mm fans (1x front, 1x rear)
• Kotak aksesori yang mengandungi:
  • Various screws for motherboard, SSDs, HDDs, and power supply
  • Pengikat kabel
  • Manual pengguna

4. Persediaan dan Pemasangan

Follow these steps to install your PC components into the Pure Base 501 Airflow Window case.

4.1. Menyediakan Kes

• Letakkan bekas di atas permukaan yang stabil dan rata.
• Remove the tempered glass side panel by unscrewing the thumb screws at the rear and carefully pulling the panel away.
• Remove the solid steel side panel (opposite side) by unscrewing the thumb screws and sliding it backward.
• The front mesh panel can be removed by pulling it from the bottom edge to access front fan mounts.
• The top panel can be removed to access top fan/radiator mounts.

4.2. Pemasangan Papan Induk

• Ensure the correct standoffs are installed for your motherboard form factor (ATX, Micro-ATX, Mini-ITX). The case comes with pre-installed standoffs for ATX.
• Pasangkan pelindung I/O ke dalam bukaan belakang bekas.
• Letakkan papan induk anda dengan berhati-hati pada penyangga, selaraskan lubang skru.
• Selamatkan papan induk dengan skru yang sesuai dari kotak aksesori.

4.3. Pemasangan Unit Bekalan Kuasa (PSU).

• Mount the PSU to the bracket at the rear bottom of the case.
• Slide the PSU with the bracket into the PSU shroud from the rear of the case.
• Secure the PSU bracket with screws.

4.4. Pemasangan Pemacu Storan

• HDD 3.5": Install up to two 3.5" drives in the removable HDD cage located under the PSU shroud. Slide the drives into the trays and secure them.
• 2.5" SSDs/HDDs: Install up to five 2.5" drives. Two mounts are located behind the motherboard tray, and three can be installed on the HDD cage. Secure drives with screws.

4.5. Pemasangan Kad Grafik (VGA) dan Kad Pengembangan

• Tanggalkan penutup slot pengembangan yang diperlukan di bahagian belakang sarung.
• Masukkan kad grafik atau kad pengembangan lain ke dalam slot PCIe pada papan induk.
• Selamatkan kad dengan skru.

4.6. Pemasangan Kipas dan Radiator

• The case comes with two 140mm Pure Wings 3 PWM fans pre-installed (one front, one rear).
• Depan: Supports 2x 140mm or 3x 120mm fans. Radiators up to 360mm.
• Atas: Supports 2x 140mm or 2x 120mm fans. Radiators up to 140mm.
• belakang: Supports 1x 140mm or 1x 120mm fan. Radiators up to 140mm.
• Ensure fans are oriented correctly for optimal airflow (intake at front, exhaust at rear/top).

4.7. Connecting Front I/O Ports

• Connect the USB 3.2 Gen.2 Type C, USB 3.2 Type A (x2), HD Audio, power switch, reset button, and HDD indicator cables from the front panel to the corresponding headers on your motherboard.

4.8. Pengurusan Kabel

• Utilize the cable routing cutouts and Velcro straps behind the motherboard tray to organize cables. This improves airflow and aesthetics.
• Ensure no cables interfere with fan blades.

5. Mengendalikan Casing PC

Once all components are installed and connected, replace the side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front panel to start your system.

• The Pure Base 501 Airflow Window is designed for high airflow, ensuring efficient cooling for your components.
• The pre-installed Pure Wings 3 PWM fans offer a balance of performance and quiet operation.
• Monitor your system temperatures using software to ensure optimal performance.

6. Penyelenggaraan

Penyelenggaraan tetap membantu memastikan prestasi optimum dan jangka hayat komponen PC anda.

• Penapis Habuk: The case features removable dust filters on the front, top, and bottom. Regularly clean these filters by removing them and gently brushing or washing off accumulated dust. Ensure they are completely dry before re-installing.
• Pembersihan Dalaman: Periodically open the case and use compressed air to remove dust from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
• Pembersihan Luaran: Lap permukaan luar dengan lembut, damp kain. Elakkan bahan kimia yang keras atau bahan yang melelas.

7. Penyelesaian masalah

Jika anda menghadapi masalah, rujuk langkah penyelesaian masalah biasa berikut:

For further assistance, please contact be quiet! customer support.

8. Spesifikasi

9. Waranti dan Sokongan

Your be quiet! Pure Base 501 Airflow Window PC Case comes with a Waranti pengilang selama 3 tahun dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.

For warranty claims, technical support, or any questions regarding your product, please visit the official be quiet! website or contact their customer service department. Please have your proof of purchase and product model information ready when contacting support.

Official be quiet! Webtapak: www.bequiet.com