Fein Cordless Angle Grinder CCG 18-115-12 AS Instruction Manual

1. Pengenalan

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Fein Cordless Angle Grinder CCG 18-115-12 AS. This powerful and dust-resistant tool is designed for cutting, grinding, and deburring work on various materials. It features an 18V brushless motor, a 115 mm grinding wheel diameter, and is compatible with AMPShare ProCORE batteries.

2. Arahan Keselamatan

Sentiasa patuhi langkah keselamatan berikut untuk mengelakkan kecederaan dan kerosakan pada alat:

• Pakai Alat Pelindung Diri (PPE): Always use safety glasses, hearing protection, gloves, and a dust mask.
• Bahan Kerja Selamat: Ensure the material being worked on is firmly clampdiikat atau diamankan untuk mengelakkan pergerakan semasa operasi.
• Maintain Proper Grip: Hold the angle grinder firmly with both hands, ensuring a stable stance.
• Semak Kerosakan: Before each use, inspect the tool, battery, and accessories for any damage. Do not use damaged equipment.
• Gunakan Aksesori yang Betul: Only use grinding and cutting discs that are rated for the tool's speed and diameter (115 mm).
• Adjust Guard: Ensure the protective guard is correctly positioned to deflect sparks and debris away from you.
• Elakkan melampaui batas: Maintain balance and control at all times.
• Pastikan Kawasan Kerja Kosong: Remove flammable materials and ensure adequate ventilation.
• Putuskan Kuasa: Sentiasa keluarkan pek bateri sebelum membuat sebarang pelarasan, menukar aksesori atau melakukan penyelenggaraan.
• Mulakan semula Perlindungan: The tool features restart protection. If power is interrupted, the tool will not restart automatically when power is restored.
• Electronic Overload Protection: The tool will shut off if overloaded to prevent damage. Reduce pressure and allow the tool to cool.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• 1 x Fein Cordless Angle Grinder CCG 18-115-12 AS
• 1 x Separation Protection Cover
• 1 x Tool-free Quick Release Nut
• 1 x Anti-vibration Handle
• 1 x Key (for disc changes if not using quick release)
• 1 x Plastic Tool Box (L-BOXX 238)

4. Persediaan

Before operating the angle grinder, ensure it is properly assembled and configured.

4.1 Pemasangan Bateri

1. Ensure the battery is fully charged. The Fein Cordless Angle Grinder is compatible with all 18V AMPShare ProCORE batteries.
2. Jajarkan pek bateri dengan port bateri pada alat.
3. Luncurkan bateri ke dalam port sehingga ia mengklik dengan selamat ke tempatnya.
4. Untuk mengeluarkan, tekan butang pelepas pada bateri dan luncurkannya keluar.

4.2 Pelarasan Pengawal

The separation protection cover must always be used. Adjust its position to provide maximum protection for the specific application.

• Loosen the guard's locking mechanism.
• Rotate the guard to the desired position, ensuring it deflects sparks and debris away from the operator.
• Tighten the locking mechanism securely.

4.3 Disc Installation (Grinding/Cutting)

Always ensure the battery is removed before changing discs.

1. Tekan dan tahan butang kunci gelendong.
2. If using the tool-free quick release nut: Unscrew the quick release nut by hand. Remove the old disc and the lower flange.
3. Place the new 115 mm grinding or cutting disc onto the spindle, ensuring it sits correctly on the lower flange.
4. Screw the quick release nut back on and tighten it firmly by hand. Release the spindle lock.
5. If using a standard nut and key: Use the provided key to loosen and tighten the nut.

Image: A user demonstrating the installation of a grinding disc onto the angle grinder. The tool-free quick release nut is visible.

4.4 Anti-vibration Handle Attachment

Attach the anti-vibration handle to either side of the gear housing for improved comfort and control during operation.

• Screw the anti-vibration handle into one of the threaded holes on the side of the grinder head.
• Tighten it securely by hand.

5. Arahan Operasi

Familiarize yourself with the tool's controls and proper operating techniques.

5.1 Powering On/Off and Speed Preselection

• Menghidupkan: Slide the power switch forward. The tool features a soft start function for smooth power-up.
• Matikan: Slide the power switch backward to the OFF position.
• Electronic Speed Preselection: Use the speed dial to select the desired idle speed between 2,500 and 8,500 min⁻¹. Adjust the speed according to the material and application.

5.2 Cutting and Grinding Techniques

Always maintain a firm grip and stable body position. Let the tool do the work; avoid excessive pressure.

Image: A worker grinding a metal bar with the Fein angle grinder, demonstrating proper technique and safety gear.

• Pengisaran: Apply light, even pressure. Move the grinder smoothly across the surface. The tool's vibration damper helps ensure smooth operation.
• Memotong: For cutting, use a cutting disc and ensure the workpiece is securely clamped. Make straight cuts, allowing the disc to cut without forcing it.

Image: A worker cutting a metal pipe with the Fein angle grinder, showing the sparks generated during the process.

Image: A worker performing a cutting operation on a metal bar with the Fein angle grinder, highlighting the tool's performance.

5.3 Ciri Lanjutan

• Blocking Monitoring: The tool is equipped with blocking monitoring, which helps prevent kickback if the disc jams.
• Pemantauan Suhu: Innovative cooling fin technology and temperature monitoring protect the motor and battery from overheating during intensive use.

6. Penyelenggaraan

Penyelenggaraan tetap memastikan jangka hayat dan prestasi optimum penggiling sudut anda.

• Pembersihan: The robust motor housing is designed to be dust resistant. Regularly clean the tool's ventilation slots and exterior with a soft brush or compressed air to remove dust and debris. Ensure the battery is removed before cleaning.
• Pemeriksaan Cakera: Before each use, inspect grinding and cutting discs for cracks, chips, or excessive wear. Replace damaged or worn discs immediately.
• Penjagaan Bateri: Store batteries in a cool, dry place. The Coolpack 2.0 technology helps extend battery life; however, avoid fully discharging batteries and charge them regularly.
• Pemeriksaan Am: Periodically check all screws and fasteners for tightness. Ensure the guard operates smoothly and locks securely.

7. Penyelesaian masalah

Rujuk bahagian ini untuk isu biasa dan penyelesaiannya.

8. Spesifikasi

Technical data for the Fein Cordless Angle Grinder CCG 18-115-12 AS:

• model: CCG 18-115-12 AS
• Bateri Voltage: 18 V
• Keserasian Bateri: Li-ion/ProCORE Li-ion (AMPShare compatible)
• Motor: Tanpa berus
• Kelajuan Terbiar: 2,500 - 8,500 min⁻¹ (stepless electronic speed preselection)
• Diameter Roda Pengisaran: 115 mm
• Elastic Sanding Disc Diameter: 115 mm
• Bebibir: M 14
• Berat (tanpa bateri): 2.20 kg
• Dimensi Produk (L x W x H): 35.7 x 25.3 x 44.2 cm
• Bahan: Metal, aluminium, copper, plastic
• Fungsi: Soft start, Restart protection, Electronic overload protection, Electronic speed preselection, Blocking monitoring, Vibration damper (4 additional), Temperature monitoring (Coolpack 2.0 technology)

9. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please refer to the official Fein website or contact your authorized Fein dealer. Keep your purchase receipt as proof of purchase.

Fein Official Webtapak: www.fein.com