LEDVANCE Flash Car Emergency Light User Manual

1. Produk Lebihview

The LEDVANCE Flash Car Emergency Light is a versatile mobile lighting device designed for outdoor use, particularly in emergency situations. It features a robust aluminum housing and integrates essential tools for roadside safety.

Key features include a glass hammer for breaking windows and a seat belt knife for cutting seat belts, enhancing its utility in critical moments. The light offers multiple operating modes for various lighting needs.

This product is classified as a surrounding product, meaning its included light source(s) can be disassembled for separate verification. The light source within this device is of energy efficiency class G.

Image: The LEDVANCE Flash Car Emergency Light, a compact, black, cylindrical device with a light at one end and a textured grip, designed for emergency use.

2. Maklumat Keselamatan

• Keselamatan Bateri: Gunakan hanya jenis bateri yang ditentukan (4 bateri AAA). Jangan campurkan bateri lama dan baharu, atau jenis bateri yang berlainan. Pastikan polariti yang betul semasa memasukkan bateri. Tanggalkan bateri jika peranti tidak akan digunakan untuk tempoh yang lama.
• Alat Kecemasan: The glass hammer and seat belt knife are sharp and designed for emergency use only. Handle with extreme care to prevent injury. Keep out of reach of children.
• Sumber Cahaya: Do not look directly into the light beam, as it may cause temporary vision impairment.
• Keadaan Persekitaran: This device is designed for outdoor use but should not be submerged in water. Avoid extreme temperatures.

3. Kandungan Pakej

Sila semak pakej untuk item berikut:

• 1 x LEDVANCE Flash Car Emergency Light (Model: FLASHL CAR BTRY EM FS1 LEDV)

4. Persediaan

4.1 Pemasangan Bateri

1. Locate the battery compartment. This is typically found by twisting or unscrewing a section of the light's body.
2. Insert 4 AAA batteries (not included) into the compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
3. Tutup petak bateri dengan selamat.

5. Arahan Operasi

5.1 Menukar Mod

The LEDVANCE Flash Car Emergency Light features a convenient button for switching between its four operating modes:

• Akhbar pertama: Activates bright light mode (100 lumens).
• Akhbar ke-2: Switches to soft light mode (70 lumens).
• Akhbar ke-3: Activates SOS mode (Morse code for SOS).
• Akhbar ke-4: Activates flashing mode.
• Subsequent presses will cycle through the modes or turn the light off, depending on the model's specific sequence.

5.2 Adjusting Light Beam Angle

The angle of the light beam can be adjusted by turning the lens of the device. Rotate the lens clockwise or counter-clockwise to achieve the desired focus or spread of light.

5.3 Hayat Bateri

The light provides approximately 1.5 hours of operation at full brightness (100 lumens) with fresh batteries.

6. Penyelenggaraan

• Pembersihan: Lap peranti dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Penggantian Bateri: Replace all 4 AAA batteries when the light output diminishes or the device stops functioning. Refer to Section 4.1 for battery installation.
• Storan: Store the light in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.

7. Penyelesaian masalah

• Lampu tidak menyala:
  • Periksa sama ada bateri dimasukkan dengan betul dengan kekutuban yang betul.
  • Gantikan bateri lama atau habis dengan yang baru.
  • Pastikan petak bateri ditutup dengan selamat.
• Cahaya malap atau berkelip-kelip:
  • Bateri mungkin rendah. Gantikan dengan bateri baru.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information or technical support, please refer to the documentation provided with your purchase or contact LEDVANCE customer service directly. Keep your proof of purchase for warranty claims.